Re: PCI MSI issue with reinserting a driver

[Marc Zyngier <maz@kernel.org>]

On 2021-02-02 12:38, John Garry wrote:
>>> Here's my suspicion: two of the interrupts are mapped in the 
>>> low-level
>>> domain (the ITS, I'd expect in your case), but they have never been
>>> mapped at the higher level.
>>> 
>>> On teardown, we only get rid of the 30 that were actually mapped, and
>>> leave the last two dangling in the ITS domain, and thus the ITS 
>>> device
>>> resources are never freed. On reload, we request another 32
>>> interrupts, which can't be satisfied for this device.
>>> 
>>> Assuming I got it right, the question is: why weren't these 
>>> interrupts
>>> mapped in the PCI domain the first place. And if I got it wrong, I'm
>>> even more curious!
>> 
>> Not sure. I also now notice an error for the SAS PCI driver on D06 
>> when nr_cpus < 16, which means number of MSI vectors allocated < 32, 
>> so looks the same problem. There we try to allocate 16 + max(nr cpus, 
>> 16) MSI.
>> 
>> Anyway, let me have a look today to see what is going wrong.
>> 
> Could this be the problem:
> 
> nr_cpus=11
> 
> In alloc path, we have:
> 	its_alloc_device_irq(nvecs=27 = 16+11)
> 	  bitmap_find_free_region(order = 5);
> In free path, we have:
> 	its_irq_domain_free(nvecs = 1) and free each 27 vecs
> 	  bitmap_release_region(order = 0)
> 
> So we allocate 32 bits, but only free 27. And 2nd alloc for 32 fails.
> 
> FWIW, this hack seems to fix it:
> 
> ---->8-----
> 
> diff --git a/drivers/irqchip/irq-gic-v3-its.c 
> b/drivers/irqchip/irq-gic-v3-its.c
> index ac5412b284e6..458ea0ebea2b 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> 
> @@ -3533,34 +3534,39 @@ static int its_irq_domain_alloc(struct
> irq_domain *domain, unsigned int virq,
>  	struct its_device *its_dev = info->scratchpad[0].ptr;
>  	struct its_node *its = its_dev->its;
>  	struct irq_data *irqd;
> -	irq_hw_number_t hwirq;
> +	irq_hw_number_t hwirq[nr_irqs]; //vla :(
>  	int err;
>  	int i;
> 
> -	err = its_alloc_device_irq(its_dev, nr_irqs, &hwirq);
> +	for (i = 0; i < nr_irqs; i++) {
> +		err = its_alloc_device_irq(its_dev, 1, &hwirq[i]);
> +		if (err) //tidy
> +			return err;
> +	}
> +
> -	if (err)
> -		return err;
> 
>  	err = iommu_dma_prepare_msi(info->desc, its->get_msi_base(its_dev));
>  	if (err)
>  		return err;
> 
>  	for (i = 0; i < nr_irqs; i++) {
> -		err = its_irq_gic_domain_alloc(domain, virq + i, hwirq + i);
> +		err = its_irq_gic_domain_alloc(domain, virq + i, hwirq[i]);
>  		if (err)
>  			return err;
> 
>  		irq_domain_set_hwirq_and_chip(domain, virq + i,
> -					      hwirq + i, &its_irq_chip, its_dev);
> +					      hwirq[i], &its_irq_chip, its_dev);
>  		irqd = irq_get_irq_data(virq + i);
>  		irqd_set_single_target(irqd);
>  		irqd_set_affinity_on_activate(irqd);
>  		pr_debug("ID:%d pID:%d vID:%d\n",
> -			 (int)(hwirq + i - its_dev->event_map.lpi_base),
> -			 (int)(hwirq + i), virq + i);
> +			 (int)(hwirq[i] - its_dev->event_map.lpi_base),
> +			 (int)(hwirq[i]), virq + i);
>  	}
> ----8<-----
> 
> 
> But I'm not sure that we have any requirement for those map bits to be
> consecutive.

We can't really do that. All the events must be contiguous,
and there is also a lot of assumptions in the ITS driver that
LPI allocations is also contiguous.

But there is also the fact that for Multi-MSI, we *must*
allocate 32 vectors. Any driver could assume that if we have
allocated 17 vectors, then there is another 15 available.

My question still stand: how was this working with the previous
behaviour?

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...