[2.6.27-rc4-git5] ipv4: sysctl fixes causes "cannot open /proc/sys/net/ipv4/route/flush"

[Rufus & Azrael <rufus-azrael@numericable.fr>]

[-- Attachment #1: Type: text/plain, Size: 347 bytes --]

Hi Al and David,


After building the fresh 2.6.27-rc4-git5 kernel with your patch in 
commit 2f4520d35d89ca6c5cd129c38e3b11f0283b7d1b, I have this error on boot :

> Cannot open "/proc/sys/net/ipv4/route/flush"
but networking works fine.

Do I modify something in my sysctl.conf file ? (see attached).

Thanks for your explanations,

Regards.




[-- Attachment #2: sysctl.conf --]
[-- Type: text/plain, Size: 1569 bytes --]

# /etc/sysctl.conf
#
# For more information on how this file works, please see
# the manpages sysctl(8) and sysctl.conf(5).
#
# In order for this file to work properly, you must first
# enable 'Sysctl support' in the kernel.
#
# Look in /proc/sys/ for all the things you can setup.
#

# Disables packet forwarding
net.ipv4.ip_forward = 0
# Disables IP dynaddr
#net.ipv4.ip_dynaddr = 0
# Disable ECN
#net.ipv4.tcp_ecn = 0
# Enables source route verification
net.ipv4.conf.default.rp_filter = 1
# Enable reverse path
net.ipv4.conf.all.rp_filter = 1

# Enable SYN cookies (yum!)
# http://cr.yp.to/syncookies.html
net.ipv4.tcp_syncookies = 1

# Disable source route
net.ipv4.conf.all.accept_source_route = 0
#net.ipv4.conf.default.accept_source_route = 0

# Disable redirects
net.ipv4.conf.all.accept_redirects = 0
#net.ipv4.conf.default.accept_redirects = 0

# Disable secure redirects
net.ipv4.conf.all.secure_redirects = 0
#net.ipv4.conf.default.secure_redirects = 0

# Ignore ICMP broadcasts
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_echo_ignore_all = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1

# Disables the magic-sysrq key
#kernel.sysrq = 0
# When the kernel panics, automatically reboot in 3 seconds
#kernel.panic = 3
# Allow for more PIDs (cool factor!); may break some programs
#kernel.pid_max = 999999

# You should compile nfsd into the kernel or add it
# to modules.autoload for this to work properly
# TCP Port for lock manager
#fs.nfs.nlm_tcpport = 0
# UDP Port for lock manager
#fs.nfs.nlm_udpport = 0
net.ipv4.conf.all.log_martians = 1