[PATCH 0/2] soundwire: Intel: support more then 1 sdw bus clock frequency

[PATCH 0/2] soundwire: Intel: support more then 1 sdw bus clock frequency

[Bard Liao]

This series set frame shape and divider based on actual clk freq to
support dynamic clock change. The revert the commit that limits Intel
platform to use fixed clock frequency.

Bard Liao (2):
  soundwire: cadence_master: set frame shape and divider based on actual
    clk freq
  Revert "soundwire: intel_auxdevice: start the bus at default
    frequency"

 drivers/soundwire/cadence_master.c  | 22 +++++++++++++++++++---
 drivers/soundwire/intel_auxdevice.c | 21 ---------------------
 2 files changed, 19 insertions(+), 24 deletions(-)

-- 
2.43.0

[PATCH 1/2] soundwire: cadence_master: set frame shape and divider based on actual clk freq

[Bard Liao]

Frame shape and curr_dr_freq could be updated by sdw_compute_bus_params().
Peripherals will set curr_dr_freq as their frequency. Managers
should do the same. Then update frame shape according to the actual
bus frequency.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
 drivers/soundwire/cadence_master.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 35b28320f466..350c5fe927ed 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -1343,7 +1343,7 @@ static u32 cdns_set_initial_frame_shape(int n_rows, int n_cols)
 	return val;
 }
 
-static void cdns_init_clock_ctrl(struct sdw_cdns *cdns)
+static int cdns_init_clock_ctrl(struct sdw_cdns *cdns)
 {
 	struct sdw_bus *bus = &cdns->bus;
 	struct sdw_master_prop *prop = &bus->prop;
@@ -1357,14 +1357,25 @@ static void cdns_init_clock_ctrl(struct sdw_cdns *cdns)
 		prop->default_row,
 		prop->default_col);
 
+	if (!prop->default_frame_rate || !prop->default_row) {
+		dev_err(cdns->dev, "Default frame_rate %d or row %d is invalid\n",
+			prop->default_frame_rate, prop->default_row);
+		return -EINVAL;
+	}
+
 	/* Set clock divider */
-	divider	= (prop->mclk_freq / prop->max_clk_freq) - 1;
+	divider	= (prop->mclk_freq * SDW_DOUBLE_RATE_FACTOR /
+		bus->params.curr_dr_freq) - 1;
 
 	cdns_updatel(cdns, CDNS_MCP_CLK_CTRL0,
 		     CDNS_MCP_CLK_MCLKD_MASK, divider);
 	cdns_updatel(cdns, CDNS_MCP_CLK_CTRL1,
 		     CDNS_MCP_CLK_MCLKD_MASK, divider);
 
+	/* Set frame shape base on the actual bus frequency. */
+	prop->default_col = bus->params.curr_dr_freq /
+			    prop->default_frame_rate / prop->default_row;
+
 	/*
 	 * Frame shape changes after initialization have to be done
 	 * with the bank switch mechanism
@@ -1377,6 +1388,8 @@ static void cdns_init_clock_ctrl(struct sdw_cdns *cdns)
 	ssp_interval = prop->default_frame_rate / SDW_CADENCE_GSYNC_HZ;
 	cdns_writel(cdns, CDNS_MCP_SSP_CTRL0, ssp_interval);
 	cdns_writel(cdns, CDNS_MCP_SSP_CTRL1, ssp_interval);
+
+	return 0;
 }
 
 /**
@@ -1410,9 +1423,12 @@ EXPORT_SYMBOL(sdw_cdns_soft_reset);
  */
 int sdw_cdns_init(struct sdw_cdns *cdns)
 {
+	int ret;
 	u32 val;
 
-	cdns_init_clock_ctrl(cdns);
+	ret = cdns_init_clock_ctrl(cdns);
+	if (ret)
+		return ret;
 
 	sdw_cdns_check_self_clearing_bits(cdns, __func__, false, 0);
 
-- 
2.43.0

[PATCH 2/2] Revert "soundwire: intel_auxdevice: start the bus at default frequency"

[Bard Liao]

Now, we can support more than 1 soundwire bus clock frequency.

This reverts commit c326356188f1dc2d7a2c55b30dac6a8b76087bc6.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
 drivers/soundwire/intel_auxdevice.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c
index b34b897400fc..5ea6399e6c9b 100644
--- a/drivers/soundwire/intel_auxdevice.c
+++ b/drivers/soundwire/intel_auxdevice.c
@@ -243,30 +243,9 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
 
 static int intel_prop_read(struct sdw_bus *bus)
 {
-	struct sdw_master_prop *prop;
-
 	/* Initialize with default handler to read all DisCo properties */
 	sdw_master_read_prop(bus);
 
-	/*
-	 * Only one bus frequency is supported so far, filter
-	 * frequencies reported in the DSDT
-	 */
-	prop = &bus->prop;
-	if (prop->clk_freq && prop->num_clk_freq > 1) {
-		unsigned int default_bus_frequency;
-
-		default_bus_frequency =
-			prop->default_frame_rate *
-			prop->default_row *
-			prop->default_col /
-			SDW_DOUBLE_RATE_FACTOR;
-
-		prop->num_clk_freq = 1;
-		prop->clk_freq[0] = default_bus_frequency;
-		prop->max_clk_freq = default_bus_frequency;
-	}
-
 	/* read Intel-specific properties */
 	sdw_master_read_intel_prop(bus);
 
-- 
2.43.0

Re: [PATCH 2/2] Revert "soundwire: intel_auxdevice: start the bus at default frequency"

[Vinod Koul]

On 05-02-25, 15:42, Bard Liao wrote:
> Now, we can support more than 1 soundwire bus clock frequency.
> 
> This reverts commit c326356188f1dc2d7a2c55b30dac6a8b76087bc6.

Pls use full patch title and not just the sha

> 
> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
> ---
>  drivers/soundwire/intel_auxdevice.c | 21 ---------------------
>  1 file changed, 21 deletions(-)
> 
> diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c
> index b34b897400fc..5ea6399e6c9b 100644
> --- a/drivers/soundwire/intel_auxdevice.c
> +++ b/drivers/soundwire/intel_auxdevice.c
> @@ -243,30 +243,9 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
>  
>  static int intel_prop_read(struct sdw_bus *bus)
>  {
> -	struct sdw_master_prop *prop;
> -
>  	/* Initialize with default handler to read all DisCo properties */
>  	sdw_master_read_prop(bus);
>  
> -	/*
> -	 * Only one bus frequency is supported so far, filter
> -	 * frequencies reported in the DSDT
> -	 */
> -	prop = &bus->prop;
> -	if (prop->clk_freq && prop->num_clk_freq > 1) {
> -		unsigned int default_bus_frequency;
> -
> -		default_bus_frequency =
> -			prop->default_frame_rate *
> -			prop->default_row *
> -			prop->default_col /
> -			SDW_DOUBLE_RATE_FACTOR;
> -
> -		prop->num_clk_freq = 1;
> -		prop->clk_freq[0] = default_bus_frequency;
> -		prop->max_clk_freq = default_bus_frequency;
> -	}
> -
>  	/* read Intel-specific properties */
>  	sdw_master_read_intel_prop(bus);
>  
> -- 
> 2.43.0

-- 
~Vinod

Re: [PATCH 0/2] soundwire: Intel: support more then 1 sdw bus clock frequency

[Pierre-Louis Bossart]

On 2/5/25 01:42, Bard Liao wrote:
> This series set frame shape and divider based on actual clk freq to
> support dynamic clock change. The revert the commit that limits Intel
> platform to use fixed clock frequency.
> 
> Bard Liao (2):
>   soundwire: cadence_master: set frame shape and divider based on actual
>     clk freq
>   Revert "soundwire: intel_auxdevice: start the bus at default
>     frequency"

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>

>  drivers/soundwire/cadence_master.c  | 22 +++++++++++++++++++---
>  drivers/soundwire/intel_auxdevice.c | 21 ---------------------
>  2 files changed, 19 insertions(+), 24 deletions(-)
> 

Re: [PATCH 0/2] soundwire: Intel: support more then 1 sdw bus clock frequency

[Vinod Koul]

On Wed, 05 Feb 2025 15:42:30 +0800, Bard Liao wrote:
> This series set frame shape and divider based on actual clk freq to
> support dynamic clock change. The revert the commit that limits Intel
> platform to use fixed clock frequency.
> 
> Bard Liao (2):
>   soundwire: cadence_master: set frame shape and divider based on actual
>     clk freq
>   Revert "soundwire: intel_auxdevice: start the bus at default
>     frequency"
> 
> [...]

Applied, thanks!

[1/2] soundwire: cadence_master: set frame shape and divider based on actual clk freq
      commit: e738d77f78b3ac085dfb51be414e93464abba7ec
[2/2] Revert "soundwire: intel_auxdevice: start the bus at default frequency"
      commit: d38ea972da679f223ae1e761080e37dd8b582bac

Best regards,
-- 
~Vinod