[PATCH 1/2] Blackfin EMAC driver: finish removing remnants of old BF537_PORT_H option

Bryan Wu
2008-03-26T10:22:48Z

From: Mike Frysinger <vapier.adi@gmail.com>

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
arch/blackfin/mach-bf537/head.S | 12 ------------
drivers/net/Kconfig | 2 +-
2 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 3014fe8..ac85fdf 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -180,18 +180,6 @@ ENTRY(__start)
SSYNC;
#endif

-#ifdef CONFIG_BF537_PORT_H
- p0.h = hi(PORTH_FER);
- p0.l = lo(PORTH_FER);
- R0.L = W[P0]; /* Read */
- SSYNC;
- R0 = 0x0000;
- W[P0] = R0.L; /* Write */
- SSYNC;
- W[P0] = R0.L; /* Disable peripheral function of PORTH */
- SSYNC;
-#endif
-
/* Initialise UART - when booting from u-boot, the UART is not disabled
* so if we dont initalize here, our serial console gets hosed */
p0.h = hi(UART_LCR);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fe7b5ec..c52e9d8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -820,7 +820,7 @@ config ULTRA32

config BFIN_MAC
tristate "Blackfin 527/536/537 on-chip mac support"
- depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H)
+ depends on NET_ETHERNET && (BF527 || BF537 || BF536)
select CRC32
select MII
select PHYLIB
--
1.5.4.3