From: Stas Sergeev <stsp@aknet.ru>
To: Takashi Iwai <tiwai@suse.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.25-mm1 (snd-pcsp doesn't like DEBUG_PAGEALLOC)
Date: Tue, 06 May 2008 20:51:17 +0400 [thread overview]
Message-ID: <48208C85.30606@aknet.ru> (raw)
In-Reply-To: <s5hr6cfd99m.wl%tiwai@suse.de>
Hello.
Takashi Iwai wrote:
> The case (c) was my proposal. But in this case, the driver will
> become likely self consistent; it allocates its own device at init.
> In anyway, there is no sexy way to auto-load snd-pcsp (partly because
> it's the purpose -- avoid loading the sound subsystem unless really
> necessary). That's why I called it hackish.
I thought all (or most) alsa drivers
are allocating device on init, even
though this is explicitly discouraged
in the docs. So I was considering this
as a possible solution with the minimal
drawback.
But... as long as the autoloading by
default is not needed, and both drivers
can be at least built together, and not
too much distros have pcspkr built-in,
I thought the current solution - having
pcspkr as the default but to let the user
to choose snd-pcsp, is not all that bad
too. I guess it costs only adding a single
alias into modprobe.conf to choose snd-pcsp.
And I also think _most_ distros do not
mind having the sound subsystem loaded
by default, but some certainly do. For
those that do, the user will have to add
an alias. For others - he may get snd-pcsp
right away. IMHO this is rather acceptable.
next prev parent reply other threads:[~2008-05-06 16:51 UTC|newest]
Thread overview: 109+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-18 8:47 2.6.25-mm1 Andrew Morton
2008-04-18 11:26 ` [PATCH] 2.6.25-mm1 - Build Failure with PWRficient onchip memory controller driver Kamalesh Babulal
2008-04-18 13:02 ` StackProtector Oopses - Re: 2.6.25-mm1 Reuben Farrelly
2008-04-18 13:36 ` Ingo Molnar
2008-04-18 13:51 ` Arjan van de Ven
2008-04-18 14:41 ` Reuben Farrelly
2008-04-18 14:49 ` Reuben Farrelly
2008-04-21 15:06 ` Ingo Molnar
2008-04-22 1:48 ` Arjan van de Ven
2008-04-22 2:04 ` Valdis.Kletnieks
2008-04-22 8:34 ` Ingo Molnar
2008-04-22 14:29 ` Arjan van de Ven
2008-04-18 16:40 ` 2.6.25-mm1 (build error: driver core) Randy Dunlap
2008-04-18 16:56 ` Greg KH
2008-04-18 18:38 ` Dan Williams
2008-04-18 16:45 ` 2.6.25-mm1 (build error: trace selftest) Randy Dunlap
2008-04-18 20:14 ` 2.6.25-mm1 Valdis.Kletnieks
2008-04-18 23:09 ` 2.6.25-mm1: orphaned files after build Alexey Dobriyan
2008-04-19 2:13 ` 2.6.25-mm1 Joseph Fannin
2008-04-19 3:02 ` 2.6.25-mm1 Andrew Morton
2008-04-19 4:14 ` 2.6.25-mm1 Dmitry Torokhov
2008-04-19 4:29 ` 2.6.25-mm1 Andrew Morton
2008-04-19 6:33 ` 2.6.25-mm1 Joseph Fannin
2008-04-21 11:07 ` 2.6.25-mm1 Takashi Iwai
2008-04-21 17:44 ` 2.6.25-mm1 (snd-pcsp causes driver conflict) Stas Sergeev
2008-04-22 10:09 ` Takashi Iwai
2008-04-22 17:54 ` Stas Sergeev
2008-04-23 8:55 ` Takashi Iwai
2008-04-23 14:14 ` Takashi Iwai
2008-04-21 19:45 ` 2.6.25-mm1 Stas Sergeev
2008-04-21 14:06 ` 2.6.25-mm1 Takashi Iwai
2008-04-21 17:55 ` 2.6.25-mm1 (snd-pcsp doesn't like DEBUG_PAGEALLOC) Stas Sergeev
2008-04-22 10:13 ` Takashi Iwai
2008-04-22 14:01 ` Dmitry Torokhov
2008-04-22 16:42 ` Stas Sergeev
2008-04-22 18:31 ` Stas Sergeev
2008-04-23 8:49 ` Takashi Iwai
2008-04-23 14:18 ` Takashi Iwai
2008-04-23 20:02 ` Stas Sergeev
2008-04-24 9:40 ` Takashi Iwai
2008-04-25 3:51 ` Stas Sergeev
2008-04-25 6:28 ` Takashi Iwai
2008-04-25 16:45 ` Stas Sergeev
2008-04-25 16:51 ` Takashi Iwai
2008-04-25 17:25 ` Stas Sergeev
2008-05-02 16:44 ` Takashi Iwai
2008-05-02 16:57 ` Stas Sergeev
2008-05-06 10:20 ` Takashi Iwai
2008-05-06 16:51 ` Stas Sergeev [this message]
2008-04-25 18:09 ` Dmitry Torokhov
2008-04-25 18:31 ` Stas Sergeev
2008-04-25 18:37 ` Dmitry Torokhov
2008-04-19 2:25 ` 2.6.25-mm1 Joseph Fannin
2008-04-19 3:08 ` 2.6.25-mm1 Andrew Morton
2008-04-19 3:10 ` 2.6.25-mm1 Joseph Fannin
2008-04-19 3:29 ` 2.6.25-mm1 Andrew Morton
2008-04-19 13:25 ` 2.6.25-mm1 Andres Salomon
2008-04-19 17:38 ` 2.6.25-mm1 Andrew Morton
2008-04-19 17:50 ` 2.6.25-mm1 Andres Salomon
2008-04-21 14:56 ` 2.6.25-mm1 Jordan Crouse
2008-04-21 15:05 ` 2.6.25-mm1 Andres Salomon
2008-04-21 15:12 ` 2.6.25-mm1 Jordan Crouse
2008-04-19 17:39 ` [PATCH 1/2] OLPC: Add support for calling into Open Firmware Andres Salomon
2008-04-20 10:34 ` Yinghai Lu
2008-04-20 12:07 ` H. Peter Anvin
2008-04-20 17:59 ` Andres Salomon
2008-04-20 18:42 ` Mitch Bradley
2008-04-20 19:12 ` H. Peter Anvin
2008-04-21 3:39 ` Mitch Bradley
2008-04-21 4:54 ` Yinghai Lu
2008-04-21 8:22 ` Mitch Bradley
2008-04-21 11:36 ` H. Peter Anvin
2008-04-21 13:09 ` H. Peter Anvin
2008-04-21 13:13 ` H. Peter Anvin
2008-04-21 13:19 ` H. Peter Anvin
2008-04-21 15:05 ` Jordan Crouse
2008-04-21 14:58 ` H. Peter Anvin
2008-04-20 19:13 ` [PATCH 1/2] " H. Peter Anvin
2008-04-21 3:09 ` Mitch Bradley
2008-04-21 3:15 ` Yinghai Lu
2008-04-21 4:05 ` Mitch Bradley
2008-04-21 4:26 ` David Miller
2008-04-21 4:50 ` Yinghai Lu
2008-04-21 8:03 ` Mitch Bradley
2008-04-21 14:24 ` Andres Salomon
2008-04-21 15:54 ` David Woodhouse
2008-04-21 16:57 ` H. Peter Anvin
2008-04-21 18:54 ` David Woodhouse
2008-04-21 17:03 ` Andres Salomon
2008-04-21 19:18 ` David Woodhouse
2008-04-21 19:46 ` Andres Salomon
2008-04-21 20:25 ` David Woodhouse
2008-04-21 21:02 ` [PATCH] OLPC: only check for OFW signature on VSA-less Geodes Andres Salomon
2008-04-21 21:17 ` Jordan Crouse
2008-04-21 21:17 ` [PATCH] " David Woodhouse
2008-04-29 3:06 ` Andrew Morton
2008-04-29 5:32 ` [PATCH] x86: GEODE: cache results from geode_has_vsa2() and uninline Andres Salomon
2008-04-29 20:35 ` Andrew Morton
2008-04-29 20:57 ` Andres Salomon
2008-04-19 17:39 ` [PATCH 2/2] OLPC: drop pre-OpenFirmware workarounds Andres Salomon
2008-04-19 18:21 ` 2.6.25-mm1 Arjan van de Ven
2008-04-20 11:29 ` internal compiler error: SIGSEGV [Was: 2.6.25-mm1] Jiri Slaby
2008-04-21 8:31 ` Jiri Slaby
2008-04-21 9:06 ` Al Viro
2008-04-21 9:37 ` fault in __d_lookup " Jiri Slaby
2008-04-21 9:45 ` Al Viro
2008-04-21 9:59 ` Jiri Slaby
2008-04-21 13:42 ` Rafael J. Wysocki
2008-04-21 17:23 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48208C85.30606@aknet.ru \
--to=stsp@aknet.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox