From: Tejun Heo <htejun@gmail.com>
To: "Peter F. Patel-Schneider" <pfps@verizon.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-kernel@vger.kernel.org,
"Peter F. Patel-Schneider" <pfps@research.bell-labs.com>
Subject: Re: 2.6.23-rc9-git4: pata_pcmcia, disabling IRQ #9 and Re: libata and legacy ide pcmcia failure
Date: Wed, 26 Mar 2008 23:44:39 +0900 [thread overview]
Message-ID: <47EA6157.6090208@gmail.com> (raw)
In-Reply-To: <47EA5A13.70109@verizon.net>
Peter F. Patel-Schneider wrote:
> Alan Cox wrote:
>> O> Mar 20 19:51:45 idefix kernel: ata12: PATA max PIO0 cmd 0xa100 ctl
>>> 0xa10e irq 3
>>> Mar 20 19:52:15 idefix kernel: ata12.00: qc timeout (cmd 0x91)
>>> Mar 20 19:52:15 idefix kernel: ata12.00: failed to IDENTIFY
>>> (INIT_DEV_PARAMS failed, err_mask=0x4)
>>>
>>
>> Thinkpad T61p .. I've seen a few of these.
>>
>> Firstly try the card and adapter in a different PC and let me know if
>> that works. So far they do. If that is the case get the latest firmware
>> updates (BIOS etc) for your thinkpad and see if the problem goes away.
>> They (or our ACPI code I guess it may be) have some serious IRQ routing
>> problems on this box.
>>
>> Alan
>>
>>
> So I tried again just now (on the same T60p running the current Fedora
> 8), and got different behaviour!
>
> Mar 26 10:06:33 idefix kernel: pccard: PCMCIA card inserted into slot 0
> Mar 26 10:06:33 idefix kernel: cs: memory probe 0xe4300000-0xe7ffffff:
> excluding 0xe4300000-0xe46cffff 0xe4e70000-0xe523ffff
> 0xe5db0000-0xe617ffff 0xe6cf0000-0xe70bffff
> Mar 26 10:06:33 idefix kernel: pcmcia: registering new device pcmcia0.0
> Mar 26 10:06:34 idefix kernel: scsi11 : pata_pcmcia
> Mar 26 10:06:34 idefix kernel: ata7: PATA max PIO0 cmd 0xa100 ctl 0xa10e
> irq 3
> Mar 26 10:06:34 idefix kernel: ata7.00: CFA: SanDisk SDCFH-512,
> FhCA0145, max PIO4
> Mar 26 10:06:34 idefix kernel: ata7.00: 1000944 sectors, multi 0: LBA
> Mar 26 10:06:34 idefix kernel: ata7.00: configured for PIO0
> Mar 26 10:06:34 idefix kernel: isa bounce pool size: 16 pages
> Mar 26 10:06:34 idefix kernel: scsi 11:0:0:0: Direct-Access ATA
> SanDisk SDCFH-51 FhCA PQ: 0 ANSI: 5
> Mar 26 10:06:34 idefix kernel: sd 11:0:0:0: [sdc] 1000944 512-byte
> hardware sectors (512 MB)
> Mar 26 10:06:34 idefix kernel: sd 11:0:0:0: [sdc] Write Protect is off
> Mar 26 10:06:34 idefix kernel: sd 11:0:0:0: [sdc] Write cache: disabled,
> read cache: enabled, doesn't support DPO or FUA
> Mar 26 10:06:34 idefix kernel: sd 11:0:0:0: [sdc] 1000944 512-byte
> hardware sectors (512 MB)
> Mar 26 10:06:34 idefix kernel: sd 11:0:0:0: [sdc] Write Protect is off
> Mar 26 10:06:34 idefix kernel: sd 11:0:0:0: [sdc] Write cache: disabled,
> read cache: enabled, doesn't support DPO or FUA
> Mar 26 10:07:04 idefix kernel: sdc:<3>ata7.00: exception Emask 0x0 SAct
> 0x0 SErr 0x0 action 0x2 frozen
> Mar 26 10:07:04 idefix kernel: ata7.00: cmd
> 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
> Mar 26 10:07:04 idefix kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Mar 26 10:07:04 idefix kernel: ata7.00: status: { DRDY }
> Mar 26 10:07:04 idefix kernel: ata7: soft resetting link
> Mar 26 10:07:04 idefix kernel: ata7.00: configured for PIO0
> Mar 26 10:07:04 idefix kernel: ata7: EH complete
> Mar 26 10:07:34 idefix kernel: ata7.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> Mar 26 10:07:34 idefix kernel: ata7.00: cmd
> 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
> Mar 26 10:07:34 idefix kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Mar 26 10:07:34 idefix kernel: ata7.00: status: { DRDY }
> Mar 26 10:07:34 idefix kernel: ata7: soft resetting link
> Mar 26 10:07:34 idefix kernel: ata7.00: configured for PIO0
> Mar 26 10:07:34 idefix kernel: ata7: EH complete
> Mar 26 10:08:04 idefix kernel: ata7.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> Mar 26 10:08:04 idefix kernel: ata7.00: cmd
> 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
> Mar 26 10:08:04 idefix kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Mar 26 10:08:04 idefix kernel: ata7.00: status: { DRDY }
> Mar 26 10:08:04 idefix kernel: ata7: soft resetting link
> Mar 26 10:08:04 idefix kernel: ata7.00: configured for PIO0
> Mar 26 10:08:04 idefix kernel: ata7: EH complete
>
> Any ideas on where this "report" should go?
Does irqpoll help?
--
tejun
next prev parent reply other threads:[~2008-03-26 14:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-05 18:08 2.6.23-rc9-git4: pata_pcmcia, disabling IRQ #9 Manuel Lauss
2008-03-21 0:26 ` 2.6.23-rc9-git4: pata_pcmcia, disabling IRQ #9 and Re: libata and legacy ide pcmcia failure Peter F. Patel-Schneider
2008-03-21 1:12 ` Alan Cox
2008-03-21 1:38 ` Tejun Heo
2008-03-21 10:40 ` Alan Cox
2008-03-21 11:17 ` Peter F. Patel-Schneider
2008-03-21 11:13 ` Alan Cox
2008-03-21 11:29 ` Peter F. Patel-Schneider
2008-03-21 12:51 ` Reporting ThinkPad BIOS bugs Henrique de Moraes Holschuh
2008-03-21 13:40 ` Peter F. Patel-Schneider
2008-03-21 11:31 ` 2.6.23-rc9-git4: pata_pcmcia, disabling IRQ #9 and Re: libata and legacy ide pcmcia failure Peter F. Patel-Schneider
2008-03-21 11:27 ` Alan Cox
2008-03-21 2:23 ` Peter F. Patel-Schneider
2008-03-21 10:41 ` Alan Cox
2008-03-26 14:13 ` Peter F. Patel-Schneider
2008-03-26 14:44 ` Tejun Heo [this message]
2008-03-26 15:28 ` Peter F. Patel-Schneider
2008-03-29 4:40 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47EA6157.6090208@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=pfps@research.bell-labs.com \
--cc=pfps@verizon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox