From: Robert Hancock <hancockr@shaw.ca>
To: Alessandro Suardi <alessandro.suardi@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: SATA disk reports DRDY and goes to PIO0 eventually. noapic fixes it
Date: Sun, 18 May 2008 20:08:18 -0600 [thread overview]
Message-ID: <4830E112.9010602@shaw.ca> (raw)
In-Reply-To: <fa.jF9ypkPPBXioKUr869XKpRZGAa4@ifi.uio.no>
Alessandro Suardi wrote:
> Since some time I noticed my nephew's Fedora 8 box would have
> some noise in /var/log/messages with timeouts reported by the
> SATA layer, with the drive in DRDY state. Flux is like this (from
> the base Fedora 9 kernel installed today):
>
> May 17 17:18:39 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:18:39 rospo kernel: ata4.00: cmd
> a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
> May 17 17:18:39 rospo kernel: cdb 4a 01 00 00 10 00 00 00 08
> 00 00 00 00 00 00 00
> May 17 17:18:39 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:18:39 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:18:39 rospo kernel: ata4: soft resetting link
> May 17 17:18:39 rospo kernel: ata4.00: configured for UDMA/33
> May 17 17:18:39 rospo kernel: ata4: EH complete
> May 17 17:18:40 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:18:40 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:18:46 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:18:46 rospo kernel: ata4.00: cmd
> a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
> May 17 17:18:46 rospo kernel: cdb 4a 01 00 00 10 00 00 00 08
> 00 00 00 00 00 00 00
> May 17 17:18:46 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:18:46 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:18:46 rospo kernel: ata4: soft resetting link
> May 17 17:18:46 rospo kernel: ata4.00: configured for UDMA/33
> May 17 17:18:46 rospo kernel: ata4: EH complete
> May 17 17:18:53 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:18:53 rospo kernel: ata4.00: cmd
> a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
> May 17 17:18:53 rospo kernel: cdb 4a 01 00 00 10 00 00 00 08
> 00 00 00 00 00 00 00
> May 17 17:18:53 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:18:53 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:18:53 rospo kernel: ata4: soft resetting link
> May 17 17:18:54 rospo kernel: ata4.00: configured for UDMA/33
> May 17 17:18:54 rospo kernel: ata4: EH complete
> May 17 17:19:01 rospo kernel: ata4.00: limiting speed to UDMA/25:PIO4
> May 17 17:19:01 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:19:01 rospo kernel: ata4.00: cmd
> a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
> May 17 17:19:01 rospo kernel: cdb 4a 01 00 00 10 00 00 00 08
> 00 00 00 00 00 00 00
> May 17 17:19:01 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:19:01 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:19:01 rospo kernel: ata4: soft resetting link
> May 17 17:19:01 rospo kernel: ata4.00: configured for UDMA/25
> May 17 17:19:01 rospo kernel: ata4: EH complete
> May 17 17:19:01 rospo kernel: sr0: CDROM (ioctl) error, command: Get
> event status notification 4a 01 00 00 10 00 00 00 08 00
> May 17 17:19:01 rospo kernel: sr: Sense Key : Aborted Command
> [current] [descriptor]
> May 17 17:19:01 rospo kernel: sr: Add. Sense: No additional sense information
> May 17 17:19:06 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:19:06 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:19:11 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:19:11 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:19:11 rospo kernel: cdb 1e 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:19:11 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:19:11 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:19:11 rospo kernel: ata4: soft resetting link
> May 17 17:19:12 rospo kernel: ata4.00: configured for UDMA/25
> May 17 17:19:12 rospo kernel: ata4: EH complete
> May 17 17:19:22 rospo kernel: ata4.00: limiting speed to PIO4
> May 17 17:19:22 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:19:22 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:19:22 rospo kernel: cdb 1e 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:19:22 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:19:22 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:19:22 rospo kernel: ata4: soft resetting link
> May 17 17:19:22 rospo kernel: ata4.00: configured for PIO4
> May 17 17:19:22 rospo kernel: ata4: EH complete
> May 17 17:19:32 rospo kernel: ata4.00: limiting speed to PIO3
> May 17 17:19:32 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:19:32 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:19:32 rospo kernel: cdb 1e 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:19:32 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:19:32 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:19:32 rospo kernel: ata4: soft resetting link
> May 17 17:19:33 rospo kernel: ata4.00: configured for PIO3
> May 17 17:19:33 rospo kernel: ata4: EH complete
> May 17 17:19:43 rospo kernel: ata4.00: limiting speed to PIO0
> May 17 17:19:43 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:19:43 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:19:43 rospo kernel: cdb 1e 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:19:43 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:19:43 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:19:43 rospo kernel: ata4: soft resetting link
> May 17 17:19:43 rospo kernel: ata4.00: configured for PIO0
> May 17 17:19:43 rospo kernel: ata4: EH complete
> May 17 17:19:50 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:19:50 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:19:53 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:19:53 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:19:53 rospo kernel: cdb 1e 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:19:53 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:19:53 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:19:53 rospo kernel: ata4: soft resetting link
> May 17 17:19:54 rospo kernel: ata4.00: configured for PIO0
> May 17 17:19:54 rospo kernel: ata4: EH complete
> May 17 17:20:01 rospo kernel: ALSA sound/usb/usbaudio.c:1353: setting
> usb interface 1:1
> May 17 17:20:04 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:20:04 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:20:04 rospo kernel: cdb 1e 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:20:04 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:20:04 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:20:04 rospo kernel: ata4: soft resetting link
> May 17 17:20:04 rospo kernel: ata4.00: configured for PIO0
> May 17 17:20:04 rospo kernel: ata4: EH complete
> May 17 17:20:04 rospo kernel: sr 3:0:0:0: ioctl_internal_command
> return code = 8000002
> May 17 17:20:04 rospo kernel: : Sense Key : Aborted Command
> [current] [descriptor]
> May 17 17:20:04 rospo kernel: : Add. Sense: No additional sense information
> May 17 17:20:34 rospo kernel: ata4.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x2 frozen
> May 17 17:20:34 rospo kernel: ata4.00: cmd
> a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> May 17 17:20:34 rospo kernel: cdb 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> May 17 17:20:34 rospo kernel: res
> 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> May 17 17:20:34 rospo kernel: ata4.00: status: { DRDY }
> May 17 17:20:34 rospo kernel: ata4: soft resetting link
> May 17 17:20:35 rospo kernel: ata4.00: configured for PIO0
> May 17 17:20:35 rospo kernel: ata4: EH complete
>
> ..and on and on and on.
>
> Reading another report on lkml I turned to the ATA wiki @ kernel.org
> today, as even the newest Fedora 9 update (2.6.25.3-18) was still
> behaving the same way - pci=nomsi wasn't useful, acpi=off was
> also not useful, noapic did instead get rid of the messages, even
> under 'find /' (which would usually turn up the ATA resets in less
> than 10 seconds).
>
> Is there anything more useful than simply booting noapic that
> can be done here, or is that it ?
Please post the full dmesg output from bootup. We can't see what
controller type this is, etc.
next parent reply other threads:[~2008-05-19 2:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.jF9ypkPPBXioKUr869XKpRZGAa4@ifi.uio.no>
2008-05-19 2:08 ` Robert Hancock [this message]
2008-05-19 19:50 ` SATA disk reports DRDY and goes to PIO0 eventually. noapic fixes it Alessandro Suardi
2008-05-27 19:43 ` Andrew Morton
2008-05-27 21:19 ` Alessandro Suardi
2008-05-17 23:05 Alessandro Suardi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4830E112.9010602@shaw.ca \
--to=hancockr@shaw.ca \
--cc=alessandro.suardi@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox