public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Jisheng Zhang <Jisheng.Zhang@synaptics.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Ben Dooks <ben-linux@fluff.org>,
	Jaehoon Chung <jh80.chung@samsung.com>,
	Viresh Kumar <vireshk@kernel.org>,
	Patrice Chotard <patrice.chotard@st.com>
Cc: bcm-kernel-feedback-list@broadcom.com, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails
Date: Fri, 25 May 2018 12:05:58 +0300	[thread overview]
Message-ID: <48df3724-b9ff-ef9c-0583-961fd40f1978@intel.com> (raw)
In-Reply-To: <20180525151509.0270dbe1@xhacker.debian>

On 25/05/18 10:15, Jisheng Zhang wrote:
> I noticed below error msg with sdhci-pxav3 on some berlin platforms:
> 
> [.....] sdhci-pxav3 f7ab0000.sdhci failed to add host
> 
> It is due to getting related vmmc or vqmmc regulator returns
> -EPROBE_DEFER. It doesn't matter at all but it's confusing.
> 
>>From another side, if driver probing fails and the error number isn't
> -EPROBE_DEFER, the core will tell us something as below:
> 
> [.....] sdhci-pxav3: probe of f7ab0000.sdhci failed with error -EXX
> 
> So it's not necessary to emit error msg if sdhci_add_host() fails. And
> some other sdhci host drivers also have this issue, let's fix them
> together.
> 
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-bcm-kona.c | 4 +---
>  drivers/mmc/host/sdhci-pic32.c    | 4 +---
>  drivers/mmc/host/sdhci-pxav2.c    | 4 +---
>  drivers/mmc/host/sdhci-pxav3.c    | 4 +---
>  drivers/mmc/host/sdhci-s3c.c      | 4 +---
>  drivers/mmc/host/sdhci-spear.c    | 4 +---
>  drivers/mmc/host/sdhci-st.c       | 4 +---
>  7 files changed, 7 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
> index 11ca95c60bcf..bdbd4897c0f7 100644
> --- a/drivers/mmc/host/sdhci-bcm-kona.c
> +++ b/drivers/mmc/host/sdhci-bcm-kona.c
> @@ -284,10 +284,8 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
>  	sdhci_bcm_kona_sd_init(host);
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_err(dev, "Failed sdhci_add_host\n");
> +	if (ret)
>  		goto err_reset;
> -	}
>  
>  	/* if device is eMMC, emulate card insert right here */
>  	if (!mmc_card_is_removable(host->mmc)) {
> diff --git a/drivers/mmc/host/sdhci-pic32.c b/drivers/mmc/host/sdhci-pic32.c
> index a6caa49ca25a..a11e6397d4ff 100644
> --- a/drivers/mmc/host/sdhci-pic32.c
> +++ b/drivers/mmc/host/sdhci-pic32.c
> @@ -200,10 +200,8 @@ static int pic32_sdhci_probe(struct platform_device *pdev)
>  	}
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_err(&pdev->dev, "error adding host\n");
> +	if (ret)
>  		goto err_base_clk;
> -	}
>  
>  	dev_info(&pdev->dev, "Successfully added sdhci host\n");
>  	return 0;
> diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
> index 8986f9d9cf98..2c3827f54927 100644
> --- a/drivers/mmc/host/sdhci-pxav2.c
> +++ b/drivers/mmc/host/sdhci-pxav2.c
> @@ -221,10 +221,8 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
>  	host->ops = &pxav2_sdhci_ops;
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to add host\n");
> +	if (ret)
>  		goto disable_clk;
> -	}
>  
>  	return 0;
>  
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index a34434166ca7..b8e96f392428 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -472,10 +472,8 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
>  	pm_suspend_ignore_children(&pdev->dev, 1);
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to add host\n");
> +	if (ret)
>  		goto err_add_host;
> -	}
>  
>  	if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
>  		device_init_wakeup(&pdev->dev, 1);
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index cda83ccb2702..9ef89d00970e 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -655,10 +655,8 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
>  		goto err_req_regs;
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_err(dev, "sdhci_add_host() failed\n");
> +	if (ret)
>  		goto err_req_regs;
> -	}
>  
>  #ifdef CONFIG_PM
>  	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
> diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
> index 14511526a3a8..9247d51f2eed 100644
> --- a/drivers/mmc/host/sdhci-spear.c
> +++ b/drivers/mmc/host/sdhci-spear.c
> @@ -126,10 +126,8 @@ static int sdhci_probe(struct platform_device *pdev)
>  	}
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_dbg(&pdev->dev, "error adding host\n");
> +	if (ret)
>  		goto disable_clk;
> -	}
>  
>  	platform_set_drvdata(pdev, host);
>  
> diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
> index c32daed0d418..8f95647195d9 100644
> --- a/drivers/mmc/host/sdhci-st.c
> +++ b/drivers/mmc/host/sdhci-st.c
> @@ -422,10 +422,8 @@ static int sdhci_st_probe(struct platform_device *pdev)
>  	st_mmcss_cconfig(np, host);
>  
>  	ret = sdhci_add_host(host);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed sdhci_add_host\n");
> +	if (ret)
>  		goto err_out;
> -	}
>  
>  	host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
>  
> 

  reply	other threads:[~2018-05-25  9:07 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25  7:15 [PATCH] mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails Jisheng Zhang
2018-05-25  9:05 ` Adrian Hunter [this message]
2018-05-25 10:18 ` Viresh Kumar
2018-05-25 12:42 ` Patrice CHOTARD
2018-05-28 11:27 ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48df3724-b9ff-ef9c-0583-961fd40f1978@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=Jisheng.Zhang@synaptics.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=ben-linux@fluff.org \
    --cc=f.fainelli@gmail.com \
    --cc=jh80.chung@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=patrice.chotard@st.com \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox