[PATCH 2/2] Add /proc controls for pdflush threads

[PATCH 2/2] Add /proc controls for pdflush threads

[Peter W Morreale]

From: \"Peter W. Morreale\" <pmorreale@novell.com>

This patch adds /proc entries to give the admin the ability to
control the minimum and maximum number of pdflush threads.  This allows
finer control of pdflush on both large and small machines.

The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
'/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.
---

Signed-off-by: Peter W Morreale <pmorreale@novell.com>

 include/linux/sysctl.h    |    2 ++
 include/linux/writeback.h |    2 ++
 kernel/sysctl.c           |   16 ++++++++++++++++
 mm/pdflush.c              |   19 ++++++++++++++-----
 4 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index d0437f3..9921e62 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -205,6 +205,8 @@ enum
 	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
 	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
 	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
+	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
+	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
 };
 
 
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 12b15c5..ee566a0 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -150,6 +150,8 @@ void writeback_set_ratelimit(void);
 /* pdflush.c */
 extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
 				   read-only. */
+extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
+extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
 
 
 #endif		/* WRITEBACK_H */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 50ec088..6dae777 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -948,6 +948,22 @@ static struct ctl_table vm_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 	{
+		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,
+		.procname	= "nr_pdflush_threads_min",
+		.data		= &nr_pdflush_threads_min,
+		.maxlen		= sizeof nr_pdflush_threads_min,
+		.mode		= 0644 /* read-only*/,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
+		.ctl_name	= VM_NR_PDFLUSH_THREADS_MAX,
+		.procname	= "nr_pdflush_threads_max",
+		.data		= &nr_pdflush_threads_max,
+		.maxlen		= sizeof nr_pdflush_threads_max,
+		.mode		= 0644 /* read-only*/,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
 		.ctl_name	= VM_SWAPPINESS,
 		.procname	= "swappiness",
 		.data		= &vm_swappiness,
diff --git a/mm/pdflush.c b/mm/pdflush.c
index 481680f..9a6f835 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -58,6 +58,14 @@ static DEFINE_SPINLOCK(pdflush_lock);
 int nr_pdflush_threads = 0;
 
 /*
+ * The max/min number of pdflush threads. R/W by sysctl at 
+ * /proc/sys/vm/nr_pdflush_threads_max 
+ */
+int nr_pdflush_threads_max = MAX_PDFLUSH_THREADS;
+int nr_pdflush_threads_min = MIN_PDFLUSH_THREADS;
+
+
+/*
  * The time at which the pdflush thread pool last went empty
  */
 static unsigned long last_empty_jifs;
@@ -68,7 +76,7 @@ static unsigned long last_empty_jifs;
  * Thread pool management algorithm:
  * 
  * - The minimum and maximum number of pdflush instances are bound
- *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
+ *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
  * 
  * - If there have been no idle pdflush instances for 1 second, create
  *   a new one.
@@ -133,7 +141,8 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
 			if (list_empty(&pdflush_list)) {
-				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+				if (nr_pdflush_threads <
+						nr_pdflush_threads_max) {
 					nr_pdflush_threads++;
 					spin_unlock_irq(&pdflush_lock);
 					start_one_pdflush_thread();
@@ -150,7 +159,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (list_empty(&pdflush_list))
 			continue;
-		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
+		if (nr_pdflush_threads <= nr_pdflush_threads_min)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
 		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
@@ -246,9 +255,9 @@ static int __init pdflush_init(void)
 	 * Pre-set nr_pdflush_threads...  If we fail to create, 
 	 * the count will be decremented.
 	 */
-	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
+	nr_pdflush_threads = nr_pdflush_threads_min;
 
-	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
+	for (i = 0; i < nr_pdflush_threads_min; i++)
 		start_one_pdflush_thread();
 	return 0;
 }

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Randy Dunlap]

Peter W Morreale wrote:
> From: \"Peter W. Morreale\" <pmorreale@novell.com>
> 
> This patch adds /proc entries to give the admin the ability to
> control the minimum and maximum number of pdflush threads.  This allows
> finer control of pdflush on both large and small machines.
> 
> The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
> '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.

These need to be documented in (ugh) either
Documentation/filesystems/proc.txt or
Documentation/sysctl/vm.txt.  Hard to say which one, but I'd
recommend the latter (vm.txt) since they are sysctls.


It looks like there is a lot of duplication between them.
That's not good IMO.

> ---
> 
> Signed-off-by: Peter W Morreale <pmorreale@novell.com>
> 
>  include/linux/sysctl.h    |    2 ++
>  include/linux/writeback.h |    2 ++
>  kernel/sysctl.c           |   16 ++++++++++++++++
>  mm/pdflush.c              |   19 ++++++++++++++-----
>  4 files changed, 34 insertions(+), 5 deletions(-)
> 
> diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
> index d0437f3..9921e62 100644
> --- a/include/linux/sysctl.h
> +++ b/include/linux/sysctl.h
> @@ -205,6 +205,8 @@ enum
>  	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
>  	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
>  	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
> +	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
> +	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
>  };
>  
>  
> diff --git a/include/linux/writeback.h b/include/linux/writeback.h
> index 12b15c5..ee566a0 100644
> --- a/include/linux/writeback.h
> +++ b/include/linux/writeback.h
> @@ -150,6 +150,8 @@ void writeback_set_ratelimit(void);
>  /* pdflush.c */
>  extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
>  				   read-only. */
> +extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
> +extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
>  
>  
>  #endif		/* WRITEBACK_H */
> diff --git a/kernel/sysctl.c b/kernel/sysctl.c
> index 50ec088..6dae777 100644
> --- a/kernel/sysctl.c
> +++ b/kernel/sysctl.c
> @@ -948,6 +948,22 @@ static struct ctl_table vm_table[] = {
>  		.proc_handler	= &proc_dointvec,
>  	},
>  	{
> +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,
> +		.procname	= "nr_pdflush_threads_min",
> +		.data		= &nr_pdflush_threads_min,
> +		.maxlen		= sizeof nr_pdflush_threads_min,
> +		.mode		= 0644 /* read-only*/,
> +		.proc_handler	= &proc_dointvec,
> +	},
> +	{
> +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MAX,
> +		.procname	= "nr_pdflush_threads_max",
> +		.data		= &nr_pdflush_threads_max,
> +		.maxlen		= sizeof nr_pdflush_threads_max,
> +		.mode		= 0644 /* read-only*/,
> +		.proc_handler	= &proc_dointvec,
> +	},
> +	{
>  		.ctl_name	= VM_SWAPPINESS,
>  		.procname	= "swappiness",
>  		.data		= &vm_swappiness,
> diff --git a/mm/pdflush.c b/mm/pdflush.c
> index 481680f..9a6f835 100644
> --- a/mm/pdflush.c
> +++ b/mm/pdflush.c
> @@ -58,6 +58,14 @@ static DEFINE_SPINLOCK(pdflush_lock);
>  int nr_pdflush_threads = 0;
>  
>  /*
> + * The max/min number of pdflush threads. R/W by sysctl at 
> + * /proc/sys/vm/nr_pdflush_threads_max 
> + */
> +int nr_pdflush_threads_max = MAX_PDFLUSH_THREADS;
> +int nr_pdflush_threads_min = MIN_PDFLUSH_THREADS;
> +
> +
> +/*
>   * The time at which the pdflush thread pool last went empty
>   */
>  static unsigned long last_empty_jifs;
> @@ -68,7 +76,7 @@ static unsigned long last_empty_jifs;
>   * Thread pool management algorithm:
>   * 
>   * - The minimum and maximum number of pdflush instances are bound
> - *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
> + *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
>   * 
>   * - If there have been no idle pdflush instances for 1 second, create
>   *   a new one.
> @@ -133,7 +141,8 @@ static int __pdflush(struct pdflush_work *my_work)
>  		 */
>  		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
>  			if (list_empty(&pdflush_list)) {
> -				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
> +				if (nr_pdflush_threads <
> +						nr_pdflush_threads_max) {
>  					nr_pdflush_threads++;
>  					spin_unlock_irq(&pdflush_lock);
>  					start_one_pdflush_thread();
> @@ -150,7 +159,7 @@ static int __pdflush(struct pdflush_work *my_work)
>  		 */
>  		if (list_empty(&pdflush_list))
>  			continue;
> -		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
> +		if (nr_pdflush_threads <= nr_pdflush_threads_min)
>  			continue;
>  		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
>  		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
> @@ -246,9 +255,9 @@ static int __init pdflush_init(void)
>  	 * Pre-set nr_pdflush_threads...  If we fail to create, 
>  	 * the count will be decremented.
>  	 */
> -	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
> +	nr_pdflush_threads = nr_pdflush_threads_min;
>  
> -	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
> +	for (i = 0; i < nr_pdflush_threads_min; i++)
>  		start_one_pdflush_thread();
>  	return 0;
>  }


-- 
~Randy

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Peter W. Morreale]

On Tue, 2008-12-30 at 15:59 -0800, Randy Dunlap wrote:
> Peter W Morreale wrote:
> > From: \"Peter W. Morreale\" <pmorreale@novell.com>
> > 
> > This patch adds /proc entries to give the admin the ability to
> > control the minimum and maximum number of pdflush threads.  This allows
> > finer control of pdflush on both large and small machines.
> > 
> > The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
> > '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.
> 
> These need to be documented in (ugh) either
> Documentation/filesystems/proc.txt or
> Documentation/sysctl/vm.txt.  Hard to say which one, but I'd
> recommend the latter (vm.txt) since they are sysctls.
> 

Excellent point.  Will re-spin.

Thx,
-PWM

> 
> It looks like there is a lot of duplication between them.
> That's not good IMO.
> 
> > ---
> > 
> > Signed-off-by: Peter W Morreale <pmorreale@novell.com>
> > 
> >  include/linux/sysctl.h    |    2 ++
> >  include/linux/writeback.h |    2 ++
> >  kernel/sysctl.c           |   16 ++++++++++++++++
> >  mm/pdflush.c              |   19 ++++++++++++++-----
> >  4 files changed, 34 insertions(+), 5 deletions(-)
> > 
> > diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
> > index d0437f3..9921e62 100644
> > --- a/include/linux/sysctl.h
> > +++ b/include/linux/sysctl.h
> > @@ -205,6 +205,8 @@ enum
> >  	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
> >  	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
> >  	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
> > +	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
> > +	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
> >  };
> >  
> >  
> > diff --git a/include/linux/writeback.h b/include/linux/writeback.h
> > index 12b15c5..ee566a0 100644
> > --- a/include/linux/writeback.h
> > +++ b/include/linux/writeback.h
> > @@ -150,6 +150,8 @@ void writeback_set_ratelimit(void);
> >  /* pdflush.c */
> >  extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
> >  				   read-only. */
> > +extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
> > +extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
> >  
> >  
> >  #endif		/* WRITEBACK_H */
> > diff --git a/kernel/sysctl.c b/kernel/sysctl.c
> > index 50ec088..6dae777 100644
> > --- a/kernel/sysctl.c
> > +++ b/kernel/sysctl.c
> > @@ -948,6 +948,22 @@ static struct ctl_table vm_table[] = {
> >  		.proc_handler	= &proc_dointvec,
> >  	},
> >  	{
> > +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,
> > +		.procname	= "nr_pdflush_threads_min",
> > +		.data		= &nr_pdflush_threads_min,
> > +		.maxlen		= sizeof nr_pdflush_threads_min,
> > +		.mode		= 0644 /* read-only*/,
> > +		.proc_handler	= &proc_dointvec,
> > +	},
> > +	{
> > +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MAX,
> > +		.procname	= "nr_pdflush_threads_max",
> > +		.data		= &nr_pdflush_threads_max,
> > +		.maxlen		= sizeof nr_pdflush_threads_max,
> > +		.mode		= 0644 /* read-only*/,
> > +		.proc_handler	= &proc_dointvec,
> > +	},
> > +	{
> >  		.ctl_name	= VM_SWAPPINESS,
> >  		.procname	= "swappiness",
> >  		.data		= &vm_swappiness,
> > diff --git a/mm/pdflush.c b/mm/pdflush.c
> > index 481680f..9a6f835 100644
> > --- a/mm/pdflush.c
> > +++ b/mm/pdflush.c
> > @@ -58,6 +58,14 @@ static DEFINE_SPINLOCK(pdflush_lock);
> >  int nr_pdflush_threads = 0;
> >  
> >  /*
> > + * The max/min number of pdflush threads. R/W by sysctl at 
> > + * /proc/sys/vm/nr_pdflush_threads_max 
> > + */
> > +int nr_pdflush_threads_max = MAX_PDFLUSH_THREADS;
> > +int nr_pdflush_threads_min = MIN_PDFLUSH_THREADS;
> > +
> > +
> > +/*
> >   * The time at which the pdflush thread pool last went empty
> >   */
> >  static unsigned long last_empty_jifs;
> > @@ -68,7 +76,7 @@ static unsigned long last_empty_jifs;
> >   * Thread pool management algorithm:
> >   * 
> >   * - The minimum and maximum number of pdflush instances are bound
> > - *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
> > + *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
> >   * 
> >   * - If there have been no idle pdflush instances for 1 second, create
> >   *   a new one.
> > @@ -133,7 +141,8 @@ static int __pdflush(struct pdflush_work *my_work)
> >  		 */
> >  		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
> >  			if (list_empty(&pdflush_list)) {
> > -				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
> > +				if (nr_pdflush_threads <
> > +						nr_pdflush_threads_max) {
> >  					nr_pdflush_threads++;
> >  					spin_unlock_irq(&pdflush_lock);
> >  					start_one_pdflush_thread();
> > @@ -150,7 +159,7 @@ static int __pdflush(struct pdflush_work *my_work)
> >  		 */
> >  		if (list_empty(&pdflush_list))
> >  			continue;
> > -		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
> > +		if (nr_pdflush_threads <= nr_pdflush_threads_min)
> >  			continue;
> >  		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
> >  		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
> > @@ -246,9 +255,9 @@ static int __init pdflush_init(void)
> >  	 * Pre-set nr_pdflush_threads...  If we fail to create, 
> >  	 * the count will be decremented.
> >  	 */
> > -	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
> > +	nr_pdflush_threads = nr_pdflush_threads_min;
> >  
> > -	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
> > +	for (i = 0; i < nr_pdflush_threads_min; i++)
> >  		start_one_pdflush_thread();
> >  	return 0;
> >  }
> 
> 

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Peter W. Morreale]

On Tue, 2008-12-30 at 15:59 -0800, Randy Dunlap wrote:
> Peter W Morreale wrote:
> > From: \"Peter W. Morreale\" <pmorreale@novell.com>
> > 
> > This patch adds /proc entries to give the admin the ability to
> > control the minimum and maximum number of pdflush threads.  This allows
> > finer control of pdflush on both large and small machines.
> > 
> > The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
> > '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.
> 
> These need to be documented in (ugh) either
> Documentation/filesystems/proc.txt or
> Documentation/sysctl/vm.txt.  Hard to say which one, but I'd
> recommend the latter (vm.txt) since they are sysctls.
> 
> 
> It looks like there is a lot of duplication between them.
> That's not good IMO.
> 

Hummm... worse than that.  Documentation/sysctl/vm.txt is missing 9
proc/sys/vm entries and hasn't been updated since (ahem) 2.2.10. 

Documentation/file_systems/proc.txt is much more recent -
2.4.0-test11-pre4.  My how time flies... :-)

I can take a stab at updating vm.txt.  Would it be ok to remove the vm
verbiage from proc.txt and replace it with a pointer to vm.txt? 

-PWM
 
> > ---
> > 
> > Signed-off-by: Peter W Morreale <pmorreale@novell.com>
> > 
> >  include/linux/sysctl.h    |    2 ++
> >  include/linux/writeback.h |    2 ++
> >  kernel/sysctl.c           |   16 ++++++++++++++++
> >  mm/pdflush.c              |   19 ++++++++++++++-----
> >  4 files changed, 34 insertions(+), 5 deletions(-)
> > 
> > diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
> > index d0437f3..9921e62 100644
> > --- a/include/linux/sysctl.h
> > +++ b/include/linux/sysctl.h
> > @@ -205,6 +205,8 @@ enum
> >  	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
> >  	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
> >  	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
> > +	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
> > +	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
> >  };
> >  
> >  
> > diff --git a/include/linux/writeback.h b/include/linux/writeback.h
> > index 12b15c5..ee566a0 100644
> > --- a/include/linux/writeback.h
> > +++ b/include/linux/writeback.h
> > @@ -150,6 +150,8 @@ void writeback_set_ratelimit(void);
> >  /* pdflush.c */
> >  extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
> >  				   read-only. */
> > +extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
> > +extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
> >  
> >  
> >  #endif		/* WRITEBACK_H */
> > diff --git a/kernel/sysctl.c b/kernel/sysctl.c
> > index 50ec088..6dae777 100644
> > --- a/kernel/sysctl.c
> > +++ b/kernel/sysctl.c
> > @@ -948,6 +948,22 @@ static struct ctl_table vm_table[] = {
> >  		.proc_handler	= &proc_dointvec,
> >  	},
> >  	{
> > +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,
> > +		.procname	= "nr_pdflush_threads_min",
> > +		.data		= &nr_pdflush_threads_min,
> > +		.maxlen		= sizeof nr_pdflush_threads_min,
> > +		.mode		= 0644 /* read-only*/,
> > +		.proc_handler	= &proc_dointvec,
> > +	},
> > +	{
> > +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MAX,
> > +		.procname	= "nr_pdflush_threads_max",
> > +		.data		= &nr_pdflush_threads_max,
> > +		.maxlen		= sizeof nr_pdflush_threads_max,
> > +		.mode		= 0644 /* read-only*/,
> > +		.proc_handler	= &proc_dointvec,
> > +	},
> > +	{
> >  		.ctl_name	= VM_SWAPPINESS,
> >  		.procname	= "swappiness",
> >  		.data		= &vm_swappiness,
> > diff --git a/mm/pdflush.c b/mm/pdflush.c
> > index 481680f..9a6f835 100644
> > --- a/mm/pdflush.c
> > +++ b/mm/pdflush.c
> > @@ -58,6 +58,14 @@ static DEFINE_SPINLOCK(pdflush_lock);
> >  int nr_pdflush_threads = 0;
> >  
> >  /*
> > + * The max/min number of pdflush threads. R/W by sysctl at 
> > + * /proc/sys/vm/nr_pdflush_threads_max 
> > + */
> > +int nr_pdflush_threads_max = MAX_PDFLUSH_THREADS;
> > +int nr_pdflush_threads_min = MIN_PDFLUSH_THREADS;
> > +
> > +
> > +/*
> >   * The time at which the pdflush thread pool last went empty
> >   */
> >  static unsigned long last_empty_jifs;
> > @@ -68,7 +76,7 @@ static unsigned long last_empty_jifs;
> >   * Thread pool management algorithm:
> >   * 
> >   * - The minimum and maximum number of pdflush instances are bound
> > - *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
> > + *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
> >   * 
> >   * - If there have been no idle pdflush instances for 1 second, create
> >   *   a new one.
> > @@ -133,7 +141,8 @@ static int __pdflush(struct pdflush_work *my_work)
> >  		 */
> >  		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
> >  			if (list_empty(&pdflush_list)) {
> > -				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
> > +				if (nr_pdflush_threads <
> > +						nr_pdflush_threads_max) {
> >  					nr_pdflush_threads++;
> >  					spin_unlock_irq(&pdflush_lock);
> >  					start_one_pdflush_thread();
> > @@ -150,7 +159,7 @@ static int __pdflush(struct pdflush_work *my_work)
> >  		 */
> >  		if (list_empty(&pdflush_list))
> >  			continue;
> > -		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
> > +		if (nr_pdflush_threads <= nr_pdflush_threads_min)
> >  			continue;
> >  		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
> >  		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
> > @@ -246,9 +255,9 @@ static int __init pdflush_init(void)
> >  	 * Pre-set nr_pdflush_threads...  If we fail to create, 
> >  	 * the count will be decremented.
> >  	 */
> > -	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
> > +	nr_pdflush_threads = nr_pdflush_threads_min;
> >  
> > -	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
> > +	for (i = 0; i < nr_pdflush_threads_min; i++)
> >  		start_one_pdflush_thread();
> >  	return 0;
> >  }
> 
> 

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Randy Dunlap]

Peter W. Morreale wrote:
> On Tue, 2008-12-30 at 15:59 -0800, Randy Dunlap wrote:
>> Peter W Morreale wrote:
>>> From: \"Peter W. Morreale\" <pmorreale@novell.com>
>>>
>>> This patch adds /proc entries to give the admin the ability to
>>> control the minimum and maximum number of pdflush threads.  This allows
>>> finer control of pdflush on both large and small machines.
>>>
>>> The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
>>> '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.
>> These need to be documented in (ugh) either
>> Documentation/filesystems/proc.txt or
>> Documentation/sysctl/vm.txt.  Hard to say which one, but I'd
>> recommend the latter (vm.txt) since they are sysctls.
>>
>>
>> It looks like there is a lot of duplication between them.
>> That's not good IMO.
>>
> 
> Hummm... worse than that.  Documentation/sysctl/vm.txt is missing 9
> proc/sys/vm entries and hasn't been updated since (ahem) 2.2.10. 
> 
> Documentation/file_systems/proc.txt is much more recent -
> 2.4.0-test11-pre4.  My how time flies... :-)

Thanks for checking on those.

> I can take a stab at updating vm.txt.  Would it be ok to remove the vm
> verbiage from proc.txt and replace it with a pointer to vm.txt? 

Yes, sounds good to me (for sysctls).  Thanks again.

> 
> -PWM
>  
>>> ---
>>>
>>> Signed-off-by: Peter W Morreale <pmorreale@novell.com>
>>>
>>>  include/linux/sysctl.h    |    2 ++
>>>  include/linux/writeback.h |    2 ++
>>>  kernel/sysctl.c           |   16 ++++++++++++++++
>>>  mm/pdflush.c              |   19 ++++++++++++++-----
>>>  4 files changed, 34 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
>>> index d0437f3..9921e62 100644
>>> --- a/include/linux/sysctl.h
>>> +++ b/include/linux/sysctl.h
>>> @@ -205,6 +205,8 @@ enum
>>>  	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
>>>  	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
>>>  	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
>>> +	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
>>> +	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
>>>  };
>>>  
>>>  
>>> diff --git a/include/linux/writeback.h b/include/linux/writeback.h
>>> index 12b15c5..ee566a0 100644
>>> --- a/include/linux/writeback.h
>>> +++ b/include/linux/writeback.h
>>> @@ -150,6 +150,8 @@ void writeback_set_ratelimit(void);
>>>  /* pdflush.c */
>>>  extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
>>>  				   read-only. */
>>> +extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
>>> +extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
>>>  
>>>  
>>>  #endif		/* WRITEBACK_H */
>>> diff --git a/kernel/sysctl.c b/kernel/sysctl.c
>>> index 50ec088..6dae777 100644
>>> --- a/kernel/sysctl.c
>>> +++ b/kernel/sysctl.c
>>> @@ -948,6 +948,22 @@ static struct ctl_table vm_table[] = {
>>>  		.proc_handler	= &proc_dointvec,
>>>  	},
>>>  	{
>>> +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,
>>> +		.procname	= "nr_pdflush_threads_min",
>>> +		.data		= &nr_pdflush_threads_min,
>>> +		.maxlen		= sizeof nr_pdflush_threads_min,
>>> +		.mode		= 0644 /* read-only*/,
>>> +		.proc_handler	= &proc_dointvec,
>>> +	},
>>> +	{
>>> +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MAX,
>>> +		.procname	= "nr_pdflush_threads_max",
>>> +		.data		= &nr_pdflush_threads_max,
>>> +		.maxlen		= sizeof nr_pdflush_threads_max,
>>> +		.mode		= 0644 /* read-only*/,
>>> +		.proc_handler	= &proc_dointvec,
>>> +	},
>>> +	{
>>>  		.ctl_name	= VM_SWAPPINESS,
>>>  		.procname	= "swappiness",
>>>  		.data		= &vm_swappiness,


-- 
~Randy

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Andrew Morton]

On Tue, 30 Dec 2008 16:12:33 -0700 Peter W Morreale <pmorreale@novell.com> wrote:

> From: \"Peter W. Morreale\" <pmorreale@novell.com>
> 
> This patch adds /proc entries to give the admin the ability to
> control the minimum and maximum number of pdflush threads.  This allows
> finer control of pdflush on both large and small machines.
> 
> The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
> '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.

Why is this needed?  Where's the benefit?  What observations led you to
develop this patch?  etc.

> --- a/include/linux/sysctl.h
> +++ b/include/linux/sysctl.h
> @@ -205,6 +205,8 @@ enum
>  	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
>  	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
>  	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
> +	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
> +	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
>  };

We don't do this any more...

>  		.proc_handler	= &proc_dointvec,
>  	},
>  	{
> +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,

please just use CTL_UNNUMBERED here.

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Peter W. Morreale]

On Wed, 2008-12-31 at 00:01 -0800, Andrew Morton wrote:
> On Tue, 30 Dec 2008 16:12:33 -0700 Peter W Morreale <pmorreale@novell.com> wrote:
> 
> > From: \"Peter W. Morreale\" <pmorreale@novell.com>
> > 
> > This patch adds /proc entries to give the admin the ability to
> > control the minimum and maximum number of pdflush threads.  This allows
> > finer control of pdflush on both large and small machines.
> > 
> > The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
> > '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.
> 
> Why is this needed?  Where's the benefit?  What observations led you to
> develop this patch?  etc.

I assume you are caught up on this thread Andrew?  (A later post
outlined the rational) 

> 
> > --- a/include/linux/sysctl.h
> > +++ b/include/linux/sysctl.h
> > @@ -205,6 +205,8 @@ enum
> >  	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
> >  	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
> >  	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
> > +	VM_NR_PDFLUSH_THREADS_MAX=36, /* nr_pdflush_threads_max */
> > +	VM_NR_PDFLUSH_THREADS_MIN=37, /* nr_pdflush_threads_min */
> >  };
> 
> We don't do this any more...
> 

nod.  

> >  		.proc_handler	= &proc_dointvec,
> >  	},
> >  	{
> > +		.ctl_name	= VM_NR_PDFLUSH_THREADS_MIN,
> 
> please just use CTL_UNNUMBERED here.
> 

nod.  Thanks,

-PWM

> 

[PATCH 0/2] fix pdflush races and enhancement v2

[Peter W Morreale]

Update of pdflush series, changes since last post:

o Change upper bound patch to include update of last_empty_jifs to throttle 
thread creation to one per second.

o Change new sysctls to use CTL_UNNUMBERED per Andrew Morton

o Use proc_dointvec_minmax and tie bounds of min and max threads to 
the current min/max.  Otherwise the possible combinations of actual
threads makes my head hurt.

o Update Documentation/sysctl/vm.txt with the new entries


Peter W Morreale (2):
      Add /proc controls for pdflush threads
      Fix pdflush thread creation upper bound.


 Documentation/sysctl/vm.txt |   28 ++++++++++++++++++++++++++
 include/linux/writeback.h   |    2 ++
 kernel/sysctl.c             |   25 +++++++++++++++++++++--
 mm/pdflush.c                |   47 ++++++++++++++++++++++++++++++++++---------
 4 files changed, 90 insertions(+), 12 deletions(-)


Best,
-PWM

[PATCH 1/2] Fix pdflush thread creation upper bound.

[Peter W Morreale]

This patch fixes a race on creating pdflush threads.  Without the patch,
it is possible to create more than MAX_PDFLUSH_THREADS threads, and this
has been observed in practice on IO loaded SMP machines.

The fix involves moving the lock around to protect the check against the
thread count and correctly dealing with thread creation failure.

This fix also _mostly_ repairs a race condition on how quickly the
threads are created.  The original intent was to create a pdflush thread
(up to the max allowed) every second.  Without this patch is is possible
to create NCPUS pdflush threads concurrently.  The 'mostly' caveat is
because an assumption is made that thread creation will be successful.
If we fail to create the thread, the miss is not considered fatal. (we
will try again in 1 second)
---

Signed-off-by: Peter W Morreale <pmorreale@novell.com>

 mm/pdflush.c |   32 +++++++++++++++++++++++++-------
 1 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/mm/pdflush.c b/mm/pdflush.c
index 0cbe0c6..80745c7 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -98,7 +98,6 @@ static int __pdflush(struct pdflush_work *my_work)
 	INIT_LIST_HEAD(&my_work->list);
 
 	spin_lock_irq(&pdflush_lock);
-	nr_pdflush_threads++;
 	for ( ; ; ) {
 		struct pdflush_work *pdf;
 
@@ -126,20 +125,26 @@ static int __pdflush(struct pdflush_work *my_work)
 
 		(*my_work->fn)(my_work->arg0);
 
+		spin_lock_irq(&pdflush_lock);
+
 		/*
 		 * Thread creation: For how long have there been zero
-		 * available threads?
+		 * available threads?  
+		 *
+		 * To throttle creation, we reset last_empty_jifs.
 		 */
 		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
-			/* unlocked list_empty() test is OK here */
 			if (list_empty(&pdflush_list)) {
-				/* unlocked test is OK here */
-				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS)
+				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+					last_empty_jifs = jiffies;
+					nr_pdflush_threads++;
+					spin_unlock_irq(&pdflush_lock);
 					start_one_pdflush_thread();
+					spin_lock_irq(&pdflush_lock);
+				}
 			}
 		}
 
-		spin_lock_irq(&pdflush_lock);
 		my_work->fn = NULL;
 
 		/*
@@ -226,13 +231,26 @@ int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0)
 
 static void start_one_pdflush_thread(void)
 {
-	kthread_run(pdflush, NULL, "pdflush");
+	struct task_struct *k;
+
+	k = kthread_run(pdflush, NULL, "pdflush");
+	if (unlikely(IS_ERR(k))) {
+		spin_lock_irq(&pdflush_lock);
+		nr_pdflush_threads--;
+		spin_unlock_irq(&pdflush_lock);
+	}
 }
 
 static int __init pdflush_init(void)
 {
 	int i;
 
+	/*
+	 * Pre-set nr_pdflush_threads...  If we fail to create, 
+	 * the count will be decremented.
+	 */
+	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
+
 	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
 		start_one_pdflush_thread();
 	return 0;

[PATCH 2/2] Add /proc controls for pdflush threads

[Peter W Morreale]

This patch adds /proc entries to give the admin the ability to
control the minimum and maximum number of pdflush threads.  This allows
finer control of pdflush on both large and small machines.

The rational is simply one size does not fit all.  Admins on large
and/or small systems may want to tune the min/max pdflush thread count
to best suit their needs.  Right now the min/max is hardcoded to 2/8.
While probably a fair estimate for smaller machines, large machines with
large numbers of CPUs and large numbers of filesystems/block devices may
benefit from larger numbers of threads working on different block
devices.

Even if the background flushing algorithm is radically changed, it is
still likely that multiple threads will be involved and admins would
still desire finer control on the min/max other than to have to
recompile the kernel.

The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
'/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.

The minimum value for nr_pdflush_threads_min is 1 and the maximum value is the
current value of nr_pdflush_threads_max.  This minimum is required since
additional thread creation is performed in a pdflush thread itself.

The minimum value for nr_pdflush_threads_max is the current value of
nr_pdflush_threads_min and the maximum value can be 1000.

Documentation/sysctl/vm.txt is also updated.
---

Signed-off-by: Peter W Morreale <pmorreale@novell.com>

 Documentation/sysctl/vm.txt |   28 ++++++++++++++++++++++++++++
 include/linux/writeback.h   |    2 ++
 kernel/sysctl.c             |   25 +++++++++++++++++++++++--
 mm/pdflush.c                |   19 ++++++++++++++-----
 4 files changed, 67 insertions(+), 7 deletions(-)

diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index d79eeda..c2a257a 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -22,6 +22,8 @@ Currently, these files are in /proc/sys/vm:
 - dirty_background_ratio
 - dirty_expire_centisecs
 - dirty_writeback_centisecs
+- nr_pdflush_threads_min
+- nr_pdflush_threads_max
 - highmem_is_dirtyable   (only if CONFIG_HIGHMEM set)
 - max_map_count
 - min_free_kbytes
@@ -50,6 +52,32 @@ See Documentation/filesystems/proc.txt
 
 ==============================================================
 
+nr_pdflush_threads_min
+
+This value controls the minimum number of pdflush threads. 
+
+At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
+threads for the kernel's lifetime.  
+
+The default value is 2.  The minimum value you can specify is 1, and 
+the maximum value is the current setting of 'nr_pdflush_threads_max'.
+
+See 'nr_pdflush_threads_max' below for more information.
+
+==============================================================
+
+nr_pdflush_threads_max
+
+This value controls the maximum number of pdflush threads that can be
+created.  The pdflush algorithm will create a new pdflush thread (up to
+this maximum) if no pdflush threads have been available for >= 1 second.  
+
+The default value is 8.  The minimum value you can specify is the
+current value of 'nr_pdflush_threads_min' and the
+maximum is 1000. 
+
+==============================================================
+
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 12b15c5..ee566a0 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -150,6 +150,8 @@ void writeback_set_ratelimit(void);
 /* pdflush.c */
 extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
 				   read-only. */
+extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
+extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
 
 
 #endif		/* WRITEBACK_H */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 50ec088..96ba6b3 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -88,9 +88,8 @@ extern int rcutorture_runnable;
 #endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
 
 /* Constants used for minimum and  maximum */
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_DETECT_SOFTLOCKUP)
 static int one = 1;
-#endif
+static int one_thousand = 1000;
 
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 static int sixty = 60;
@@ -948,6 +947,28 @@ static struct ctl_table vm_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "nr_pdflush_threads_min",
+		.data		= &nr_pdflush_threads_min,
+		.maxlen		= sizeof nr_pdflush_threads_min,
+		.mode		= 0644 /* read-write */,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &one,
+		.extra2		= &nr_pdflush_threads_max,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "nr_pdflush_threads_max",
+		.data		= &nr_pdflush_threads_max,
+		.maxlen		= sizeof nr_pdflush_threads_max,
+		.mode		= 0644 /* read-write */,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &nr_pdflush_threads_min,
+		.extra2		= &one_thousand,
+	},
+	{
 		.ctl_name	= VM_SWAPPINESS,
 		.procname	= "swappiness",
 		.data		= &vm_swappiness,
diff --git a/mm/pdflush.c b/mm/pdflush.c
index 80745c7..1409649 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -58,6 +58,14 @@ static DEFINE_SPINLOCK(pdflush_lock);
 int nr_pdflush_threads = 0;
 
 /*
+ * The max/min number of pdflush threads. R/W by sysctl at 
+ * /proc/sys/vm/nr_pdflush_threads_max 
+ */
+int nr_pdflush_threads_max = MAX_PDFLUSH_THREADS;
+int nr_pdflush_threads_min = MIN_PDFLUSH_THREADS;
+
+
+/*
  * The time at which the pdflush thread pool last went empty
  */
 static unsigned long last_empty_jifs;
@@ -68,7 +76,7 @@ static unsigned long last_empty_jifs;
  * Thread pool management algorithm:
  * 
  * - The minimum and maximum number of pdflush instances are bound
- *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
+ *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
  * 
  * - If there have been no idle pdflush instances for 1 second, create
  *   a new one.
@@ -135,7 +143,8 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
 			if (list_empty(&pdflush_list)) {
-				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+				if (nr_pdflush_threads <
+						nr_pdflush_threads_max) {
 					last_empty_jifs = jiffies;
 					nr_pdflush_threads++;
 					spin_unlock_irq(&pdflush_lock);
@@ -153,7 +162,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (list_empty(&pdflush_list))
 			continue;
-		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
+		if (nr_pdflush_threads <= nr_pdflush_threads_min)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
 		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
@@ -249,9 +258,9 @@ static int __init pdflush_init(void)
 	 * Pre-set nr_pdflush_threads...  If we fail to create, 
 	 * the count will be decremented.
 	 */
-	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
+	nr_pdflush_threads = nr_pdflush_threads_min;
 
-	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
+	for (i = 0; i < nr_pdflush_threads_min; i++)
 		start_one_pdflush_thread();
 	return 0;
 }

Re: [PATCH 1/2] Fix pdflush thread creation upper bound.

[Rik van Riel]

Peter W Morreale wrote:
> This patch fixes a race on creating pdflush threads.  Without the patch,
> it is possible to create more than MAX_PDFLUSH_THREADS threads, and this
> has been observed in practice on IO loaded SMP machines.

> 
> Signed-off-by: Peter W Morreale <pmorreale@novell.com>

Reviewed-by: Rik van Riel <riel@redhat.com>

-- 
All rights reversed.

Re: [PATCH 2/2] Add /proc controls for pdflush threads

[Rik van Riel]

Peter W Morreale wrote:
> This patch adds /proc entries to give the admin the ability to
> control the minimum and maximum number of pdflush threads.  This allows
> finer control of pdflush on both large and small machines.

> Signed-off-by: Peter W Morreale <pmorreale@novell.com>

Reviewed-by: Rik van Riel <riel@redhat.com>

-- 
All rights reversed.