public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Glauber Costa <gcosta@redhat.com>
To: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	tglx@linutronix.de, mingo@elte.hu, hugh@veritas.com
Subject: Re: [PATCH 11/15] x86: move enabling of io_apic to prepare_cpus
Date: Mon, 09 Jun 2008 16:44:19 -0300	[thread overview]
Message-ID: <484D8813.4040807@redhat.com> (raw)
In-Reply-To: <Pine.LNX.4.55.0806091620250.26593@cliff.in.clinika.pl>

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

Maciej W. Rozycki wrote:
> On Mon, 9 Jun 2008, Glauber Costa wrote:
> 
>> Do it, instead of keeping in io_apic_32.c. This is the way x86_64
>> already does.
> 
>  This change looks wrong -- is native_smp_prepare_cpus() at all run on
> !CONFIG_SMP?  I don't think so.  You have to do this differently.
> 
>   Maciej

How about this one instead?

This one does enable_IO_APIC in the init_uniprocessor too, and should 
account for the !smp case.

[-- Attachment #2: 0001-x86-move-enabling-of-io_apic-to-prepare_cpus.patch --]
[-- Type: text/x-patch, Size: 2526 bytes --]

>From 87f8366012e1dc3cf7212e241b0aa552d7825338 Mon Sep 17 00:00:00 2001
From: Glauber Costa <gcosta@redhat.com>
Date: Wed, 28 May 2008 17:04:12 -0300
Subject: [PATCH] x86: move enabling of io_apic to prepare_cpus

Do it, instead of keeping in io_apic_32.c. This is the way x86_64 already does.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
---
 arch/x86/kernel/apic_32.c    |    3 +++
 arch/x86/kernel/io_apic_32.c |    4 ++--
 arch/x86/kernel/smpboot.c    |    2 +-
 include/asm-x86/hw_irq.h     |    2 --
 4 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index fa8cf79..8385dc6 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -1273,6 +1273,9 @@ int __init APIC_init_uniprocessor(void)
 	setup_local_APIC();
 
 #ifdef CONFIG_X86_IO_APIC
+	if (!skip_ioapic_setup && nr_ioapics)
+		enable_IO_APIC();
+
 	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
 #endif
 		localise_nmi_watchdog();
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 7fc071f..fa4f0a0 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -1606,7 +1606,7 @@ void /*__init*/ print_PIC(void)
 
 #endif  /*  0  */
 
-static void __init enable_IO_APIC(void)
+void __init enable_IO_APIC(void)
 {
 	union IO_APIC_reg_01 reg_01;
 	int i8259_apic, i8259_pin;
@@ -2295,7 +2295,7 @@ void __init setup_IO_APIC(void)
 	for (i = first_system_vector; i < NR_VECTORS; i++)
 		set_bit(i, used_vectors);
 
-	enable_IO_APIC();
+	/* calling enable_IO_APIC() is moved to setup_local_APIC for BP */
 
 	if (acpi_ioapic)
 		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f5ac5b2..e537c7b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1175,7 +1175,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	 */
 	setup_local_APIC();
 
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_IO_APIC
 	/*
 	 * Enable IO APIC before setting up error vector
 	 */
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
index 18f067c..4c81d1b 100644
--- a/include/asm-x86/hw_irq.h
+++ b/include/asm-x86/hw_irq.h
@@ -67,9 +67,7 @@ extern void print_IO_APIC(void);
 extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
 extern void setup_ioapic_dest(void);
 
-#ifdef CONFIG_X86_64
 extern void enable_IO_APIC(void);
-#endif
 
 /* IPI functions */
 extern void send_IPI_self(int vector);
-- 
1.5.4.5


  parent reply	other threads:[~2008-06-09 19:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-09 14:16 [PATCH 0/15] Improve x86 smpboot integration Glauber Costa
2008-06-09 14:16 ` [PATCH 01/15] x86: use stack_start in x86_64 Glauber Costa
2008-06-09 14:16   ` [PATCH 02/15] x86: don't use gdt_page openly Glauber Costa
2008-06-09 14:16     ` [PATCH 03/15] x86: remove early_gdt_descr reference Glauber Costa
2008-06-09 14:16       ` [PATCH 04/15] x86: move x86_64 gdt closer to i386 Glauber Costa
2008-06-09 14:16         ` [PATCH 05/15] x86: use initial_code for i386 Glauber Costa
2008-06-09 14:16           ` [PATCH 06/15] x86: boot secondary cpus through initial_code Glauber Costa
2008-06-09 14:16             ` [PATCH 07/15] x86: clearing io_apic harmless for x86_64 Glauber Costa
2008-06-09 14:16               ` [PATCH 08/15] x86: remove ifdef from stepping Glauber Costa
2008-06-09 14:16                 ` [PATCH 09/15] x86: change __setup_vector_irq with setup_vector_irq Glauber Costa
2008-06-09 14:16                   ` [PATCH 10/15] x86: provide connect_bsp_APIC for x86_64 Glauber Costa
2008-06-09 14:16                     ` [PATCH 11/15] x86: move enabling of io_apic to prepare_cpus Glauber Costa
2008-06-09 14:16                       ` [PATCH 12/15] x86: change naming to match x86_64 Glauber Costa
2008-06-09 14:16                         ` [PATCH 13/15] x86: remove cpu from maps Glauber Costa
2008-06-09 14:16                           ` [PATCH 14/15] x86: move cpu_exit_clear to process_32.c Glauber Costa
2008-06-09 14:16                             ` [PATCH 15/15] x86: take load_sp0 out of smpboot.c Glauber Costa
2008-06-09 15:23                       ` [PATCH 11/15] x86: move enabling of io_apic to prepare_cpus Maciej W. Rozycki
2008-06-09 15:52                         ` Glauber Costa
2008-06-09 19:44                         ` Glauber Costa [this message]
2008-06-09 20:12                           ` Maciej W. Rozycki
2008-06-09 20:53                             ` Yinghai Lu
2008-06-09 21:00                               ` Maciej W. Rozycki
2008-06-10  2:46                                 ` Maciej W. Rozycki
2008-06-10  5:08                                   ` Yinghai Lu
2008-06-10 13:00                                     ` Glauber Costa
2008-06-10 13:30                                       ` Maciej W. Rozycki
2008-06-10 19:09                                         ` Yinghai Lu
2008-06-10 19:36                                           ` Maciej W. Rozycki
2008-06-10 19:49                                             ` Yinghai Lu
2008-06-11  0:29                                               ` Maciej W. Rozycki
2008-06-11  2:32                                                 ` Yinghai Lu
2008-06-11 12:57                                                   ` Maciej W. Rozycki
2008-06-09 21:02                             ` Glauber Costa
2008-06-09 15:23       ` [PATCH 03/15] x86: remove early_gdt_descr reference James Bottomley
2008-06-09 15:49         ` Glauber Costa
2008-06-09 17:20           ` James Bottomley
2008-06-09 17:23             ` Glauber Costa
2008-06-09 17:40               ` James Bottomley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=484D8813.4040807@redhat.com \
    --to=gcosta@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=hugh@veritas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=macro@linux-mips.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox