public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Roel Kluin <12o3l@tiscali.nl>
To: Jeff Garzik <jeff@garzik.org>
Cc: linux-scsi@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mvsas: fill in error info record bits
Date: Wed, 05 Mar 2008 20:28:34 +0100	[thread overview]
Message-ID: <47CEF462.8060607@tiscali.nl> (raw)
In-Reply-To: <20080305190304.GA13286@havoc.gtf.org>

Jeff Garzik wrote:
> This describes the first dword of struct mvs_err_info, two-dword error
> information record that is returned when RXQ_ERR bit is asserted.
> 
> These bits are necessary for proper error handling.
> 
> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
> ---
> diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
> index d4a6ac3..ec4dda0 100644
> --- a/drivers/scsi/mvsas.c
> +++ b/drivers/scsi/mvsas.c
> @@ -511,7 +511,35 @@ enum status_buffer {
>  };
>  
>  enum error_info_rec {
> -	CMD_ISS_STPD	=  (1U << 31),	/* Cmd Issue Stopped */
> +	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
> +	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
> +	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
> +	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
> +	UNK_FIS		= (1U << 27),	/* unknown FIS */
> +	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
> +	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
> +	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
> +	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
> +	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset *?

there is a question mark instead of a slash in the line above.
also I noted 1U << 22 to 1U << 21 were missing. was that intended?

> +	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
> +	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
> +	DATA_OVER_UNDER	= (1U << 16),	/* data overflow/underflow */
> +	INTERLOCK	= (1U << 15),	/* interlock error */
> +	NAK		= (1U << 14),	/* NAK rx'd */
> +	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
> +	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
> +	OPEN_TO		= (1U << 11),	/* I_T nexus lost, open cxn timeout */
> +	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
> +	NO_DEST		= (1U << 9),	/* I_T nexus lost, no destination */
> +	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
> +	BREAK		= (1U << 7),	/* break received */
> +	BAD_DEST	= (1U << 6),	/* bad destination */
> +	BAD_PROTO	= (1U << 5),	/* protocol not supported */
> +	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
> +	WRONG_DEST	= (1U << 3),	/* wrong destination error */
> +	CREDIT_TO	= (1U << 2),	/* credit timeout */
> +	WDOG_TO		= (1U << 1),	/* watchdog timeout */
> +	BUF_PAR		= (1U << 0),	/* buffer parity error */
>  };
>  
>  struct mvs_chip_info {
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 


  reply	other threads:[~2008-03-05 19:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-05 19:03 [PATCH] mvsas: fill in error info record bits Jeff Garzik
2008-03-05 19:28 ` Roel Kluin [this message]
2008-03-05 19:46   ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47CEF462.8060607@tiscali.nl \
    --to=12o3l@tiscali.nl \
    --cc=jeff@garzik.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox