From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Tony Lindgren <tony@atomide.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 04/18] MMC: OMAP: Remove cover switch handling to allow adding multislot support
Date: Fri, 14 Mar 2008 15:36:13 -0400 [thread overview]
Message-ID: <47DAD3AD.2070203@indt.org.br> (raw)
From: Tony Lindgren <tony@atomide.com>
This patch removes the MMC cover switch handling temporarily
to make following multislot patches cleaner.
MMC cover switch handling will be added back in later patches
after adding basic multislot support.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
---
drivers/mmc/host/omap.c | 152 +----------------------------------------------
1 files changed, 1 insertions(+), 151 deletions(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index e4e54ff..6c43058 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -95,8 +95,6 @@
* when the cover switch is open */
#define OMAP_MMC_SWITCH_POLL_DELAY 500
-static int mmc_omap_enable_poll = 1;
-
struct mmc_omap_host {
int initialized;
int suspended;
@@ -133,62 +131,11 @@ struct mmc_omap_host {
short power_pin;
short wp_pin;
- int switch_pin;
struct work_struct switch_work;
struct timer_list switch_timer;
int switch_last_state;
};
-static inline int
-mmc_omap_cover_is_open(struct mmc_omap_host *host)
-{
- if (host->switch_pin < 0)
- return 0;
- return omap_get_gpio_datain(host->switch_pin);
-}
-
-static ssize_t
-mmc_omap_show_cover_switch(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct mmc_omap_host *host = dev_get_drvdata(dev);
-
- return sprintf(buf, "%s\n", mmc_omap_cover_is_open(host) ? "open" :
- "closed");
-}
-
-static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
-
-static ssize_t
-mmc_omap_show_enable_poll(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", mmc_omap_enable_poll);
-}
-
-static ssize_t
-mmc_omap_store_enable_poll(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t size)
-{
- int enable_poll;
-
- if (sscanf(buf, "%10d", &enable_poll) != 1)
- return -EINVAL;
-
- if (enable_poll != mmc_omap_enable_poll) {
- struct mmc_omap_host *host = dev_get_drvdata(dev);
-
- mmc_omap_enable_poll = enable_poll;
- if (enable_poll && host->switch_pin >= 0)
- schedule_work(&host->switch_work);
- }
- return size;
-}
-
-static DEVICE_ATTR(enable_poll, 0664,
- mmc_omap_show_enable_poll, mmc_omap_store_enable_poll);
-
static void
mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
{
@@ -495,8 +442,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
if (status & OMAP_MMC_STAT_CMD_TOUT) {
/* Timeouts are routine with some commands */
if (host->cmd) {
- if (!mmc_omap_cover_is_open(host))
- dev_err(mmc_dev(host->mmc),
+ dev_err(mmc_dev(host->mmc),
"command timeout, CMD %d\n",
host->cmd->opcode);
host->cmd->error = -ETIMEDOUT;
@@ -544,54 +490,6 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static irqreturn_t mmc_omap_switch_irq(int irq, void *dev_id)
-{
- struct mmc_omap_host *host = (struct mmc_omap_host *) dev_id;
-
- schedule_work(&host->switch_work);
-
- return IRQ_HANDLED;
-}
-
-static void mmc_omap_switch_timer(unsigned long arg)
-{
- struct mmc_omap_host *host = (struct mmc_omap_host *) arg;
-
- schedule_work(&host->switch_work);
-}
-
-static void mmc_omap_switch_handler(struct work_struct *work)
-{
- struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, switch_work);
- struct mmc_card *card;
- static int complained = 0;
- int cards = 0, cover_open;
-
- if (host->switch_pin == -1)
- return;
- cover_open = mmc_omap_cover_is_open(host);
- if (cover_open != host->switch_last_state) {
- kobject_uevent(&host->dev->kobj, KOBJ_CHANGE);
- host->switch_last_state = cover_open;
- }
- mmc_detect_change(host->mmc, 0);
- list_for_each_entry(card, &host->mmc->cards, node) {
- if (mmc_card_present(card))
- cards++;
- }
- if (mmc_omap_cover_is_open(host)) {
- if (!complained) {
- dev_info(mmc_dev(host->mmc), "cover is open\n");
- complained = 1;
- }
- if (mmc_omap_enable_poll)
- mod_timer(&host->switch_timer, jiffies +
- msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY));
- } else {
- complained = 0;
- }
-}
-
/* Prepare to transfer the next segment of a scatterlist */
static void
mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
@@ -1057,7 +955,6 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
* the card detect sensing.
*/
host->power_pin = minfo->power_pin;
- host->switch_pin = minfo->switch_pin;
host->wp_pin = minfo->wp_pin;
host->use_dma = 1;
host->dma_ch = -1;
@@ -1102,48 +999,10 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
host->dev = &pdev->dev;
platform_set_drvdata(pdev, host);
- if (host->switch_pin >= 0) {
- INIT_WORK(&host->switch_work, mmc_omap_switch_handler);
- init_timer(&host->switch_timer);
- host->switch_timer.function = mmc_omap_switch_timer;
- host->switch_timer.data = (unsigned long) host;
- if (omap_request_gpio(host->switch_pin) != 0) {
- dev_warn(mmc_dev(host->mmc), "Unable to get GPIO pin for MMC cover switch\n");
- host->switch_pin = -1;
- goto no_switch;
- }
-
- omap_set_gpio_direction(host->switch_pin, 1);
- ret = request_irq(OMAP_GPIO_IRQ(host->switch_pin),
- mmc_omap_switch_irq, IRQF_TRIGGER_RISING, DRIVER_NAME, host);
- if (ret) {
- dev_warn(mmc_dev(host->mmc), "Unable to get IRQ for MMC cover switch\n");
- omap_free_gpio(host->switch_pin);
- host->switch_pin = -1;
- goto no_switch;
- }
- ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
- if (ret == 0) {
- ret = device_create_file(&pdev->dev, &dev_attr_enable_poll);
- if (ret != 0)
- device_remove_file(&pdev->dev, &dev_attr_cover_switch);
- }
- if (ret) {
- dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
- free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
- omap_free_gpio(host->switch_pin);
- host->switch_pin = -1;
- goto no_switch;
- }
- if (mmc_omap_enable_poll && mmc_omap_cover_is_open(host))
- schedule_work(&host->switch_work);
- }
-
mmc_add_host(mmc);
return 0;
-no_switch:
/* FIXME: Free other resources too. */
if (host) {
if (host->iclk && !IS_ERR(host->iclk))
@@ -1182,15 +1041,6 @@ static int mmc_omap_remove(struct platform_device *pdev)
if (host->power_pin >= 0)
omap_free_gpio(host->power_pin);
- if (host->switch_pin >= 0) {
- device_remove_file(&pdev->dev, &dev_attr_enable_poll);
- device_remove_file(&pdev->dev, &dev_attr_cover_switch);
- free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
- omap_free_gpio(host->switch_pin);
- host->switch_pin = -1;
- del_timer_sync(&host->switch_timer);
- flush_scheduled_work();
- }
if (host->iclk && !IS_ERR(host->iclk))
clk_put(host->iclk);
if (host->fclk && !IS_ERR(host->fclk))
-- 1.5.3.GIT
next reply other threads:[~2008-03-14 19:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-14 19:36 Carlos Aguiar [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-03-14 19:35 [PATCH 00/18] MMC: OMAP: Sync MMC OMAP driver with mainline tree Carlos Aguiar
2008-03-24 12:26 ` Pierre Ossman
2008-03-26 20:08 ` [PATCH 04/18] MMC: OMAP: Remove cover switch handling to allow adding multislot support Carlos Aguiar
2008-01-28 19:07 Carlos Aguiar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47DAD3AD.2070203@indt.org.br \
--to=carlos.aguiar@indt.org.br \
--cc=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox