From: Andre Tomt <andre@tomt.net>
To: "Rafael J. Wysocki" <rjw@sisk.pl>,
linux-kernel@vger.kernel.org, mranostay@embeddedalley.com
Subject: 2.6.25-git regression with snd-hda-intel on Dell XPS M1330, no analog sound
Date: Fri, 21 Mar 2008 20:03:32 +0100 [thread overview]
Message-ID: <47E40684.2030608@tomt.net> (raw)
[Rafael & Matthew: this is a resend - original was sent to wrong
linux-kernel address. Also updated, so just ignore the earlier emails.]
With 2.6.25-git I lost sound on my Dell XPS M1330 laptop. There seems to
be two issues at hand here: 1. Analog output is listed, but emits no
sound (just silence), and 2. Digital out device is missing.
Issue #1 is bisected in this thread. #2 is still work in progress, and
will be posted as a separate thread.
git bisect nailed down the missing audio issue to this commit:
> 2f32d909f3a85a96074801f6cf20f93324f87646 is first bad commit
> commit 2f32d909f3a85a96074801f6cf20f93324f87646
> Author: Matthew Ranostay <mranostay@embeddedalley.com>
> Date: Thu Jan 10 13:06:26 2008 +0100
>
> [ALSA] hda: STAC9228 VT fixes
>
> Moved 2 systems PCI_QUIRK values to STAC_DELL_BIOS. Also the second
> front HP jack is incorrect defined in the BIOS VT's for some laptops,
> this patch corrects this.
>
> Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
>
> :040000 040000 98d7878c8addc0b1595d4b42524cf9cb6cf8759a e32416d5e02694320e8aac369b260d86b2eb2508 M sound
lspci:
> 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
> Subsystem: Dell Unknown device [1028:0209]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 217
> Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
> Address: 00000000fee0300c Data: 414a
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [130] Root Complex Link <?>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
> 00: 86 80 4b 28 06 05 10 00 02 00 03 04 10 00 00 00
> 10: 04 c0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 09 02
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 01 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 05 70 81 00 0c 30 e0 fe 00 00 00 00 4a 41 00 00
> 70: 10 00 91 00 c0 0f 00 00 00 08 10 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
next reply other threads:[~2008-03-21 19:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-21 19:03 Andre Tomt [this message]
2008-03-21 20:30 ` 2.6.25-git regression with snd-hda-intel on Dell XPS M1330, no analog sound Matthew Ranostay
2008-03-21 21:31 ` Andre Tomt
2008-03-22 16:44 ` Takashi Iwai
2008-03-23 22:49 ` Andre Tomt
-- strict thread matches above, loose matches on Subject: below --
2008-04-03 22:49 2.6.25-rc8-git2: Reported regressions from 2.6.24 Rafael J. Wysocki
2008-04-03 23:22 ` 2.6.25-git regression with snd-hda-intel on Dell XPS M1330, no analog sound Rafael J. Wysocki
2008-04-05 19:49 ` Bill Davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47E40684.2030608@tomt.net \
--to=andre@tomt.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mranostay@embeddedalley.com \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).