From: zhang wenjie <zwjsq@vip.sina.com>
To: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Markus Armbruster <armbru@redhat.com>,
Jeremy Fitzhardinge <jeremy@goop.org>,
Hugh Dickins <hugh@veritas.com>,
Ian Campbell <ijc@hellion.org.uk>,
linux-kernel@vger.kernel.org, Kel Modderman <kel@otaku42.de>,
Peter Zijlstra <a.p.zijlstra@chello.nl>
Subject: Re: kernel BUG at lib/radix-tree.c:473!
Date: Sun, 17 Aug 2008 22:00:50 +0800 [thread overview]
Message-ID: <48A82F12.70205@vip.sina.com> (raw)
In-Reply-To: <45a44e480808170509r48060254w7d85e51e8f09ffd0@mail.gmail.com>
Jaya Kumar wrote:
> On Thu, Aug 14, 2008 at 6:48 PM, Markus Armbruster <armbru@redhat.com> wrote:
>> Jeremy Fitzhardinge <jeremy@goop.org> writes:
>>
>>> Hugh Dickins wrote:
>>>> As you can see, I'm still groping towards the right answer.
>>>> The driver probably needs to provide its own backing_dev_info
>>>> (or point to a suitable default), and its own address_space_ops,
>>>> and perhaps more (there should be examples elsewhere). But whether
>>>> it is actually wrong, or whether I was wrong to mess it up, I've
>>>> not yet decided.
>>>>
>>> My understanding is that the driver is doing something a bit clever:
>>> it uses the page dirty flags to determine which parts of the
>>> framebuffer have been written to, and uses that information to
>>> minimize the amount of stuff that needs to be copied out. The writes
>> Yes.
>>
>>> to the pages are not expected to generate actual page faults.
>>>
>>> But I haven't really looked at it closely, and I'm not at all familiar
>>> with the vm at this layer. I'm not sure how it actually allocates the
>>> framebuffer memory for example (vmalloc? incrementally on faults?).
>> vmalloc()
>>
>>> I'm hoping Markus will leap in, since wrote this stuff. Or, gasp,
>>> I'll read the code myself.
>> The actual cleverness is in fb_defio[*], which was written by Jaya
>> Kumar (cc'ed). I merely ripped out the old, somewhat racy cleverness
>> I inherited from Anthony Liguori (which you can still admire in Xen's
>> 2.6.18 kernel), and switched over to use fb_defio instead. Because
>> one instance of clever code is enough.
>>
>> My understanding of fb_defio's inner workings is rather limited I
>> fear. I'm just using it.
>>
>> Jaya, could you help?
>>
>
> I will try my best. Ok, I read through the thread. My current
> understanding is as follows:
>
> - Jeremy observed this issue when starting Xorg with Xen pvfb on 2.6.27-rc1
> - Ian bisected it to 14fcc23fdc78e9d32372553ccf21758a9bd56fa1
> - Peter pointed out from the trace we may be dirtying a page not in
> the page cache
> - Hugh mentioned prior to the bisected patch maybe the faulting page
> had a .set_page_dirty that was ok but now it doesn't.
> - Jeremy pointed out that the fault is at 1 page in to the /dev/fb0 mapping
> - Hugh mentioned:
> " The driver probably needs to provide its own backing_dev_info
> (or point to a suitable default), and its own address_space_ops,
> and perhaps more (there should be examples elsewhere). But whether
> it is actually wrong, or whether I was wrong to mess it up, I've
> not yet decided. "
>
> In defio, the page mapping is provided through the vm_file that got
> setup during mmap.
> page->mapping = vma->vm_file->f_mapping;
>
> I haven't figured how setting inode->i_mapping->a_ops is affecting
> this. I will pull tip and test with metronomefb and see if I can
> reproduce the issue when starting Xfbdev on that and start debugging
> from there.
>
> Thanks,
> jaya
I have counted the same problem when i mmap the /dev/fb0 and memset it
to 0(the fb driver use deferred_io and when i do not use deferred_io it
works well) .This bug also showed int linux2.6.26 and linux2.6.25. and i
set some printk in the radix_tree_tag_set and fb_deferred_io_fault.
radix_tree_tag_set: height is 0
radix_tree_tag_set: index is 0
radix_tree_tag_set: radix_tree_maxindex(height) is 0
radix_tree_tag_set: height is 0
radix_tree_tag_set: index is 0
radix_tree_tag_set: radix_tree_maxindex(height) is 0
radix_tree_tag_set: height is 0
radix_tree_tag_set: index is 0
radix_tree_tag_set: radix_tree_maxindex(height) is 0
radix_tree_tag_set: height is 0
radix_tree_tag_set: index is 0
radix_tree_tag_set: radix_tree_maxindex(height) is 0
mmap address :0x40135000fb_deferred_io_fault, enter
fb_deferred_io_fault, leave
fb_deferred_io_mkwrite, enter
fb_deferred_io_mkwrite, leave
------------[ cut here ]------------
WARNING: at fs/buffer.c:711 __set_page_dirty+0xbc/0x18c()
Modules linked in: etrackfb_new sony_prs_505
[<c0024198>] (dump_stack+0x0/0x14) from [<c003bf40>]
(warn_on_slowpath+0x4c/0x84)
[<c003bef4>] (warn_on_slowpath+0x0/0x84) from [<c00a403c>]
(__set_page_dirty+0xbc/0x18c)
r6:c38114b0 r5:c0319b80 r4:c0272114
[<c00a3f80>] (__set_page_dirty+0x0/0x18c) from [<c00a433c>]
(__set_page_dirty_buffers+0xbc/0xd0)
r6:c3d01738 r5:00000001 r4:c0319b80
[<c00a4280>] (__set_page_dirty_buffers+0x0/0xd0) from [<c0069dc4>]
(set_page_dirty+0x54/0xdc)
[<c0069d70>] (set_page_dirty+0x0/0xdc) from [<c006a8a4>]
(set_page_dirty_balance+0x18/0x64)
r5:00000001 r4:c0319b80
[<c006a88c>] (set_page_dirty_balance+0x0/0x64) from [<c0071524>]
(__do_fault+0x3b8/0x3f0)
r5:c0319b80 r4:0bd5c0ff
[<c007116c>] (__do_fault+0x0/0x3f0) from [<c0072acc>]
(handle_mm_fault+0x2a8/0x3bc)
[<c0072824>] (handle_mm_fault+0x0/0x3bc) from [<c0025be0>]
(do_page_fault+0xe8/0x224)
[<c0025af8>] (do_page_fault+0x0/0x224) from [<c00201dc>]
(do_DataAbort+0x3c/0xa0)
[<c00201a0>] (do_DataAbort+0x0/0xa0) from [<c00209c0>]
(ret_from_exception+0x0/0x10)
Exception stack(0xc3edffb0 to 0xc3edfff8)
ffa0: 40135000 ffffffff 000752f8
40135000
ffc0: becdced4 000086b8 000086c4 00000001 00008520 00000000 4012f000
becdcea8
ffe0: 40089810 becdcd6c 00008670 40089838 20000010 ffffffff
r8:00008520 r7:00000001 r6:000086c4 r5:000086b8 r4:ffffffff
---[ end trace 7cf699b159b0c732 ]---
radix_tree_tag_set: height is 0
radix_tree_tag_set: index is 0
radix_tree_tag_set: radix_tree_maxindex(height) is 0
fb_deferred_io_fault, enter
fb_deferred_io_fault, leave
fb_deferred_io_mkwrite, enter
fb_deferred_io_mkwrite, leave
radix_tree_tag_set: height is 0
radix_tree_tag_set: index is 1
radix_tree_tag_set: radix_tree_maxindex(height) is 0
kernel BUG at lib/radix-tree.c:477!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c3d3c000
[00000000] *pgd=0bd53031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1]
Modules linked in: etrackfb_new sony_prs_505
CPU: 0 Tainted: G W (2.6.26-00011-g15bc467-dirty #1)
PC is at __bug+0x20/0x2c
LR is at log_wait+0x0/0x8
pc : [<c002418c>] lr : [<c0259200>] psr: 60000093
sp : c3edfda8 ip : c0259200 fp : c3edfdb4
r10: 00000000 r9 : c3edb780 r8 : c38114b4
r7 : 00000001 r6 : c38114b0 r5 : 00000000 r4 : c027ac68
r3 : 00000000 r2 : 00000001 r1 : 00000001 r0 : 00000027
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: c000717f Table: 0bd3c000 DAC: 00000015
Process framebuff.ko (pid: 215, stack limit = 0xc3ede260)
Stack: (0xc3edfda8 to 0xc3ee0000)
fda0: c3edfde4 c3edfdb8 c010fce4 c002417c 00000000
00000000
fdc0: c0319b60 c38114b0 00000000 40136000 c3edb780 00000000 c3edfe00
c3edfde8
fde0: c00a40d8 c010fc1c c0319b60 00000001 c3d01738 c3edfe10 c3edfe04
c00a433c
fe00: c00a3f90 c3edfe28 c3edfe14 c0069dc4 c00a4290 c0319b60 00000001
c3edfe40
fe20: c3edfe2c c006a8a4 c0069d80 0bd5b0ff c0319b60 c3edfe88 c3edfe44
c0071524
fe40: c006a89c 00000001 c3d3d000 00000001 00000001 00000001 40136000
c0319b60
fe60: 00000000 00001000 00000800 c3d01738 40136000 000004d8 c3edb780
c3edfecc
fe80: c3edfe8c c0072acc c007117c 00000001 00000001 00000000 c3d3d000
c3d01738
fea0: c3c5f800 ffffffff c3d01738 c3c5f800 c3edb7b8 c3edb780 c3edffb0
40136000
fec0: c3edff04 c3edfed0 c0025be0 c0072834 c0151c64 c014c444 00000817
ffffffff
fee0: c0258638 00000817 c3edffb0 40136000 00000000 4012f000 c3edffac
c3edff08
ff00: c00201dc c0025b08 00000083 00008520 00000083 4012f000 c3edff44
c025cb4c
ff20: 00000083 c3c12600 00000000 00008520 c3ede000 4012f000 c3edff60
c3edff48
ff40: c005fe38 c005ef6c 00000000 c025cb4c 00000084 c3edff7c c3edff64
c0028bb4
ff60: c005fd28 c025b17c 0000000d c027abb8 c3edff8c c3edff80 c0028c38
c0028b84
ff80: c3edffac c3edff90 c0020048 ffffffff 000086b8 000086c4 00000001
00008520
ffa0: 00000000 c3edffb0 c00209c0 c00201b0 40135000 ffffffff 000742f8
40136000
ffc0: becdced4 000086b8 000086c4 00000001 00008520 00000000 4012f000
becdcea8
ffe0: 40089810 becdcd6c 00008670 40089838 20000010 ffffffff ffffffff
ffffffff
Backtrace:
[<c002416c>] (__bug+0x0/0x2c) from [<c010fce4>]
(radix_tree_tag_set+0xd8/0x12c)
[<c010fc0c>] (radix_tree_tag_set+0x0/0x12c) from [<c00a40d8>]
(__set_page_dirty+0x158/0x18c)
[<c00a3f80>] (__set_page_dirty+0x0/0x18c) from [<c00a433c>]
(__set_page_dirty_buffers+0xbc/0xd0)
r6:c3d01738 r5:00000001 r4:c0319b60
[<c00a4280>] (__set_page_dirty_buffers+0x0/0xd0) from [<c0069dc4>]
(set_page_dirty+0x54/0xdc)
[<c0069d70>] (set_page_dirty+0x0/0xdc) from [<c006a8a4>]
(set_page_dirty_balance+0x18/0x64)
r5:00000001 r4:c0319b60
[<c006a88c>] (set_page_dirty_balance+0x0/0x64) from [<c0071524>]
(__do_fault+0x3b8/0x3f0)
r5:c0319b60 r4:0bd5b0ff
[<c007116c>] (__do_fault+0x0/0x3f0) from [<c0072acc>]
(handle_mm_fault+0x2a8/0x3bc)
[<c0072824>] (handle_mm_fault+0x0/0x3bc) from [<c0025be0>]
(do_page_fault+0xe8/0x224)
[<c0025af8>] (do_page_fault+0x0/0x224) from [<c00201dc>]
(do_DataAbort+0x3c/0xa0)
[<c00201a0>] (do_DataAbort+0x0/0xa0) from [<c00209c0>]
(ret_from_exception+0x0/0x10)
Exception stack(0xc3edffb0 to 0xc3edfff8)
ffa0: 40135000 ffffffff 000742f8
40136000
ffc0: becdced4 000086b8 000086c4 00000001 00008520 00000000 4012f000
becdcea8
ffe0: 40089810 becdcd6c 00008670 40089838 20000010 ffffffff
r8:00008520 r7:00000001 r6:000086c4 r5:000086b8 r4:ffffffff
Code: e1a01000 e59f000c eb0061f3 e3a03000 (e5833000)
---[ end trace 7cf699b159b0c732 ]---
Thanks
Wenjie
next prev parent reply other threads:[~2008-08-17 14:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-14 7:02 kernel BUG at lib/radix-tree.c:473! Ian Campbell
2008-08-14 10:41 ` Peter Zijlstra
2008-08-14 13:06 ` Hugh Dickins
2008-08-14 14:56 ` Ian Campbell
2008-08-14 17:42 ` Hugh Dickins
2008-08-14 17:38 ` Jeremy Fitzhardinge
2008-08-14 19:33 ` Jeremy Fitzhardinge
2008-08-14 21:03 ` Hugh Dickins
2008-08-14 22:04 ` Jeremy Fitzhardinge
2008-08-14 22:48 ` Markus Armbruster
2008-08-17 12:09 ` Jaya Kumar
2008-08-17 14:00 ` zhang wenjie [this message]
2008-08-14 23:13 ` Johannes Weiner
2008-08-15 0:00 ` Hugh Dickins
2008-08-17 16:19 ` Ian Campbell
2008-08-18 1:32 ` Nick Piggin
2008-08-18 7:54 ` Ian Campbell
2008-08-18 8:04 ` Peter Zijlstra
2008-08-18 8:05 ` Nick Piggin
2008-08-18 8:22 ` Jaya Kumar
-- strict thread matches above, loose matches on Subject: below --
2008-08-17 3:37 zhang wenjie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48A82F12.70205@vip.sina.com \
--to=zwjsq@vip.sina.com \
--cc=a.p.zijlstra@chello.nl \
--cc=armbru@redhat.com \
--cc=hugh@veritas.com \
--cc=ijc@hellion.org.uk \
--cc=jayakumar.lkml@gmail.com \
--cc=jeremy@goop.org \
--cc=kel@otaku42.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox