From: "Espen Fjellvær Olsen" <espen@mrfjo.org>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: megaraid_mm not showing up in 2.6.25.2
Date: Sat, 09 Aug 2008 19:41:19 +0200 [thread overview]
Message-ID: <489DD6BF.5030403@mrfjo.org> (raw)
Hi!
We are experiencing that megaraid_mm wont register on a 2.6.25.2 on our
production server.
The module are compiled into the kernel, but /dev/megamon0 is not
created, and we dont find any signs in eg. /proc/devices so a manual
mknod would seem not to work.
We didnt experience this problem on 2.6.24.2 which were our previous kernel.
02:03.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
Subsystem: Dell MegaRAID 518 DELL PERC 4/DC RAID Controller
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 27
Memory at ff5f0000 (32-bit, prefetchable) [size=64K]
Expansion ROM at fc8f0000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
From kernel log:
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megaraid: probe new device 0x1000:0x1960:0x1028:0x0518: bus 2:slot 3:func 0
megaraid: fw version:[352B] bios version:[1.10]
--
Best Regards
Espen Fjellvær Olsen
Drift@tihlde
reply other threads:[~2008-08-09 18:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=489DD6BF.5030403@mrfjo.org \
--to=espen@mrfjo.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox