From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759742AbZAGQmk (ORCPT ); Wed, 7 Jan 2009 11:42:40 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1759312AbZAGQlh (ORCPT ); Wed, 7 Jan 2009 11:41:37 -0500 Received: from mga03.intel.com ([143.182.124.21]:9389 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759214AbZAGQlg (ORCPT ); Wed, 7 Jan 2009 11:41:36 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.37,226,1231142400"; d="scan'208";a="97372426" Message-ID: <4964DB3E.6080908@intel.com> Date: Wed, 07 Jan 2009 09:41:34 -0700 From: Dan Williams User-Agent: Thunderbird 2.0.0.14 (Windows/20080421) MIME-Version: 1.0 To: Justin Piszcz CC: "linux-kernel@vger.kernel.org" , "lm-sensors@lm-sensors.org" Subject: Re: Status/support for Linux HECI from Intel? (for temp/voltage monitoring) References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Justin Piszcz wrote: > The HECI interface would allow lm_sensors developers to grab the > temperatures off the chips on the board. > > From 2005(?)-2008 there was some chatter about supporting it but it never > seemed to happen, is there any eventual planned support for supporting > Intel's HECI interface or if the user wants to see the > temperatures/voltages just buy a different motherboard with an ITE I/O > controller? > > I have a couple DG965WH boards and it would be nice to see the > temperature of the chipset etc without having to reboot into the BIOS. > Hi Justin, I am not up to date on the progress in this area, but perhaps this site (http://www.openamt.org/) has what you are looking for? Regards, Dan