* WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c0): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
@ 2008-05-12 5:07 abhiruchi.g
2008-05-12 14:39 ` Sergei Shtylyov
0 siblings, 1 reply; 2+ messages in thread
From: abhiruchi.g @ 2008-05-12 5:07 UTC (permalink / raw)
To: linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
kernel-testers
Hi all,
I am trying to configure the kernel for mips(DB1200 bosrd).I am getting this warning.
how to remove this warning?
WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c0): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c4): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr
My kernel hangs after this:
===========================
Waiting 10sec before mounting root device...
scsi 0:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda:<7>usb-storage: queuecommand called
sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
VFS: Mounted root (ext2 filesystem) readonly.
mount_block_root: name=/dev/root fs=ext2 flags=32769
Freeing unused kernel memory: 164k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
Thanks,
Abhi
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c0): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
2008-05-12 5:07 WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c0): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr') abhiruchi.g
@ 2008-05-12 14:39 ` Sergei Shtylyov
0 siblings, 0 replies; 2+ messages in thread
From: Sergei Shtylyov @ 2008-05-12 14:39 UTC (permalink / raw)
To: abhiruchi.g
Cc: linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
kernel-testers
Hello.
abhiruchi.g@vaultinfo.com wrote:
> Hi all,
> I am trying to configure the kernel for mips(DB1200 bosrd).I am getting this warning.
> how to remove this warning?
> WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c0): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
> WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c4): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr
Which kernel version are you building? I'mnot seeing anything alike.
WBR, Sergei
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-05-12 14:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-12 5:07 WARNING: arch/mips/au1000/common/built-in.o(.text+0x15c0): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr') abhiruchi.g
2008-05-12 14:39 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox