From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Tony Lindgren <tony@atomide.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 11/18] MMC: OMAP: Abort stuck commands
Date: Fri, 14 Mar 2008 15:36:38 -0400 [thread overview]
Message-ID: <47DAD3C6.5080900@indt.org.br> (raw)
From: Jarkko Lavinen <jarkko.lavinen@nokia.com>
When a card is removed while it is being accessed, a command can get stuck so
that no timeout or end of command interrupt ever occurs. The command getting
stuck is almost always CDM12, but also the other commands can get stuck. Catch
a stuck command with a timer and try sending the initiliazation stream until
the controller starts running again and responds with the end of command
status.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap.c | 93 ++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 83 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index ae0de17..f9cbda3 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -134,6 +134,9 @@ struct mmc_omap_host {
unsigned char bus_mode;
unsigned char hw_bus_mode;
+ struct work_struct cmd_abort;
+ struct timer_list cmd_timer;
+
unsigned int sg_len;
int sg_idx;
u16 * buffer;
@@ -314,6 +317,8 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
if (host->data && !(host->data->flags & MMC_DATA_WRITE))
cmdreg |= 1 << 15;
+ mod_timer(&host->cmd_timer, jiffies + HZ/2);
+
OMAP_MMC_WRITE(host, CTO, 200);
OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
@@ -373,9 +378,37 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
}
static void
+mmc_omap_send_abort(struct mmc_omap_host *host)
+{
+ struct mmc_omap_slot *slot = host->current_slot;
+ unsigned int restarts, passes, timeout;
+ u16 stat = 0;
+
+ /* Sending abort takes 80 clocks. Have some extra and round up */
+ timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
+ restarts = 0;
+ while (restarts < 10000) {
+ OMAP_MMC_WRITE(host, STAT, 0xFFFF);
+ OMAP_MMC_WRITE(host, CMD, (3 << 12) | (1 << 7));
+
+ passes = 0;
+ while (passes < timeout) {
+ stat = OMAP_MMC_READ(host, STAT);
+ if (stat & OMAP_MMC_STAT_END_OF_CMD)
+ goto out;
+ udelay(1);
+ passes++;
+ }
+
+ restarts++;
+ }
+out:
+ OMAP_MMC_WRITE(host, STAT, stat);
+}
+
+static void
mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
{
- int loops;
u16 ie;
if (host->dma_in_use)
@@ -386,16 +419,8 @@ mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
ie = OMAP_MMC_READ(host, IE);
OMAP_MMC_WRITE(host, IE, 0);
- OMAP_MMC_WRITE(host, CMD, 1 << 7);
- loops = 0;
- while (!(OMAP_MMC_READ(host, STAT) & OMAP_MMC_STAT_END_OF_CMD)) {
- udelay(1);
- loops++;
- if (loops == 100000)
- break;
- }
- OMAP_MMC_WRITE(host, STAT, OMAP_MMC_STAT_END_OF_CMD);
OMAP_MMC_WRITE(host, IE, ie);
+ mmc_omap_send_abort(host);
}
static void
@@ -451,6 +476,8 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
{
host->cmd = NULL;
+ del_timer(&host->cmd_timer);
+
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
/* response type 2 */
@@ -486,6 +513,47 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
}
}
+/*
+ * Abort stuck command. Can occur when card is removed while it is being
+ * read.
+ */
+static void mmc_omap_abort_command(struct work_struct *work)
+{
+ struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+ cmd_abort);
+ u16 ie;
+
+ ie = OMAP_MMC_READ(host, IE);
+ OMAP_MMC_WRITE(host, IE, 0);
+
+ if (!host->cmd) {
+ OMAP_MMC_WRITE(host, IE, ie);
+ return;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "Aborting stuck command CMD%d\n",
+ host->cmd->opcode);
+
+ if (host->data && host->dma_in_use)
+ mmc_omap_release_dma(host, host->data, 1);
+
+ host->data = NULL;
+ host->sg_len = 0;
+
+ mmc_omap_send_abort(host);
+ host->cmd->error = -ETIMEDOUT;
+ mmc_omap_cmd_done(host, host->cmd);
+ OMAP_MMC_WRITE(host, IE, ie);
+}
+
+static void
+mmc_omap_cmd_timer(unsigned long data)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+
+ schedule_work(&host->cmd_abort);
+}
+
/* PIO only */
static void
mmc_omap_sg_to_buf(struct mmc_omap_host *host)
@@ -1255,6 +1323,11 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
goto err_free_mem_region;
}
+ INIT_WORK(&host->cmd_abort, mmc_omap_abort_command);
+ init_timer(&host->cmd_timer);
+ host->cmd_timer.function = mmc_omap_cmd_timer;
+ host->cmd_timer.data = (unsigned long) host;
+
spin_lock_init(&host->dma_lock);
init_timer(&host->dma_timer);
spin_lock_init(&host->slot_lock);
-- 1.5.3.GIT
next reply other threads:[~2008-03-14 19:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-14 19:36 Carlos Aguiar [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-03-14 19:35 [PATCH 00/18] MMC: OMAP: Sync MMC OMAP driver with mainline tree Carlos Aguiar
2008-03-24 12:26 ` Pierre Ossman
2008-03-26 20:09 ` [PATCH 11/18] MMC: OMAP: Abort stuck commands Carlos Aguiar
2008-01-28 19:07 Carlos Aguiar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47DAD3C6.5080900@indt.org.br \
--to=carlos.aguiar@indt.org.br \
--cc=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox