Hi all, I'm sorry to bother you all with this question, but I don't know how to solve this by myself. Well, my laptop, HP dv5194ea, comes with an Intel ipw3945 wireless card, the card worked well with ipw3945 driver on Gentoo distribution, yesterday I was playing with a pcmcia wireless card (as usual) when my system crashed/freezed, after a forced shutdown I get this error when I load the driver for the ipw3945 card: PCI: Device 0000:06:00.0 not available because of resource 0 collisions this is what I've found out 'till now: lspci says: ----- 06:00.0 Non-VGA unclassified device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) Subsystem: Hewlett-Packard Company Device 135c Flags: bus master, fast devsel, latency 0, IRQ 3 Memory at (32-bit, non-prefetchable) Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 22-e9-36-ff-ff-02-13-00 Kernel modules: ipw3945 ----- Sounds a bit strange "Non-VGA ...", and so does "Memory at ".. Then: ----- # cat /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/resource: 0x0000000000000000 0x0000000000000fff 0x0000000000000200 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 but: # cat: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/resource0: Input/output error ----- Twist of fate: the card works well as usual under Windows XP, but gives the same error booting from a Linux LiveCD. You can find the dmesg output attacched to this mail if it can help. Thank you in advance, and please CC me in answer or comments, I'm not a list subscriber. Thank you