From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: ext Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Tony Lindgren <tony@atomide.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 11/18] MMC: OMAP: Abort stuck commands
Date: Wed, 26 Mar 2008 16:09:29 -0400 [thread overview]
Message-ID: <47EAAD79.7060607@indt.org.br> (raw)
In-Reply-To: <20080324132631.1e0d2125@mjolnir.drzeus.cx>
From: Jarkko Lavinen <jarkko.lavinen@nokia.com>
When a card is removed while it is being accessed, a command can get stuck so
that no timeout or end of command interrupt ever occurs. The command getting
stuck is almost always CDM12, but also the other commands can get stuck. Catch
a stuck command with a timer and try sending the initialization stream until
the controller starts running again and responds with the end of command
status.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap.c | 93 ++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 83 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 7858902..0646912 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -134,6 +134,9 @@ struct mmc_omap_host {
unsigned char bus_mode;
unsigned char hw_bus_mode;
+ struct work_struct cmd_abort;
+ struct timer_list cmd_timer;
+
unsigned int sg_len;
int sg_idx;
u16 * buffer;
@@ -314,6 +317,8 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
if (host->data && !(host->data->flags & MMC_DATA_WRITE))
cmdreg |= 1 << 15;
+ mod_timer(&host->cmd_timer, jiffies + HZ/2);
+
OMAP_MMC_WRITE(host, CTO, 200);
OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
@@ -373,9 +378,37 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
}
static void
+mmc_omap_send_abort(struct mmc_omap_host *host)
+{
+ struct mmc_omap_slot *slot = host->current_slot;
+ unsigned int restarts, passes, timeout;
+ u16 stat = 0;
+
+ /* Sending abort takes 80 clocks. Have some extra and round up */
+ timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
+ restarts = 0;
+ while (restarts < 10000) {
+ OMAP_MMC_WRITE(host, STAT, 0xFFFF);
+ OMAP_MMC_WRITE(host, CMD, (3 << 12) | (1 << 7));
+
+ passes = 0;
+ while (passes < timeout) {
+ stat = OMAP_MMC_READ(host, STAT);
+ if (stat & OMAP_MMC_STAT_END_OF_CMD)
+ goto out;
+ udelay(1);
+ passes++;
+ }
+
+ restarts++;
+ }
+out:
+ OMAP_MMC_WRITE(host, STAT, stat);
+}
+
+static void
mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
{
- int loops;
u16 ie;
if (host->dma_in_use)
@@ -386,16 +419,8 @@ mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
ie = OMAP_MMC_READ(host, IE);
OMAP_MMC_WRITE(host, IE, 0);
- OMAP_MMC_WRITE(host, CMD, 1 << 7);
- loops = 0;
- while (!(OMAP_MMC_READ(host, STAT) & OMAP_MMC_STAT_END_OF_CMD)) {
- udelay(1);
- loops++;
- if (loops == 100000)
- break;
- }
- OMAP_MMC_WRITE(host, STAT, OMAP_MMC_STAT_END_OF_CMD);
OMAP_MMC_WRITE(host, IE, ie);
+ mmc_omap_send_abort(host);
}
static void
@@ -451,6 +476,8 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
{
host->cmd = NULL;
+ del_timer(&host->cmd_timer);
+
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
/* response type 2 */
@@ -486,6 +513,47 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
}
}
+/*
+ * Abort stuck command. Can occur when card is removed while it is being
+ * read.
+ */
+static void mmc_omap_abort_command(struct work_struct *work)
+{
+ struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+ cmd_abort);
+ u16 ie;
+
+ ie = OMAP_MMC_READ(host, IE);
+ OMAP_MMC_WRITE(host, IE, 0);
+
+ if (!host->cmd) {
+ OMAP_MMC_WRITE(host, IE, ie);
+ return;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "Aborting stuck command CMD%d\n",
+ host->cmd->opcode);
+
+ if (host->data && host->dma_in_use)
+ mmc_omap_release_dma(host, host->data, 1);
+
+ host->data = NULL;
+ host->sg_len = 0;
+
+ mmc_omap_send_abort(host);
+ host->cmd->error = -ETIMEDOUT;
+ mmc_omap_cmd_done(host, host->cmd);
+ OMAP_MMC_WRITE(host, IE, ie);
+}
+
+static void
+mmc_omap_cmd_timer(unsigned long data)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+
+ schedule_work(&host->cmd_abort);
+}
+
/* PIO only */
static void
mmc_omap_sg_to_buf(struct mmc_omap_host *host)
@@ -1233,6 +1301,11 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
goto err_free_mem_region;
}
+ INIT_WORK(&host->cmd_abort, mmc_omap_abort_command);
+ init_timer(&host->cmd_timer);
+ host->cmd_timer.function = mmc_omap_cmd_timer;
+ host->cmd_timer.data = (unsigned long) host;
+
spin_lock_init(&host->dma_lock);
init_timer(&host->dma_timer);
spin_lock_init(&host->slot_lock);
-- 1.5.3.GIT
next prev parent reply other threads:[~2008-03-26 20:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-14 19:35 [PATCH 00/18] MMC: OMAP: Sync MMC OMAP driver with mainline tree Carlos Aguiar
2008-03-24 12:26 ` Pierre Ossman
2008-03-26 20:08 ` Carlos Aguiar
2008-03-30 16:10 ` Pierre Ossman
2008-03-26 20:08 ` [PATCH 01/18] MMC: OMAP: Remove some opcodes from host driver Carlos Aguiar
2008-03-26 20:08 ` [PATCH 02/18] MMC: OMAP: Remove extra divisor increase Carlos Aguiar
2008-03-26 20:08 ` [PATCH 03/18] MMC: OMAP: Fix the BYTEBLOCK capability removal Carlos Aguiar
2008-03-26 20:08 ` [PATCH 04/18] MMC: OMAP: Remove cover switch handling to allow adding multislot support Carlos Aguiar
2008-03-26 20:08 ` [PATCH 05/18] MMC: OMAP: Introduce new multislot structure and change driver to use it Carlos Aguiar
2008-03-26 20:09 ` [PATCH 06/18] MMC: OMAP: Add back cover switch support Carlos Aguiar
2008-03-26 20:09 ` [PATCH 07/18] MMC: OMAP: New release dma and abort xfer functions Carlos Aguiar
2008-03-26 20:09 ` [PATCH 08/18] MMC: OMAP: Fix timeout calculation for MMC multislot support Carlos Aguiar
2008-03-26 20:09 ` [PATCH 09/18] MMC: OMAP: Power functions modified to " Carlos Aguiar
2008-03-26 20:09 ` [PATCH 10/18] MMC: OMAP: General cleanup for " Carlos Aguiar
2008-03-26 20:09 ` Carlos Aguiar [this message]
2008-03-26 20:09 ` [PATCH 12/18] MMC: OMAP: Using setup_timer instead of init_timer Carlos Aguiar
2008-03-26 20:09 ` [PATCH 13/18] MMC: OMAP: Check the get_cover_state function pointer if not set Carlos Aguiar
2008-03-26 20:09 ` [PATCH 14/18] MMC: OMAP: Use tasklet instead of workqueue for cover switch notification Carlos Aguiar
2008-03-26 20:09 ` [PATCH 15/18] MMC: OMAP: Move failing command abortion to workqueue Carlos Aguiar
2008-03-26 20:09 ` [PATCH 16/18] MMC: OMAP: Lazy clock shutdown Carlos Aguiar
2008-03-26 20:09 ` [PATCH 17/18] MMC: OMAP: Start new commands from work queue instead of irq Carlos Aguiar
2008-03-26 20:10 ` [PATCH 18/18] MMC: OMAP: Do not busy wait for end of command for ever Carlos Aguiar
-- strict thread matches above, loose matches on Subject: below --
2008-03-14 19:36 [PATCH 11/18] MMC: OMAP: Abort stuck commands Carlos Aguiar
2008-01-28 19:07 Carlos Aguiar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47EAAD79.7060607@indt.org.br \
--to=carlos.aguiar@indt.org.br \
--cc=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox