Re: tg3:No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.

Re: tg3:No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.

[Robert Hancock]

Marc Donner wrote:
> Hi @all,
> 
> we have installed a dual port Brodcam Gigabit Ethernet NIC, and get the
> following error in dmesg:
> 
> tg3: eth1 No interrupt was generated using MSI, switching to INTx mode.
> Please report this failure to the PCI maintainer and include system
> chipset information.
> 
> Who is responsible for this error message? We are using Kernel 2.6.21.1
> and the NIC Chipset is a Broadcom BCM5715CKPBG

Please post your full dmesg output from bootup, lspci -vvv output and 
what kind of motherboard or system you're using.

Also it would be useful to test a newer kernel to see if the problem 
still occurs. 2.6.21 is quite old these days.

tg3:No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.

[Marc Donner]

Hi @all,

we have installed a dual port Brodcam Gigabit Ethernet NIC, and get the
following error in dmesg:

tg3: eth1 No interrupt was generated using MSI, switching to INTx mode.
Please report this failure to the PCI maintainer and include system
chipset information.

Who is responsible for this error message? We are using Kernel 2.6.21.1
and the NIC Chipset is a Broadcom BCM5715CKPBG

Regards,

Marc

Re: tg3:No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.

[David Miller]

From: Marc Donner <donner@dbd-breitband.de>
Date: Tue, 28 Oct 2008 11:58:30 +0100

Please report networking problems to netdev@vger.kernel.org
(added to CC:)

Many networking developers do not read linux-kernel

> Hi @all,
> 
> we have installed a dual port Brodcam Gigabit Ethernet NIC, and get the
> following error in dmesg:
> 
> tg3: eth1 No interrupt was generated using MSI, switching to INTx mode.
> Please report this failure to the PCI maintainer and include system
> chipset information.
> 
> Who is responsible for this error message? We are using Kernel 2.6.21.1
> and the NIC Chipset is a Broadcom BCM5715CKPBG
> 
> Regards,
> 
> Marc
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: tg3:No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.

[Michael Chan]

On Tue, 2008-10-28 at 12:04 -0700, David Miller wrote:
> From: Marc Donner <donner@dbd-breitband.de>
> Date: Tue, 28 Oct 2008 11:58:30 +0100
> 
> Please report networking problems to netdev@vger.kernel.org
> (added to CC:)
> 
> Many networking developers do not read linux-kernel
> 
> > Hi @all,
> > 
> > we have installed a dual port Brodcam Gigabit Ethernet NIC, and get the
> > following error in dmesg:
> > 
> > tg3: eth1 No interrupt was generated using MSI, switching to INTx mode.
> > Please report this failure to the PCI maintainer and include system
> > chipset information.
> > 
> > Who is responsible for this error message? We are using Kernel 2.6.21.1
> > and the NIC Chipset is a Broadcom BCM5715CKPBG
> > 

This message means that your system chipset (not the NIC) does not
support MSI.  Please provide lspci -vvv to show the system chipset on
your system.  Thanks.