* 2.6.27 gspca driver fails with Trust WB-1400T
@ 2008-10-13 20:19 Patrizio Bassi
2008-10-13 21:21 ` Simon Holm Thøgersen
0 siblings, 1 reply; 4+ messages in thread
From: Patrizio Bassi @ 2008-10-13 20:19 UTC (permalink / raw)
To: Kernel,
Hi
i have a Trust 1400T perfectly working on 2.6.26 using external module
(media-video/gspcav1-20071224 is the gentoo version so it's that day
snapshot.)
Upgrading to 2.6.27 kernel, using integrated kernel driver
i get:
gspca: main v2.2.0
registered
usbcore: registered new interface driver
conex
conex:
registered
usbcore: registered new interface driver
etoms
etoms:
registered
usbcore: registered new interface driver
mars
mars:
registered
usbcore: registered new interface driver
ov519
ov519:
registered
usbcore: registered new interface driver
pac207
pac207:
registered
usbcore: registered new interface driver
pac7311
pac7311:
registered
usbcore: registered new interface driver
sonixb
sonixb:
registered
usbcore: registered new interface driver
sonixj
sonixj:
registered
usbcore: registered new interface driver
spca500
spca500:
registered
usbcore: registered new interface driver
spca501
spca501:
registered
usbcore: registered new interface driver
spca505
spca505:
registered
usbcore: registered new interface driver
spca506
spca506:
registered
usbcore: registered new interface driver
spca508
spca508:
registered
usbcore: registered new interface driver
spca561
spca561:
registered
usbcore: registered new interface driver
sunplus
sunplus:
registered
usbcore: registered new interface driver
stk014
stk014:
registered
usbcore: registered new interface driver
t613
t613:
registered
usbcore: registered new interface driver
tv8532
tv8532:
registered
usbcore: registered new interface driver
vc032x
vc032x:
registered
usbcore: registered new interface driver
zc3xx
zc3xx: registered
gspca: probing
093a:2468
pac207: Pixart Sensor ID 0x27 Chips ID
0x08
pac207: Pixart PAC207BCA Image Processor and Control Chip detected
(vid/pid 0x093A:0x2468)
gspca: probe ok
i have node device created, but picture is totally corrupted, with skype
(sorry!) i have a green and black window,
with mplayer or kopete i have a black one, while before with old driver
it was working perfectly.
Any hints?
lsusb
Bus 002 Device 002: ID 093a:2468 Pixart Imaging, Inc. Easy Snap Snake
Eye WebCam
Here i read my device works, but it's not my case.
https://fedoraproject.org/wiki/Features/BetterWebcamSupport
i'm running a core2 in 64bit mode.
Please CC me i'm not subscribed
---
Patrizio Bassi
www.patriziobassi.it
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.27 gspca driver fails with Trust WB-1400T
2008-10-13 20:19 2.6.27 gspca driver fails with Trust WB-1400T Patrizio Bassi
@ 2008-10-13 21:21 ` Simon Holm Thøgersen
2008-10-14 7:21 ` Patrizio Bassi
0 siblings, 1 reply; 4+ messages in thread
From: Simon Holm Thøgersen @ 2008-10-13 21:21 UTC (permalink / raw)
To: patrizio.bassi; +Cc: Kernel,
man, 13 10 2008 kl. 22:19 +0200, skrev Patrizio Bassi:
> Hi
>
> i have a Trust 1400T perfectly working on 2.6.26 using external module
> (media-video/gspcav1-20071224 is the gentoo version so it's that day
> snapshot.)
>
> Upgrading to 2.6.27 kernel, using integrated kernel driver
>
Does the following text explain it (imagine the text being at the front
page of [2])?
"Historically, there has been a number of different projects ([1], ...),
providing v4l drivers outside of the mainline Linux kernel. If you are
migrating from drivers by such projects, you might need to know a few
things. The drivers provided by this project do not do various color
conversion routines in the kernel, but in a userspace library that we
also provide [3].
This means that programs that use v4l and v4l2 must either be
- able to do the necessary color conversion themselves,
- link against our userspace library that provides these
conversions, or
- be loaded using an appropriately set LD_PRELOAD environment
variable."
[1] http://mxhaard.free.fr/
[2] http://linuxtv.org/v4lwiki/index.php/Main_Page
[3] http://linuxtv.org/hg/~hgoede/v4l-dvb
Simon Holm Thøgersen
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.27 gspca driver fails with Trust WB-1400T
2008-10-13 21:21 ` Simon Holm Thøgersen
@ 2008-10-14 7:21 ` Patrizio Bassi
2008-10-15 13:09 ` Patrizio Bassi
0 siblings, 1 reply; 4+ messages in thread
From: Patrizio Bassi @ 2008-10-14 7:21 UTC (permalink / raw)
To: Simon Holm Thøgersen; +Cc: Kernel,
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 1528 bytes --]
2008/10/13 Simon Holm Thøgersen <odie@cs.aau.dk>>> man, 13 10 2008 kl. 22:19 +0200, skrev Patrizio Bassi:> > Hi> >> > i have a Trust 1400T perfectly working on 2.6.26 using external module> > (media-video/gspcav1-20071224 is the gentoo version so it's that day> > snapshot.)> >> > Upgrading to 2.6.27 kernel, using integrated kernel driver> >> Does the following text explain it (imagine the text being at the front> page of [2])?>> "Historically, there has been a number of different projects ([1], ...),> providing v4l drivers outside of the mainline Linux kernel. If you are> migrating from drivers by such projects, you might need to know a few> things. The drivers provided by this project do not do various color> conversion routines in the kernel, but in a userspace library that we> also provide [3].>> This means that programs that use v4l and v4l2 must either be> - able to do the necessary color conversion themselves,> - link against our userspace library that provides these> conversions, or> - be loaded using an appropriately set LD_PRELOAD environment> variable.">> [1] http://mxhaard.free.fr/> [2] http://linuxtv.org/v4lwiki/index.php/Main_Page> [3] http://linuxtv.org/hg/~hgoede/v4l-dvb>>> Simon Holm Thøgersen>
ok, it sounds i need to read some wikis...i'll come back to you wheni'm done with the result
--Patrizio Bassiwww.patriziobassi.itÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.27 gspca driver fails with Trust WB-1400T
2008-10-14 7:21 ` Patrizio Bassi
@ 2008-10-15 13:09 ` Patrizio Bassi
0 siblings, 0 replies; 4+ messages in thread
From: Patrizio Bassi @ 2008-10-15 13:09 UTC (permalink / raw)
To: Simon Holm Thøgersen; +Cc: Kernel,
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 1966 bytes --]
2008/10/14 Patrizio Bassi <patrizio.bassi@gmail.com>>> 2008/10/13 Simon Holm Thøgersen <odie@cs.aau.dk>> >> > man, 13 10 2008 kl. 22:19 +0200, skrev Patrizio Bassi:> > > Hi> > >> > > i have a Trust 1400T perfectly working on 2.6.26 using external module> > > (media-video/gspcav1-20071224 is the gentoo version so it's that day> > > snapshot.)> > >> > > Upgrading to 2.6.27 kernel, using integrated kernel driver> > >> > Does the following text explain it (imagine the text being at the front> > page of [2])?> >> > "Historically, there has been a number of different projects ([1], ...),> > providing v4l drivers outside of the mainline Linux kernel. If you are> > migrating from drivers by such projects, you might need to know a few> > things. The drivers provided by this project do not do various color> > conversion routines in the kernel, but in a userspace library that we> > also provide [3].> >> > This means that programs that use v4l and v4l2 must either be> > - able to do the necessary color conversion themselves,> > - link against our userspace library that provides these> > conversions, or> > - be loaded using an appropriately set LD_PRELOAD environment> > variable."> >> > [1] http://mxhaard.free.fr/> > [2] http://linuxtv.org/v4lwiki/index.php/Main_Page> > [3] http://linuxtv.org/hg/~hgoede/v4l-dvb> >> >> > Simon Holm Thøgersen> >>> ok, it sounds i need to read some wikis...i'll come back to you when> i'm done with the result>
Hi Simon,
with the v4llib it looks much better, even if colors are not real as before.I think i need to tune it a little bit.
In the driver homepage it seems they suggest to continue using the olddriver with kernelspace decode for desktop or fast machines, butunfortunatly it doesn't even compile with 2.6.27.
--Patrizio Bassiwww.patriziobassi.itÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-10-15 13:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-13 20:19 2.6.27 gspca driver fails with Trust WB-1400T Patrizio Bassi
2008-10-13 21:21 ` Simon Holm Thøgersen
2008-10-14 7:21 ` Patrizio Bassi
2008-10-15 13:09 ` Patrizio Bassi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox