* Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
@ 2008-12-18 11:32 Badalian Vyacheslav
2008-12-20 6:32 ` Andrew Morton
0 siblings, 1 reply; 7+ messages in thread
From: Badalian Vyacheslav @ 2008-12-18 11:32 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1804 bytes --]
Hello all.
After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
SATA controller in AHCI mode.
Platform is Intel SR1530HSH
Config attached.
Any patches for test? Any ideas? Any other info needed? Or i must go to
bugtracker? ;)
# lspci
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)
02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02)
03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller (rev 05)
Thanks!
[-- Attachment #2: inte_conf.gz --]
[-- Type: application/gzip, Size: 9819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-18 11:32 Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x Badalian Vyacheslav
@ 2008-12-20 6:32 ` Andrew Morton
2008-12-22 2:21 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Andrew Morton @ 2008-12-20 6:32 UTC (permalink / raw)
To: Badalian Vyacheslav; +Cc: linux-kernel, linux-ide
(cc linux-ide)
On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
> Hello all.
> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
> SATA controller in AHCI mode.
> Platform is Intel SR1530HSH
>
> Config attached.
>
> Any patches for test? Any ideas? Any other info needed? Or i must go to
> bugtracker? ;)
>
> # lspci
> 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
> 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
> Connection (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #5 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #2 (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 1 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 5 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
> 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
> Controller (rev 02)
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> port SATA AHCI Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
> (rev 02)
> 02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
> [Pilot] ServerEngines (SEP1) (rev 02)
> 03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
> Controller (rev 05)
>
> Thanks!
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-20 6:32 ` Andrew Morton
@ 2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Tejun Heo @ 2008-12-22 2:21 UTC (permalink / raw)
To: Andrew Morton; +Cc: Badalian Vyacheslav, linux-kernel, linux-ide
Andrew Morton wrote:
> (cc linux-ide)
>
> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>
>> Hello all.
>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>> SATA controller in AHCI mode.
>> Platform is Intel SR1530HSH
>>
>> Config attached.
>>
>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>> bugtracker? ;)
Does ahci.ahci_em_messages=0 help?
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 2:21 ` Tejun Heo
@ 2008-12-22 7:10 ` Badalian Vyacheslav
2008-12-22 7:15 ` Tejun Heo
2008-12-23 6:32 ` Badalian Vyacheslav
2008-12-25 6:34 ` Re[retry]: " Badalian Vyacheslav
2 siblings, 1 reply; 7+ messages in thread
From: Badalian Vyacheslav @ 2008-12-22 7:10 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
Tejun Heo пишет:
> Andrew Morton wrote:
>
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
Hello!
echo 0 > /sys/module/ahci/parameters/ahci_em_messages
-bash: /sys/module/ahci/parameters/ahci_em_messages: Permission denied
ls -la /sys/module/ahci/parameters/ahci_em_messages
-r--r--r-- 1 root root 4096 Dec 22 10:04
/sys/module/ahci/parameters/ahci_em_messages
Any other chance to change without it reboot? Or i can change it only at
boot? I will reboot server at night.
Vyacheslav
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 7:10 ` Badalian Vyacheslav
@ 2008-12-22 7:15 ` Tejun Heo
0 siblings, 0 replies; 7+ messages in thread
From: Tejun Heo @ 2008-12-22 7:15 UTC (permalink / raw)
To: Badalian Vyacheslav; +Cc: Andrew Morton, linux-kernel, linux-ide
Badalian Vyacheslav wrote:
> echo 0 > /sys/module/ahci/parameters/ahci_em_messages
> -bash: /sys/module/ahci/parameters/ahci_em_messages: Permission denied
> ls -la /sys/module/ahci/parameters/ahci_em_messages
> -r--r--r-- 1 root root 4096 Dec 22 10:04
> /sys/module/ahci/parameters/ahci_em_messages
>
> Any other chance to change without it reboot? Or i can change it only at
> boot? I will reboot server at night.
You can unload and reload ahci but that often isn't too different
from rebooting.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
@ 2008-12-23 6:32 ` Badalian Vyacheslav
2008-12-25 6:34 ` Re[retry]: " Badalian Vyacheslav
2 siblings, 0 replies; 7+ messages in thread
From: Badalian Vyacheslav @ 2008-12-23 6:32 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
Tejun Heo пишет:
> Andrew Morton wrote:
>
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
All leds turned off. No green led at bay with hard disk.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re[retry]: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
2008-12-23 6:32 ` Badalian Vyacheslav
@ 2008-12-25 6:34 ` Badalian Vyacheslav
2 siblings, 0 replies; 7+ messages in thread
From: Badalian Vyacheslav @ 2008-12-25 6:34 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
No. All leds is turned off. No green led at bay with hard disk.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2008-12-25 6:35 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-12-18 11:32 Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x Badalian Vyacheslav
2008-12-20 6:32 ` Andrew Morton
2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
2008-12-22 7:15 ` Tejun Heo
2008-12-23 6:32 ` Badalian Vyacheslav
2008-12-25 6:34 ` Re[retry]: " Badalian Vyacheslav
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox