public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Rich West <Rich.West@wesmo.com>
To: linux-kernel@vger.kernel.org
Subject: sata_via
Date: Fri, 04 Apr 2008 16:51:20 -0400	[thread overview]
Message-ID: <47F694C8.8020507@wesmo.com> (raw)

On my mythtv backend system, the recordings volume tends to get pounded
rather hard (up to 5 recordings (some HD) at once with multiple frontend
systems reading from that same volume).  I recently (4 months ago)
upgraded the system to a motherboard that happened to have the VIA
chipset on it.

Since that time, I have had some bizarre problems with that volume. 
After a seemingly random amount of time, the kernel would report an
error with the volume and put it in read-only mode.  However, it would
not really be in read-only mode, but it would be completely
inaccessible.  Unmounting the volume would be successful, but
re-mounting the volume would fail.

I've replaced the drive (with an identical one), tested memory, changed
filesystems (it was LVM + ext3, then just ext3) and the problem persists.

Running 2.6.24.4-64 (Fedora 8).

A larger snippet from the messages log is (dmesg gets cleared after reboot):
Apr  3 16:47:27 mythtv1 kernel: ata4.00: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x2 frozen
Apr  3 16:47:27 mythtv1 kernel: ata4.00: cmd
c8/00:00:77:31:21/00:00:00:00:00/e1 tag 0 dma 131072 in
Apr  3 16:47:27 mythtv1 kernel:          res
40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Apr  3 16:47:27 mythtv1 kernel: ata4.00: status: { DRDY }
Apr  3 16:47:27 mythtv1 kernel: ata4: soft resetting link
Apr  3 16:47:57 mythtv1 kernel: ata4.00: qc timeout (cmd 0x27)
Apr  3 16:47:57 mythtv1 kernel: ata4.00: failed to read native max
address (err_mask=0x4)
Apr  3 16:47:57 mythtv1 kernel: ata4.00: HPA support seems broken, will
skip HPA handling
Apr  3 16:47:57 mythtv1 kernel: ata4.00: revalidation failed (errno=-5)
Apr  3 16:47:57 mythtv1 kernel: ata4: failed to recover some devices,
retrying in 5 secs
Apr  3 16:48:02 mythtv1 kernel: ata4: soft resetting link
Apr  3 16:48:02 mythtv1 kernel: ata4.00: configured for UDMA/133
Apr  3 16:48:02 mythtv1 kernel: ata4: EH complete
Apr  3 16:49:02 mythtv1 kernel: ata4.00: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x2 frozen
Apr  3 16:49:02 mythtv1 kernel: ata4.00: cmd
c8/00:00:77:31:21/00:00:00:00:00/e1 tag 0 dma 131072 in
Apr  3 16:49:02 mythtv1 kernel:          res
40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Apr  3 16:49:02 mythtv1 kernel: ata4.00: status: { DRDY }
Apr  3 16:49:02 mythtv1 kernel: ata4: soft resetting link
Apr  3 16:49:03 mythtv1 kernel: ata4.00: configured for UDMA/133
Apr  3 16:49:03 mythtv1 kernel: ata4: EH complete

It is almost as if I am hitting some bug that is causing the drive to
fall off, but I really don't know where else to look or where else to
turn...

I'm tempted to just go back to using a PATA drive (smaller.  :(  ) to
avoid the problem.  I'm just at a loss as to how it can actually be solved.

-Rich



             reply	other threads:[~2008-04-04 21:00 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-04 20:51 Rich West [this message]
2008-04-04 22:04 ` sata_via Jeff Garzik
2008-04-04 23:44   ` sata_via Rich West
2008-04-05  7:15     ` sata_via Wander Winkelhorst
     [not found]       ` <47F7982E.5080701@wesmo.com>
2008-04-05 21:51         ` sata_via Jeff Garzik
2008-04-13  2:45           ` sata_via Tejun Heo
2008-04-13  4:19             ` sata_via Rich West
2008-04-13  4:36               ` sata_via Rich West
2008-04-14  0:39                 ` sata_via Tejun Heo
2008-04-14  8:13                   ` sata_via Thomas Renninger
2008-04-14  8:32                     ` sata_via Peter Gervai
2008-04-15  2:40                     ` sata_via Tejun Heo
  -- strict thread matches above, loose matches on Subject: below --
2008-04-05 16:08 sata_via Marin Mitov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47F694C8.8020507@wesmo.com \
    --to=rich.west@wesmo.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox