Re: [PATCH v15 1/1] clk: npcm8xx: add clock controller

[Stephen Boyd <sboyd@kernel.org>]

Quoting Tomer Maimon (2023-03-09 11:44:02)
> diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> new file mode 100644
> index 000000000000..67058f121251
> --- /dev/null
> +++ b/drivers/clk/clk-npcm8xx.c
> @@ -0,0 +1,561 @@
[...]
> +
> +struct npcm8xx_pll_data {
> +       const char *name;
> +       struct clk_parent_data parent;
> +       unsigned int reg;
> +       unsigned long flags;
> +};
> +
> +struct npcm8xx_clk_div_data {
> +       u32 reg;
> +       u8 shift;
> +       u8 width;
> +       const char *name;
> +       const struct clk_parent_data parent_data;
> +       u8 clk_divider_flags;
> +       unsigned long flags;
> +       int onecell_idx;
> +};
> +
> +struct npcm8xx_clk_mux_data {
> +       u8 shift;
> +       u32 mask;
> +       const u32 *table;
> +       const char *name;
> +       const struct clk_parent_data *parent_data;
> +       u8 num_parents;
> +       unsigned long flags;
> +};
> +
[...]
> +
> +static struct npcm8xx_pll_data npcm8xx_pll_clks[] = {

Can this be const?

> +       { NPCM8XX_CLK_S_PLL0, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCON0, 0 },
> +       { NPCM8XX_CLK_S_PLL1, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCON1, 0 },
> +       { NPCM8XX_CLK_S_PLL2, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCON2, 0 },
> +       { NPCM8XX_CLK_S_PLL_GFX, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCONG, 0 },
> +};
> +
> +static const u32 cpuck_mux_table[] = { 0, 1, 2, 7 };
> +static const struct clk_parent_data cpuck_mux_parents[] = {
> +       { .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },

You should only have .fw_name or .index when introducing new drivers.
The .name field is for existing drivers that want to migrate to
clk_parent_data.

> +       { .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
> +       { .name = NPCM8XX_CLK_S_REFCLK },

Note, this line says to use '.index = 0', and .name will be ignored.
Maybe just use the index for everything? That makes it simpler and
potentially faster because we don't have to do string comparisons
anywhere.

> +       { .fw_name = NPCM8XX_CLK_S_PLL2, .name = NPCM8XX_CLK_S_PLL2 }
> +};
> +
> +static const u32 pixcksel_mux_table[] = { 0, 2 };
> +static const struct clk_parent_data pixcksel_mux_parents[] = {
> +       { .fw_name = NPCM8XX_CLK_S_PLL_GFX, .name = NPCM8XX_CLK_S_PLL_GFX },
> +       { .name = NPCM8XX_CLK_S_REFCLK }
> +};
> +
[...]
> +
> +static unsigned long npcm8xx_clk_pll_recalc_rate(struct clk_hw *hw,
> +                                                unsigned long parent_rate)
> +{
> +       struct npcm8xx_clk_pll *pll = to_npcm8xx_clk_pll(hw);
> +       unsigned long fbdv, indv, otdv1, otdv2;
> +       unsigned int val;
> +       u64 ret;
> +
> +       if (parent_rate == 0) {
> +               pr_debug("%s: parent rate is zero\n", __func__);
> +               return 0;
> +       }
> +
> +       val = readl_relaxed(pll->pllcon + pll->reg);

Is pll->reg ever set?

> +
> +       indv = FIELD_GET(PLLCON_INDV, val);
> +       fbdv = FIELD_GET(PLLCON_FBDV, val);
> +       otdv1 = FIELD_GET(PLLCON_OTDV1, val);
> +       otdv2 = FIELD_GET(PLLCON_OTDV2, val);
> +
> +       ret = (u64)parent_rate * fbdv;
> +       do_div(ret, indv * otdv1 * otdv2);
> +
> +       return ret;
> +}
> +
> +static const struct clk_ops npcm8xx_clk_pll_ops = {
> +       .recalc_rate = npcm8xx_clk_pll_recalc_rate,
> +};
> +
> +static struct clk_hw *
> +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
> +                        const char *name, const struct clk_parent_data *parent,
> +                        unsigned long flags)
> +{
> +       struct npcm8xx_clk_pll *pll;
> +       struct clk_init_data init = {};
> +       int ret;
> +
> +       pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> +       if (!pll)
> +               return ERR_PTR(-ENOMEM);
> +
> +       init.name = name;
> +       init.ops = &npcm8xx_clk_pll_ops;
> +       init.parent_data = parent;
> +       init.num_parents = 1;
> +       init.flags = flags;
> +
> +       pll->pllcon = pllcon;
> +       pll->hw.init = &init;
> +
> +       ret = devm_clk_hw_register(dev, &pll->hw);
> +       if (ret) {
> +               kfree(pll);
> +               return ERR_PTR(ret);
> +       }
> +
> +       return &pll->hw;
> +}
> +
> +static DEFINE_SPINLOCK(npcm8xx_clk_lock);
> +
> +static int npcm8xx_clk_probe(struct platform_device *pdev)
> +{
> +       struct clk_hw_onecell_data *npcm8xx_clk_data;
> +       struct device *dev = &pdev->dev;
> +       void __iomem *clk_base;
> +       struct resource *res;
> +       struct clk_hw *hw;
> +       unsigned int i;
> +       int err;
> +
> +       npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
> +                                                        NPCM8XX_NUM_CLOCKS),
> +                                       GFP_KERNEL);
> +       if (!npcm8xx_clk_data)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       clk_base = devm_ioremap(dev, res->start, resource_size(res));

Can you use devm_platform_ioremap_resource() instead?

> +       if (!clk_base) {

Then this is checked for error pointer.

> +               dev_err(&pdev->dev, "Failed to remap I/O memory\n");

And no error message.

> +               return -ENOMEM;
> +       }
> +
> +       npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
> +
[....]
> +       if (IS_ERR(hw)) {
> +               dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
> +               return PTR_ERR(hw);
> +       }
> +       npcm8xx_clk_data->hws[NPCM8XX_CLK_AXI] = hw;
> +
> +       hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
> +                                              NPCM8XX_CLK_S_AXI, 0, 1, 2);
> +       if (IS_ERR(hw)) {
> +               dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
> +               return PTR_ERR(hw);
> +       }
> +       npcm8xx_clk_data->hws[NPCM8XX_CLK_ATB] = hw;
> +
> +       /* Register clock dividers specified in npcm8xx_divs */
> +       for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
> +               const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
> +
> +               hw = clk_hw_register_divider_parent_data(dev, div_data->name,

Do we have a devm_ variant of this function? If not, can you add it?

> +                                                        &div_data->parent_data,
> +                                                        div_data->flags,