From: "Steven A. Falco" <sfalco@harris.com>
To: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>,
alessandro.zummo@towertech.it, rtc-linux@googlegroups.com,
will.newton@gmail.com, linux-kernel@vger.kernel.org
Subject: Re: [rtc-linux] Re: [RFC] Driver for Real Time Clock chip ST M41T65
Date: Wed, 27 Aug 2008 13:22:05 -0400 [thread overview]
Message-ID: <48B58D3D.6030808@harris.com> (raw)
In-Reply-To: <Pine.LNX.4.55.0808271717110.5930@cliff.in.clinika.pl>
Add support for M41T65 Real Time Clock chip
Signed-off-by: Steven A. Falco <sfalco@harris.com>
---
Fair enough. Here is a sorted version.
drivers/rtc/Kconfig | 14 +++++++-------
drivers/rtc/rtc-m41t80.c | 43 +++++++++++++++++++++++++++++++++----------
2 files changed, 40 insertions(+), 17 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4949dc4..c7586bc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -220,22 +220,22 @@ config RTC_DRV_PCF8583
will be called rtc-pcf8583.
config RTC_DRV_M41T80
- tristate "ST M41T80/81/82/83/84/85/87"
+ tristate "ST M41T65/M41T80/81/82/83/84/85/87"
help
- If you say Y here you will get support for the
- ST M41T80 RTC chips series. Currently following chips are
- supported: M41T80, M41T81, M41T82, M41T83, M41ST84, M41ST85
- and M41ST87.
+ If you say Y here you will get support for the ST M41T60
+ and M41T80 RTC chips series. Currently, the following chips are
+ supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+ M41ST85, and M41ST87.
This driver can also be built as a module. If so, the module
will be called rtc-m41t80.
config RTC_DRV_M41T80_WDT
- bool "ST M41T80 series RTC watchdog timer"
+ bool "ST M41T65/M41T80 series RTC watchdog timer"
depends on RTC_DRV_M41T80
help
If you say Y here you will get support for the
- watchdog timer in ST M41T80 RTC chips series.
+ watchdog timer in the ST M41T60 and M41T80 RTC chips series.
config RTC_DRV_TWL92330
boolean "TI TWL92330/Menelaus"
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index a3e0880..7eb4e05 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -55,21 +55,27 @@
#define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
#define M41T80_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */
#define M41T80_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */
+#define M41T80_WATCHDOG_RB2 (1 << 7) /* RB: Watchdog resolution */
+#define M41T80_WATCHDOG_RB1 (1 << 1) /* RB: Watchdog resolution */
+#define M41T80_WATCHDOG_RB0 (1 << 0) /* RB: Watchdog resolution */
-#define M41T80_FEATURE_HT (1 << 0)
-#define M41T80_FEATURE_BL (1 << 1)
+#define M41T80_FEATURE_HT (1 << 0) /* Halt feature */
+#define M41T80_FEATURE_BL (1 << 1) /* Battery low indicator */
+#define M41T80_FEATURE_SQ (1 << 2) /* Squarewave feature */
+#define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */
#define DRV_VERSION "0.05"
static const struct i2c_device_id m41t80_id[] = {
- { "m41t80", 0 },
- { "m41t81", M41T80_FEATURE_HT },
- { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
+ { "m41t80", M41T80_FEATURE_SQ },
+ { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
+ { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ }
};
MODULE_DEVICE_TABLE(i2c, m41t80_id);
@@ -385,8 +391,12 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
+ struct m41t80_data *clientdata = i2c_get_clientdata(client);
int val;
+ if (!(clientdata->features & M41T80_FEATURE_SQ))
+ return -EINVAL;
+
val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
if (val < 0)
return -EIO;
@@ -407,9 +417,13 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
+ struct m41t80_data *clientdata = i2c_get_clientdata(client);
int almon, sqw;
int val = simple_strtoul(buf, NULL, 0);
+ if (!(clientdata->features & M41T80_FEATURE_SQ))
+ return -EINVAL;
+
if (val) {
if (!is_power_of_2(val))
return -EINVAL;
@@ -498,6 +512,8 @@ static void wdt_ping(void)
.buf = i2c_data,
},
};
+ struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
+
i2c_data[0] = 0x09; /* watchdog register */
if (wdt_margin > 31)
@@ -508,6 +524,13 @@ static void wdt_ping(void)
*/
i2c_data[1] = wdt_margin<<2 | 0x82;
+ /*
+ * M41T65 has three bits for watchdog resolution. Don't set bit 7, as
+ * that would be an invalid resolution.
+ */
+ if (clientdata->features & M41T80_FEATURE_WD)
+ i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
+
i2c_transfer(save_client->adapter, msgs1, 1);
}
--
1.5.5.1
next prev parent reply other threads:[~2008-08-27 17:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-25 17:27 [RFC] Driver for Real Time Clock chip ST M41T65 Steven A. Falco
2008-08-26 8:30 ` Will Newton
2008-08-26 13:55 ` Steven A. Falco
2008-08-26 14:00 ` Will Newton
2008-08-26 14:13 ` [rtc-linux] " Alessandro Zummo
2008-08-26 14:39 ` Steven A. Falco
2008-08-27 12:35 ` Atsushi Nemoto
2008-08-27 13:32 ` Steven A. Falco
2008-08-27 13:53 ` Atsushi Nemoto
2008-08-27 16:25 ` Maciej W. Rozycki
2008-08-27 17:22 ` Steven A. Falco [this message]
2008-08-27 19:27 ` Maciej W. Rozycki
2008-08-27 19:44 ` Alessandro Zummo
2008-08-26 14:42 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48B58D3D.6030808@harris.com \
--to=sfalco@harris.com \
--cc=alessandro.zummo@towertech.it \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@linux-mips.org \
--cc=rtc-linux@googlegroups.com \
--cc=will.newton@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox