From: Gabriel C <nix.or.die@googlemail.com>
To: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Mika Fischer <mika.fischer@zoopnet.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] x86: mtrr cleanup for converting continuous to discrete layout v7
Date: Wed, 30 Apr 2008 01:56:32 +0200 [thread overview]
Message-ID: <4817B5B0.5090606@googlemail.com> (raw)
In-Reply-To: <86802c440804291449y50f178a6x4e200c26840493a@mail.gmail.com>
Yinghai Lu wrote:
> On Tue, Apr 29, 2008 at 1:25 PM, Gabriel C <nix.or.die@googlemail.com> wrote:
>> Yinghai Lu wrote:
>> > On Tue, Apr 29, 2008 at 4:51 AM, Gabriel C <nix.or.die@googlemail.com> wrote:
>> >> Yinghai Lu wrote:
>> >> > On Tue, Apr 29, 2008 at 3:30 AM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
>> >> >> On Tue, Apr 29, 2008 at 2:47 AM, Gabriel C <nix.or.die@googlemail.com> wrote:
>> >> >> > Yinghai Lu wrote:
>> >> >> > > some BIOS like to use continus MTRR layout, and may X driver can not add
>> >> >> > > WB entries for graphical cards when 4g or more RAM installed.
>> >> >> > >
>> >> >> > > the patch will change MTRR to discrete.
>> >> >> > >
>> >> >> > > mtrr_chunk_size= could be used to have smaller continuous block to hold holes.
>> >> >> > > default is 256m, could be set according to size of graphics card memory.
>> >> >> > >
>> >> >> > > v2: fix -1 for UC checking
>> >> >> > > v3: default to disable, and need use enable_mtrr_cleanup to enable this feature
>> >> >> > > skip the var state change warning.
>> >> >> > > remove next_basek in range_to_mtrr()
>> >> >> > > v4: correct warning mask.
>> >> >> > > v5: CONFIG_MTRR_SANITIZER
>> >> >> > > v6: fix 1g, 2g, 512 aligment with extra hole
>> >> >> > > v7: gran_sizek to prevent running out of MTRRs.
>> >> >> > >
>> >> >> >
>> >> >> > With this version ( and patch http://lkml.org/lkml/2008/4/29/97 ) applyed on latest linus git tree
>> >> >> > the box OOPS'es early.
>> >> >> >
>> >> >> > Sorry I don't have time right now to write down the part of the OOPS I can see on monitor , I can try to find
>> >> >> > some time later.
>> >> >> >
>> >> >> > In any way OOPS'es on __free_one_page+0x191/0x21e
>> >> >>
>> >> >> thanks. found one problem with hole_basek ...
>> >> >>
>> >> >> will send you v8, and hope it will be last version.
>> >> >
>> >> > please try v8, it should get rid of the 8m entry. it need patch
>> >> > http://lkml.org/lkml/2008/4/29/97 too.
>> >>
>> >> Box does boot with v8 but now I get that warning you fixed in v2 again =):
>> >>
>> >> ....
>> >> [ 0.000000] Linux version 2.6.25-06058-ga01e035-dirty (crazy@thor) (gcc version 4.3.0 (Frugalware Linux) ) #805 SMP PREEMPT Tue Apr 29 13:04:49 CEST 2008
>> >> [ 0.000000] Command line: root=/dev/sdb1 ro debug vga=0x317
>> >> [ 0.000000] BIOS-provided physical RAM map:
>> >> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
>> >> [ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
>> >> [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> >> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf550000 (usable)
>> >> [ 0.000000] BIOS-e820: 00000000cf550000 - 00000000cf55e000 (ACPI data)
>> >> [ 0.000000] BIOS-e820: 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
>> >> [ 0.000000] BIOS-e820: 00000000cf5e0000 - 00000000cf600000 (reserved)
>> >> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> >> [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
>> >> [ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
>> >> [ 0.000000] Entering add_active_range(0, 0, 156) 0 entries of 256 used
>> >> [ 0.000000] Entering add_active_range(0, 256, 849232) 1 entries of 256 used
>> >> [ 0.000000] Entering add_active_range(0, 1048576, 1228800) 2 entries of 256 used
>> >> [ 0.000000] max_pfn_mapped = 1228800
>> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> >> [ 0.000000] After WB checking
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 000000000012c000
>> >> [ 0.000000] After UC checking
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> >> [ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
>> >> [ 0.000000] After sorting
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
>> >> [ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> >> [ 0.000000] range0: 0000000000000000 - 00000000c0000000
>> >> [ 0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
>> >> [ 0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
>> >> [ 0.000000] range: 00000000c0000000 - 00000000d0000000
>> >> [ 0.000000] Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
>> >> [ 0.000000] hole: 00000000cc000000 - 00000000d0000000
>> >> [ 0.000000] Setting variable MTRR 3, base: 3264MB, range: 64MB, type UC
>> >> [ 0.000000] rangeX: 00000000d0000000 - 00000000d0000000
>> >> [ 0.000000] range0: 0000000100000000 - 0000000120000000
>> >> [ 0.000000] Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
>> >> [ 0.000000] range: 0000000120000000 - 0000000130000000
>> >> [ 0.000000] Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB
>> >> [ 0.000000] hole: 000000012c000000 - 0000000130000000
>> >> [ 0.000000] Setting variable MTRR 6, base: 4800MB, range: 64MB, type UC
>> >> [ 0.000000] DONE variable MTRRs
>> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>> >> [ 0.000000] After WB checking
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000d0000
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 0000000000130000
>> >> [ 0.000000] After UC checking
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cc000
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> >> [ 0.000000] After sorting
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cc000
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> >> [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 757MB of RAM.
>> >
>> > so
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
>> >> [ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> > ===>
>> >> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cc000
>> >> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> >
>> > please try
>>
>> Now I have 2 warnings
>>
>>
>> > mtrr_chunk_size=512m mtrr_gran_size=128m
>>
>> ...
>>
>> [ 0.000000] Command line: root=/dev/sdb1 ro debug vga=0x317 mtrr_chunk_size=512m mtrr_gran_size=128m 3
>>
>>
>> [ 0.000000] BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
>> [ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf550000 (usable)
>> [ 0.000000] BIOS-e820: 00000000cf550000 - 00000000cf55e000 (ACPI data)
>> [ 0.000000] BIOS-e820: 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
>> [ 0.000000] BIOS-e820: 00000000cf5e0000 - 00000000cf600000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
>> [ 0.000000] Entering add_active_range(0, 0, 156) 0 entries of 256 used
>> [ 0.000000] Entering add_active_range(0, 256, 849232) 1 entries of 256 used
>> [ 0.000000] Entering add_active_range(0, 1048576, 1228800) 2 entries of 256 used
>> [ 0.000000] max_pfn_mapped = 1228800
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> [ 0.000000] After WB checking
>> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 000000000012c000
>> [ 0.000000] After UC checking
>> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
>> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> [ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
>> [ 0.000000] After sorting
>> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
>> [ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
>> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
>> [ 0.000000] range0: 0000000000000000 - 00000000c0000000
>> [ 0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
>> [ 0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
>> [ 0.000000] range: 00000000c0000000 - 00000000c8000000
>> [ 0.000000] Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB
>>
>> [ 0.000000] rangeX: 00000000d0000000 - 00000000d0000000
>> [ 0.000000] range0: 0000000100000000 - 0000000120000000
>> [ 0.000000] Setting variable MTRR 3, base: 4096MB, range: 512MB, type WB
>> [ 0.000000] range: 0000000120000000 - 0000000128000000
>> [ 0.000000] Setting variable MTRR 4, base: 4608MB, range: 128MB, type WB
>>
>> [ 0.000000] DONE variable MTRRs
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>> [ 0.000000] After WB checking
>> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000c8000
>> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 0000000000128000
>>
>> [ 0.000000] After UC checking
>> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000c8000
>> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 0000000000128000
>> [ 0.000000] After sorting
>> [ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000c8000
>> [ 0.000000] MTRR MAP PFN: 0000000000100000 - 0000000000128000
>> [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 64MB of RAM.
>> [ 0.000000] ------------[ cut here ]------------
>> [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1206 mtrr_trim_uncached_memory+0x25b/0x35a()
>>
>> [ 0.000000] Modules linked in:
>> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.25-06058-ga01e035-dirty #805
>> [ 0.000000]
>> [ 0.000000] Call Trace:
>> [ 0.000000] [<ffffffff8022d661>] warn_on_slowpath+0x51/0x78
>> [ 0.000000] [<ffffffff8067f0dc>] x86_get_mtrr_mem_range+0x241/0x25c
>> [ 0.000000] [<ffffffff8067d93e>] update_memory_range+0x95/0xb7
>> [ 0.000000] [<ffffffff8067fa51>] mtrr_trim_uncached_memory+0x25b/0x35a
>>
>> [ 0.000000] [<ffffffff8067ca43>] setup_arch+0x280/0x4a2
>> [ 0.000000] [<ffffffff80676aa6>] start_kernel+0x6e/0x308
>> [ 0.000000] [<ffffffff80676432>] x86_64_start_kernel+0x241/0x24a
>> [ 0.000000]
>> [ 0.000000] ---[ end trace ca143223eefdc828 ]---
>> [ 0.000000] update e820 for mtrr -- end_pfn
>> [ 0.000000] modified physical RAM map:
>> [ 0.000000] modified: 0000000000000000 - 000000000009cc00 (usable)
>> [ 0.000000] modified: 000000000009cc00 - 00000000000a0000 (reserved)
>> [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
>> [ 0.000000] modified: 0000000000100000 - 00000000cf550000 (usable)
>> [ 0.000000] modified: 00000000cf550000 - 00000000cf55e000 (ACPI data)
>> [ 0.000000] modified: 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
>> [ 0.000000] modified: 00000000cf5e0000 - 00000000cf600000 (reserved)
>> [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
>> [ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
>> [ 0.000000] modified: 0000000100000000 - 0000000128000000 (usable)
>> [ 0.000000] modified: 0000000128000000 - 000000012c000000 (reserved)
>>
>> [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 757MB of RAM.
>>
>> [ 0.000000] ------------[ cut here ]------------
>> [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1227 mtrr_trim_uncached_memory+0x30c/0x35a()
>> [ 0.000000] Modules linked in:
>> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.25-06058-ga01e035-dirty #805
>> [ 0.000000]
>> [ 0.000000] Call Trace:
>> [ 0.000000] [<ffffffff8022d661>] warn_on_slowpath+0x51/0x78
>> [ 0.000000] [<ffffffff8067f0dc>] x86_get_mtrr_mem_range+0x241/0x25c
>> [ 0.000000] [<ffffffff8067d93e>] update_memory_range+0x95/0xb7
>> [ 0.000000] [<ffffffff8067fb02>] mtrr_trim_uncached_memory+0x30c/0x35a
>> [ 0.000000] [<ffffffff8067ca43>] setup_arch+0x280/0x4a2
>> [ 0.000000] [<ffffffff80676aa6>] start_kernel+0x6e/0x308
>> [ 0.000000] [<ffffffff80676432>] x86_64_start_kernel+0x241/0x24a
>> [ 0.000000]
>> [ 0.000000] ---[ end trace ca143223eefdc828 ]---
>> [ 0.000000] update e820 for mtrr -- holes
>> [ 0.000000] modified physical RAM map:
>> [ 0.000000] modified: 0000000000000000 - 000000000009cc00 (usable)
>> [ 0.000000] modified: 000000000009cc00 - 00000000000a0000 (reserved)
>> [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
>> [ 0.000000] modified: 0000000000100000 - 00000000c8000000 (usable)
>> [ 0.000000] modified: 00000000c8000000 - 00000000cf550000 (reserved)
>> [ 0.000000] modified: 00000000cf550000 - 00000000cf55e000 (ACPI data)
>> [ 0.000000] modified: 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
>> [ 0.000000] modified: 00000000cf5e0000 - 00000000cf600000 (reserved)
>> [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
>> [ 0.000000] modified: 00000000ffc00000 - 000000012c000000 (reserved)
>>
>> [ 0.000000] Entering add_active_range(0, 0, 156) 3 entries of 256 used
>> [ 0.000000] Entering add_active_range(0, 256, 819200) 3 entries of 256 used
>
> please try attached trim_holes_fix.patch..., it will fix the trim hole problem.
Tested but warning is still there. I try to boot with mtrr_chunk_size / mtrr_gran_size and see what I get.
...
[ 0.000000] Linux version 2.6.25-06589-gc65a350-dirty (crazy@thor) (gcc version 4.3.0 (Frugalware Linux) ) #808 SMP PREEMPT Wed Apr 30 01:37:38 CEST 2008
[ 0.000000] Command line: root=/dev/sdb1 ro debug vga=0x317
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf550000 (usable)
[ 0.000000] BIOS-e820: 00000000cf550000 - 00000000cf55e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf5e0000 - 00000000cf600000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 156) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 849232) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1228800) 2 entries of 256 used
[ 0.000000] max_pfn_mapped = 1228800
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] After WB checking
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 000000000012c000
[ 0.000000] After UC checking
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
[ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
[ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
[ 0.000000] After sorting
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cf600
[ 0.000000] MTRR MAP PFN: 00000000000cf800 - 00000000000d0000
[ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
[ 0.000000] range0: 0000000000000000 - 00000000c0000000
[ 0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
[ 0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
[ 0.000000] range: 00000000c0000000 - 00000000d0000000
[ 0.000000] Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
[ 0.000000] hole: 00000000cc000000 - 00000000d0000000
[ 0.000000] Setting variable MTRR 3, base: 3264MB, range: 64MB, type UC
[ 0.000000] rangeX: 00000000d0000000 - 00000000d0000000
[ 0.000000] range0: 0000000100000000 - 0000000120000000
[ 0.000000] Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
[ 0.000000] range: 0000000120000000 - 0000000130000000
[ 0.000000] Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB
[ 0.000000] hole: 000000012c000000 - 0000000130000000
[ 0.000000] Setting variable MTRR 6, base: 4800MB, range: 64MB, type UC
[ 0.000000] DONE variable MTRRs
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] After WB checking
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000d0000
[ 0.000000] MTRR MAP PFN: 0000000000100000 - 0000000000130000
[ 0.000000] After UC checking
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cc000
[ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
[ 0.000000] After sorting
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 00000000000cc000
[ 0.000000] MTRR MAP PFN: 0000000000100000 - 000000000012c000
[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 757MB of RAM.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1227 mtrr_trim_uncached_memory+0x313/0x361()
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.25-06589-gc65a350-dirty #808
[ 0.000000]
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8022d699>] warn_on_slowpath+0x51/0x8c
[ 0.000000] [<ffffffff806810b4>] x86_get_mtrr_mem_range+0x241/0x25c
[ 0.000000] [<ffffffff8067f915>] update_memory_range+0x95/0xb7
[ 0.000000] [<ffffffff80681ae1>] mtrr_trim_uncached_memory+0x313/0x361
[ 0.000000] [<ffffffff8067ea16>] setup_arch+0x280/0x4a6
[ 0.000000] [<ffffffff80678a3d>] start_kernel+0x6e/0x30d
[ 0.000000] [<ffffffff80678432>] x86_64_start_kernel+0x241/0x24a
[ 0.000000]
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] update e820 for mtrr -- holes
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] modified: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cc000000 (usable)
[ 0.000000] modified: 00000000cc000000 - 00000000cf550000 (reserved)
[ 0.000000] modified: 00000000cf550000 - 00000000cf55e000 (ACPI data)
[ 0.000000] modified: 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
[ 0.000000] modified: 00000000cf5e0000 - 00000000cf600000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 000000012c000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 156) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 835584) 3 entries of 256 used
[ 0.000000] max_pfn_mapped = 1228800
[ 0.000000] init_memory_mapping
...
>
> then check if X server works well.
X seems to work fine even with that warning ..
>
> then try mtrr_cleanup_fix.patch for... ==> address ingo request about style etc.
I will try this one after some reboots.
>
> Thanks
>
> Yinghai Lu
>
Gabriel
next prev parent reply other threads:[~2008-04-29 23:56 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-28 6:37 [PATCH] x86: mtrr cleanup for converting continuous to discrete layout Yinghai Lu
2008-04-28 9:06 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v2 Yinghai Lu
2008-04-28 13:08 ` Ingo Molnar
2008-04-28 13:49 ` Arjan van de Ven
2008-04-28 15:28 ` Mika Fischer
2008-04-28 5:50 ` Arjan van de Ven
2008-04-28 16:01 ` Gabriel C
2008-04-28 16:28 ` Mika Fischer
2008-04-28 19:44 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v3 Yinghai Lu
2008-04-28 20:15 ` Ingo Molnar
2008-04-28 20:18 ` Yinghai Lu
2008-04-28 20:29 ` Ingo Molnar
2008-04-28 20:16 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v4 Yinghai Lu
2008-04-28 22:05 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v5 Yinghai Lu
2008-04-28 22:36 ` Randy Dunlap
2008-04-28 22:47 ` Yinghai Lu
2008-04-29 2:42 ` Andrew Morton
2008-04-29 3:01 ` Yinghai Lu
[not found] ` <200804290157.30651.yhlu.kernel@gmail.com>
2008-04-29 8:59 ` [PATCH 2/2] x86: fix trimming e820 with MTRR holes Yinghai Lu
2008-04-29 11:35 ` Ingo Molnar
2008-04-29 17:18 ` Yinghai Lu
2008-04-29 17:20 ` Yinghai Lu
2008-04-30 3:25 ` [PATCH] x86: fix trimming e820 with MTRR holes. - fix Yinghai Lu
2008-04-30 12:09 ` Ingo Molnar
2008-04-29 9:00 ` [PATCH 1/2] x86: mtrr cleanup for converting continuous to discrete layout v7 Yinghai Lu
2008-04-29 9:47 ` Gabriel C
2008-04-29 10:30 ` Yinghai Lu
2008-04-29 10:56 ` Yinghai Lu
2008-04-29 11:26 ` Ingo Molnar
2008-04-29 11:51 ` Gabriel C
2008-04-29 17:11 ` Yinghai Lu
2008-04-29 20:25 ` Gabriel C
2008-04-29 21:49 ` Yinghai Lu
2008-04-29 23:56 ` Gabriel C [this message]
2008-04-30 0:06 ` Gabriel C
2008-04-30 0:38 ` Yinghai Lu
2008-04-30 1:02 ` Gabriel C
2008-04-30 3:00 ` Yinghai Lu
2008-04-30 3:29 ` Yinghai Lu
2008-04-30 4:12 ` Gabriel C
2008-04-30 4:25 ` Yinghai Lu
2008-04-30 12:04 ` Gabriel C
2008-04-30 16:26 ` Yinghai Lu
2008-04-30 0:13 ` Yinghai Lu
2008-04-29 10:52 ` [PATCH 1/2] x86: mtrr cleanup for converting continuous to discrete layout v8 Yinghai Lu
2008-04-29 13:07 ` Ingo Molnar
2008-04-29 17:25 ` Yinghai Lu
2008-04-29 20:46 ` Randy Dunlap
2008-04-29 21:54 ` Yinghai Lu
2008-04-30 3:25 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v8 - fix Yinghai Lu
2008-04-30 12:09 ` Ingo Molnar
2008-05-01 8:00 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete - auto detect Yinghai Lu
2008-05-01 11:45 ` Gabriel C
2008-05-02 0:06 ` Yinghai Lu
2008-05-02 0:29 ` Gabriel C
2008-05-02 0:35 ` Yinghai Lu
2008-05-02 1:18 ` Gabriel C
2008-05-02 1:55 ` Yinghai Lu
2008-05-01 12:09 ` Mika Fischer
2008-05-01 16:35 ` Yinghai Lu
2008-05-01 16:59 ` Mika Fischer
2008-05-01 17:40 ` Yinghai Lu
2008-05-01 15:09 ` Randy Dunlap
2008-05-01 16:38 ` Yinghai Lu
2008-05-01 18:57 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete - auto detect v2 Yinghai Lu
2008-05-01 19:42 ` H. Peter Anvin
2008-05-01 21:02 ` Yinghai Lu
2008-05-01 21:10 ` H. Peter Anvin
2008-05-01 21:20 ` Yinghai Lu
2008-05-01 21:26 ` H. Peter Anvin
2008-05-01 21:31 ` Yinghai Lu
2008-05-01 21:33 ` H. Peter Anvin
2008-05-01 21:44 ` Yinghai Lu
2008-05-01 21:49 ` H. Peter Anvin
2008-05-01 22:52 ` Yinghai Lu
2008-05-01 22:57 ` H. Peter Anvin
2008-05-01 23:10 ` Yinghai Lu
2008-05-02 0:52 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete - auto detect v3 Yinghai Lu
2008-05-02 9:40 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete - auto detect v4 Yinghai Lu
2008-04-29 19:00 ` [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v5 Eric W. Biederman
2008-04-29 20:04 ` Yinghai Lu
2008-04-29 20:29 ` Eric W. Biederman
2008-04-29 21:57 ` Yinghai Lu
2008-04-29 22:09 ` Ingo Molnar
2008-04-29 22:18 ` Yinghai Lu
2008-04-29 22:14 ` Eric W. Biederman
2008-04-29 22:54 ` Thomas Gleixner
2008-04-30 1:16 ` Eric W. Biederman
2008-04-30 9:57 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4817B5B0.5090606@googlemail.com \
--to=nix.or.die@googlemail.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.fischer@zoopnet.de \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).