[PATCH net-next v4 5/7] net: dsa: lantiq_gswip: load model-specific microcode

[Daniel Golle <daniel@makrotopia.org>]

Load microcode as specified in struct hw_info instead of relying on
a single array of instructions. This is done in preparation to allow
loading different microcode for the MaxLinear GSW1xx family.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
v4: no changes
v3: no changes
v2: no changes

 drivers/net/dsa/lantiq_gswip.c | 14 +++++++++-----
 drivers/net/dsa/lantiq_gswip.h |  9 +++++++++
 drivers/net/dsa/lantiq_pce.h   |  9 ++-------
 3 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index d988839dce2f..1ce9ef425082 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -500,15 +500,15 @@ static int gswip_pce_load_microcode(struct gswip_priv *priv)
 			  GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, GSWIP_PCE_TBL_CTRL);
 	gswip_switch_w(priv, 0, GSWIP_PCE_TBL_MASK);
 
-	for (i = 0; i < ARRAY_SIZE(gswip_pce_microcode); i++) {
+	for (i = 0; i < priv->hw_info->pce_microcode_size; i++) {
 		gswip_switch_w(priv, i, GSWIP_PCE_TBL_ADDR);
-		gswip_switch_w(priv, gswip_pce_microcode[i].val_0,
+		gswip_switch_w(priv, (*priv->hw_info->pce_microcode)[i].val_0,
 			       GSWIP_PCE_TBL_VAL(0));
-		gswip_switch_w(priv, gswip_pce_microcode[i].val_1,
+		gswip_switch_w(priv, (*priv->hw_info->pce_microcode)[i].val_1,
 			       GSWIP_PCE_TBL_VAL(1));
-		gswip_switch_w(priv, gswip_pce_microcode[i].val_2,
+		gswip_switch_w(priv, (*priv->hw_info->pce_microcode)[i].val_2,
 			       GSWIP_PCE_TBL_VAL(2));
-		gswip_switch_w(priv, gswip_pce_microcode[i].val_3,
+		gswip_switch_w(priv, (*priv->hw_info->pce_microcode)[i].val_3,
 			       GSWIP_PCE_TBL_VAL(3));
 
 		/* start the table access: */
@@ -2001,6 +2001,8 @@ static const struct gswip_hw_info gswip_xrx200 = {
 	.allowed_cpu_ports = BIT(6),
 	.mii_ports = BIT(0) | BIT(1) | BIT(5),
 	.phylink_get_caps = gswip_xrx200_phylink_get_caps,
+	.pce_microcode = &gswip_pce_microcode,
+	.pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode),
 };
 
 static const struct gswip_hw_info gswip_xrx300 = {
@@ -2008,6 +2010,8 @@ static const struct gswip_hw_info gswip_xrx300 = {
 	.allowed_cpu_ports = BIT(6),
 	.mii_ports = BIT(0) | BIT(5),
 	.phylink_get_caps = gswip_xrx300_phylink_get_caps,
+	.pce_microcode = &gswip_pce_microcode,
+	.pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode),
 };
 
 static const struct of_device_id gswip_of_match[] = {
diff --git a/drivers/net/dsa/lantiq_gswip.h b/drivers/net/dsa/lantiq_gswip.h
index 1bd05348f1e1..3c60f14673a7 100644
--- a/drivers/net/dsa/lantiq_gswip.h
+++ b/drivers/net/dsa/lantiq_gswip.h
@@ -213,10 +213,19 @@
  */
 #define GSWIP_MAX_PACKET_LENGTH	2400
 
+struct gswip_pce_microcode {
+	u16 val_3;
+	u16 val_2;
+	u16 val_1;
+	u16 val_0;
+};
+
 struct gswip_hw_info {
 	int max_ports;
 	unsigned int allowed_cpu_ports;
 	unsigned int mii_ports;
+	const struct gswip_pce_microcode (*pce_microcode)[];
+	size_t pce_microcode_size;
 	void (*phylink_get_caps)(struct dsa_switch *ds, int port,
 				 struct phylink_config *config);
 };
diff --git a/drivers/net/dsa/lantiq_pce.h b/drivers/net/dsa/lantiq_pce.h
index e2be31f3672a..659f9a0638d9 100644
--- a/drivers/net/dsa/lantiq_pce.h
+++ b/drivers/net/dsa/lantiq_pce.h
@@ -7,6 +7,8 @@
  * Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de>
  */
 
+#include "lantiq_gswip.h"
+
 enum {
 	OUT_MAC0 = 0,
 	OUT_MAC1,
@@ -74,13 +76,6 @@ enum {
 	FLAG_NO,	/*13*/
 };
 
-struct gswip_pce_microcode {
-	u16 val_3;
-	u16 val_2;
-	u16 val_1;
-	u16 val_0;
-};
-
 #define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
 	{ val, msk, ((ns) << 10 | (out) << 4 | (len) >> 1),\
 		((len) & 1) << 15 | (type) << 13 | (flags) << 9 | (ipv4_len) << 8 }
-- 
2.50.1