From: Stefan Assmann <sassmann@suse.de>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Olaf Dabrunz <od@suse.de>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>,
Jon Masters <jonathan@jonmasters.org>,
LKML <linux-kernel@vger.kernel.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Jesse Barnes <jbarnes@virtuousgeek.org>
Subject: Re: [PATCH 1/7] add kernel cmdline option to disable pci-irq quirks
Date: Tue, 03 Jun 2008 19:00:06 +0200 [thread overview]
Message-ID: <48457896.8050902@suse.de> (raw)
In-Reply-To: <alpine.LFD.1.10.0806031211500.3235@apollo.tec.linutronix.de>
Thomas Gleixner schrieb:
> On Mon, 2 Jun 2008, Olaf Dabrunz wrote:
>
>> From: Olaf Dabrunz <od@suse.de>
>>
>> Add a switch to disable all boot interrupt quirks, using the parameter
>> nobootirqquirk.
>>
>
> This should be a parameter in the form of
>
> pci=ioapicquirk
>
> and not a separate and completely unintuitive thing.
>
> Thanks,
> tglx
>
>
Introducing 2 parameters then:
pci=ioapicreroute to enable rerouting of interrupts to the primary io-apic,
pci=noioapicquirk to disable all sorts of io-apic quirks.
This implies that disabling boot interrupts, on bridges where we know
how to do it, will be enabled by default. I'd favor this solution
because I can't think of any harm this could possibly cause. Boot
interrupts shouldn't happen on systems that run in apic mode.
>> Signed-off-by: Olaf Dabrunz <od@suse.de>
>> Signed-off-by: Stefan Assmann <sassmann@suse.de>
>> ---
>> drivers/pci/quirks.c | 15 +++++++++++++++
>> 1 files changed, 15 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index dabb563..6245486 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -1363,6 +1363,21 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
>>
>> +
>> +#ifdef CONFIG_X86_IO_APIC
>> +int nobootirqquirk __read_mostly = 0;
>> +
>> +int nobootirqquirk_setup(char *str)
>> +{
>> + nobootirqquirk = 1;
>> + printk(KERN_INFO "Boot IRQ quirk handling disabled\n");
>> +
>> + return 1;
>> +}
>> +__setup("nobootirqquirk", nobootirqquirk_setup);
>> +#endif /* CONFIG_X86_IO_APIC */
>> +
>> +
>> /*
>> * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
>> * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
>> --
>> 1.5.2.4
>>
>> --
>> Olaf Dabrunz (od/odabrunz), SUSE Linux Products GmbH, N??rnberg
>>
>>
Stefan
--
Stefan Assmann | SUSE LINUX Products GmbH
Software Engineer | Maxfeldstr. 5, D-90409 Nuernberg
Mail : sassmann@suse.de | GF: Markus Rex, HRB 16746 (AG Nuernberg)
next prev parent reply other threads:[~2008-06-03 17:00 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-02 12:45 [PATCH 0/7] Boot IRQ quirks and rerouting Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 1/7] add kernel cmdline option to disable pci-irq quirks Olaf Dabrunz
2008-06-03 10:13 ` Thomas Gleixner
2008-06-03 17:00 ` Stefan Assmann [this message]
2008-06-02 12:45 ` [PATCH 2/7] reroute PCI interrupt to legacy boot interrupt equivalent Olaf Dabrunz
2008-06-03 10:37 ` Thomas Gleixner
2008-06-03 22:59 ` Randy Dunlap
2008-06-12 14:14 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 3/7] disable legacy boot interrupt generation Olaf Dabrunz
2008-06-03 10:40 ` Thomas Gleixner
2008-06-02 12:45 ` [PATCH 4/7] disable broadcomm " Olaf Dabrunz
2008-06-03 10:46 ` Thomas Gleixner
2008-06-03 15:46 ` Jon Masters
2008-06-03 15:59 ` Olaf Dabrunz
2008-06-03 16:05 ` Jon Masters
2008-06-03 17:27 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 5/7] disable AMD/ATI " Olaf Dabrunz
2008-06-03 10:54 ` Thomas Gleixner
2008-06-12 14:14 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 6/7] disable pci legacy boot irq quirks on noapic boot Olaf Dabrunz
2008-06-03 10:55 ` Thomas Gleixner
2008-06-02 12:45 ` [PATCH 7/7] bootirqquirk= parameter to enable bootirq quirks for additional chips Olaf Dabrunz
2008-06-03 10:56 ` Thomas Gleixner
2008-06-04 10:06 ` Olaf Dabrunz
2008-06-02 16:43 ` [PATCH 0/7] Boot IRQ quirks and rerouting Olaf Dabrunz
2008-06-03 10:11 ` Thomas Gleixner
2008-06-03 17:08 ` Olaf Dabrunz
2008-06-03 10:21 ` Olaf Dabrunz
2008-06-03 15:52 ` Jon Masters
2008-06-03 16:17 ` Stefan Assmann
2008-06-03 16:56 ` Olaf Dabrunz
2008-06-04 2:35 ` Eric W. Biederman
2008-06-04 9:49 ` Stefan Assmann
2008-06-04 10:45 ` Eric W. Biederman
2008-06-04 11:33 ` Stefan Assmann
2008-06-04 15:52 ` Maciej W. Rozycki
2008-06-04 16:08 ` Thomas Gleixner
2008-06-04 17:18 ` Maciej W. Rozycki
2008-06-04 17:33 ` Thomas Gleixner
2008-06-04 17:53 ` Maciej W. Rozycki
2008-06-04 18:35 ` Thomas Gleixner
2008-06-04 18:51 ` Maciej W. Rozycki
2010-02-16 0:30 ` Yuhong Bao
2008-06-04 18:57 ` Jon Masters
2008-06-04 19:19 ` Maciej W. Rozycki
2008-06-04 19:59 ` Jon Masters
2008-06-04 22:07 ` Maciej W. Rozycki
2008-06-04 22:27 ` Jon Masters
2008-06-04 23:08 ` Maciej W. Rozycki
2008-06-04 11:37 ` Olaf Dabrunz
2008-06-04 18:44 ` Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48457896.8050902@suse.de \
--to=sassmann@suse.de \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=jonathan@jonmasters.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=od@suse.de \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox