public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Pierre Ossman <drzeus@drzeus.cx>, Nicolas Pitre <nico@cam.org>
Cc: ARM Linux Mailing List <linux-arm-kernel@lists.arm.linux.org.uk>,
	Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: sdio: bad CISTPL_FUNCE error
Date: Fri, 20 Jun 2008 17:24:35 +0200	[thread overview]
Message-ID: <485BCBB3.20405@atmel.com> (raw)

Hi Pierre,

While trying to setup a GPS SDIO card, I experience the following error: 
"mmc0: bad CISTPL_FUNCE size 28 type 1"

I use a combo card but without mirco sd card inserted.
http://www.spectec.com.tw/sdg810.htm

Tracing in sdio_cis.c file, I print the tpl_code (line 216).
I have 3 successive codes : 0xff, 0x21 & 0x22.

Is this a host controller driver issue ? or the using of a non 
supported combo SDIO card (with GPS function not probed first) ?


Here is a little log :
"
[..SDIO init & many 52 commands..]
mmc0: starting CMD52 arg 00209e00 flags 00000195
Sending command 52 as 00001074, arg = 00209E00, blocks = 0, length = 0 (MR = 00001B84)
MCI irq: status = 0000C3E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c3e5 [000010FF 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000
mmc0: *read tpl 0xff*
mmc0: clock 25000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 timing 0
clkdiv = 1. mcck = 24832000
MMC: Setting controller bus width to 1
mmc0: starting CMD52 arg 00000e00 flags 00000195
Sending command 52 as 00001074, arg = 00000E00, blocks = 0, length = 0 (MR = 00001B01)
MCI irq: status = 0000C3E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c3e5 [00001040 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000

[..many 52 commands..]

mmc0: starting CMD52 arg 0020a000 flags 00000195
Sending command 52 as 00001074, arg = 0020A000, blocks = 0, length = 0 (MR = 00001B01)
MCI irq: status = 0000C1E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c1e5 [00001021 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 00001021 00000000 00000000 00000000
mmc0: *read tpl 0x21*
mmc0: starting CMD52 arg 0020a200 flags 00000195
Sending command 52 as 00001074, arg = 0020A200, blocks = 0, length = 0 (MR = 00001B01)
MCI irq: status = 0000C1E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c1e5 [00001002 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000

[2 CMD52]

mmc0: starting CMD52 arg 0020a800 flags 00000195
Sending command 52 as 00001074, arg = 0020A800, blocks = 0, length = 0 (MR = 00001B01)
MCI irq: status = 0000C0E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c0e5 [00001022 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 00001022 00000000 00000000 00000000
mmc0: *read tpl 0x22*
mmc0: starting CMD52 arg 0020aa00 flags 00000195
Sending command 52 as 00001074, arg = 0020AA00, blocks = 0, length = 0 (MR = 00001B01)
MCI irq: status = 0000C1E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c1e5 [0000101C 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 0000101c 00000000 00000000 00000000
mmc0: starting CMD52 arg 0020ac00 flags 00000195

[many CMD52]

mmc0: starting CMD52 arg 0020e200 flags 00000195
Sending command 52 as 00001074, arg = 0020E200, blocks = 0, length = 0 (MR = 00001B01)
MCI irq: status = 0000C0E5, C07F0001, 00000001
Command ready
Completed command
Status = 00000001/0000c0e5 [00001000 00000000 00000000 00000000]
mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
mmc0: bad CISTPL_FUNCE size 28 type 1
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
MMC: Setting controller bus width to 1
mmc0: error -22 whilst initialising SDIO card
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
MMC: Setting controller bus width to 1
"

-- 
Nicolas Ferre


             reply	other threads:[~2008-06-20 15:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-20 15:24 Nicolas Ferre [this message]
2008-06-21 15:00 ` sdio: bad CISTPL_FUNCE error Nicolas Pitre
2008-06-23 14:12   ` Nicolas Ferre
2008-06-23 15:09     ` Nicolas Pitre
2008-06-24  9:34       ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=485BCBB3.20405@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=drzeus@drzeus.cx \
    --cc=linux-arm-kernel@lists.arm.linux.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nico@cam.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox