From: Martin Doucha <next_ghost@quick.cz>
To: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Linux Kernel list <linux-kernel@vger.kernel.org>,
matthieu castet <castet.matthieu@free.fr>
Subject: Re: ACPI PnP on Intel MU440EX
Date: Sun, 14 Sep 2008 21:28:16 +0200 [thread overview]
Message-ID: <48CD65D0.9090202@quick.cz> (raw)
In-Reply-To: <200809091034.46729.bjorn.helgaas@hp.com>
[-- Attachment #1: Type: text/plain, Size: 835 bytes --]
Bjorn Helgaas wrote:
> Thanks very much for the report. This sounds like it could be a
> PNPACPI issue, which I am very interested in fixing.
>
> Can you please turn on CONFIG_PNP_DEBUG in your .config and collect
> the complete dmesg log with and without "pnpacpi=off"?
>
> I do have an "lspnp" that works with PNPACPI here:
> http://kernel.org/pub/linux/kernel/people/helgaas/pnputils-0.1.tar.bz2
> but it's not widely used. The debug information from the config
> option above is usually more useful.
>
> Bjorn
I'm sorry it took me so long, here's the output of lspnp -vvv from both
PNPBIOS and ACPI PnP (same kernel, the only difference is pnpacpi=off
boot argument). I can't find any mention of my parallel port in ACPI PnP
output but it's the last listed device (00:15 PNP0400) in PNPBIOS output.
Regards,
Martin Doucha
[-- Attachment #2: pnpacpi.out --]
[-- Type: text/plain, Size: 2695 bytes --]
00:00 PNP0a03 (unknown)
state = active
allocated resources:
io 0xcf8-0xcff
00:01 PNP0303 (unknown)
state = active
allocated resources:
io 0x60-0x60
io 0x64-0x64
irq 1
00:02 PNP0f13 (unknown)
state = active
allocated resources:
irq 12
00:03 PNP0201 (unknown)
state = active
allocated resources:
io 0x0-0xf
io 0x80-0x91
io 0x94-0x9f
io 0xc0-0xdf
io 0x40b-0x40b
io 0x410-0x43f
io 0x481-0x483
io 0x487-0x487
io 0x489-0x489
io 0x4d6-0x4d6
dma 4
00:04 PNP0b00 (unknown)
state = active
allocated resources:
io 0x70-0x71
irq 8
00:05 PNP0c04 (unknown)
state = active
allocated resources:
io 0xf0-0xff
irq 13
00:06 PNP0800 (unknown)
state = active
allocated resources:
io 0x61-0x61
00:07 PNP0c02 (unknown)
state = active
allocated resources:
io 0x7000-0x700f
io 0x8000-0x803f
00:08 PNP0700 (unknown)
state = active
allocated resources:
io 0x3f0-0x3f5
io 0x3f7-0x3f7
irq 6
dma 2
possible resources:
Dependent: 01 - Priority preferred
port 0x3f0-0x3f0, align 0x0, size 0x6, 16-bit address decoding
port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding
irq 6 High-Edge
dma 2 8-bit compatible
00:09 PNP0501 (unknown)
state = active
allocated resources:
io 0x3f8-0x3ff
irq 4
possible resources:
Dependent: 01 - Priority preferred
port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 02 - Priority preferred
port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 03 - Priority preferred
port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 04 - Priority preferred
port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 05 - Priority functional
port 0x100-0x3f8, align 0x7, size 0x8, 16-bit address decoding
irq 1,3,4,5,6,7,8,10,11,12,13,14,15 High-Edge
00:0a PNP8294 (unknown)
state = disabled
possible resources:
Dependent: 01 - Priority preferred
port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 02 - Priority preferred
port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 03 - Priority preferred
port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 04 - Priority preferred
port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 05 - Priority functional
port 0x100-0x3f8, align 0x7, size 0x8, 16-bit address decoding
irq 1,3,4,5,6,7,8,10,11,12,13,14,15 High-Edge
[-- Attachment #3: pnpbios.out --]
[-- Type: text/plain, Size: 3966 bytes --]
00:00 PNP0c02 (unknown)
state = active
allocated resources:
io 0x370-0x371
io 0xea-0xeb
mem 0xfffc0000-0xffffffff
00:01 PNP0c01 (unknown)
state = active
allocated resources:
mem 0x0-0x9ffff
mem 0xe4000-0xfffff
mem 0x100000-0x5ffffff
mem 0xfff80000-0xfffbffff
00:02 PNP0200 (unknown)
state = active
allocated resources:
io 0x0-0xf
io 0x81-0x8f
io 0xc0-0xdf
dma 4
00:03 PNP0000 (unknown)
state = active
allocated resources:
io 0x20-0x21
io 0xa0-0xa1
irq 2
00:04 PNP0100 (unknown)
state = active
allocated resources:
io 0x40-0x43
irq 0
00:05 PNP0b00 (unknown)
state = active
allocated resources:
io 0x70-0x71
irq 8
00:06 PNP0303 (unknown)
state = active
allocated resources:
io 0x60-0x60
io 0x64-0x64
irq 1
00:07 PNP0c04 (unknown)
state = active
allocated resources:
io 0xf0-0xff
irq 13
00:08 PNP0800 (unknown)
state = active
allocated resources:
io 0x61-0x61
00:09 PNP0a03 (unknown)
state = active
allocated resources:
io 0xcf8-0xcff
00:0a PNP0c02 (unknown)
state = active
allocated resources:
io 0x4d0-0x4d1
io 0x8000-0x803f
io 0x7000-0x700f
00:0b PNP0c02 (unknown)
state = active
allocated resources:
mem 0xe0000-0xe3fff
00:0c PNP0c02 (unknown)
state = disabled
00:0d PNP0f13 (unknown)
state = active
allocated resources:
irq 12
possible resources:
irq 12 High-Edge
00:0e PNP0501 (unknown)
state = active
allocated resources:
io 0x3f8-0x3ff
irq 4
possible resources:
Dependent: 01 - Priority acceptable
port 0x3f8-0x3f8, align 0x7, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 02 - Priority acceptable
port 0x2f8-0x2f8, align 0x7, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 03 - Priority acceptable
port 0x3e8-0x3e8, align 0x7, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 04 - Priority acceptable
port 0x2e8-0x2e8, align 0x7, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 05 - Priority acceptable
port 0x3f8-0x3f8, align 0x7, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 06 - Priority acceptable
port 0x2f8-0x2f8, align 0x7, size 0x8, 16-bit address decoding
irq 4 High-Edge
Dependent: 07 - Priority acceptable
port 0x3e8-0x3e8, align 0x7, size 0x8, 16-bit address decoding
irq 3 High-Edge
Dependent: 08 - Priority acceptable
port 0x2e8-0x2e8, align 0x7, size 0x8, 16-bit address decoding
irq 4 High-Edge
00:11 PNP0700 (unknown)
state = active
allocated resources:
io 0x3f0-0x3f5
io 0x3f7-0x3f7
irq 6
dma 2
possible resources:
Dependent: 01 - Priority acceptable
port 0x3f0-0x3f0, align 0x7, size 0x6, 16-bit address decoding
port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding
irq 6 High-Edge
dma 2 8-bit compatible
Dependent: 02 - Priority acceptable
port 0x370-0x370, align 0x7, size 0x6, 16-bit address decoding
port 0x377-0x377, align 0x0, size 0x1, 16-bit address decoding
irq 6 High-Edge
dma 2 8-bit compatible
00:15 PNP0400 (unknown)
state = active
allocated resources:
io 0x378-0x37f
irq 7
possible resources:
Dependent: 01 - Priority acceptable
port 0x378-0x378, align 0x7, size 0x8, 16-bit address decoding
irq 7 High-Edge
Dependent: 02 - Priority acceptable
port 0x278-0x278, align 0x7, size 0x8, 16-bit address decoding
irq 5 High-Edge
Dependent: 03 - Priority acceptable
port 0x228-0x228, align 0x7, size 0x8, 16-bit address decoding
irq 7 High-Edge
Dependent: 04 - Priority acceptable
port 0x378-0x378, align 0x7, size 0x8, 16-bit address decoding
irq 5 High-Edge
Dependent: 05 - Priority acceptable
port 0x278-0x278, align 0x7, size 0x8, 16-bit address decoding
irq 7 High-Edge
Dependent: 06 - Priority acceptable
port 0x228-0x228, align 0x7, size 0x8, 16-bit address decoding
irq 5 High-Edge
next prev parent reply other threads:[~2008-09-14 19:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-31 13:22 ACPI PnP on Intel MU440EX Martin Doucha
2008-09-09 16:34 ` Bjorn Helgaas
2008-09-14 19:28 ` Martin Doucha [this message]
2008-09-17 5:39 ` Bjorn Helgaas
2008-09-20 22:59 ` [Bug 11603] " Bjorn Helgaas
2008-09-22 23:01 ` Bjorn Helgaas
2008-09-23 21:29 ` matthieu castet
2008-09-24 23:05 ` Bjorn Helgaas
2008-09-25 18:52 ` matthieu castet
2008-09-25 19:53 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48CD65D0.9090202@quick.cz \
--to=next_ghost@quick.cz \
--cc=bjorn.helgaas@hp.com \
--cc=castet.matthieu@free.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox