From: Dieter Ries <clip2@gmx.de>
To: Mike Travis <travis@sgi.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>,
Ingo Molnar <mingo@elte.hu>,
rusty@rustcorp.com.au, linux-kernel@vger.kernel.org
Subject: Re: 2.6.29-rc1 does not boot
Date: Thu, 15 Jan 2009 22:03:50 +0100 [thread overview]
Message-ID: <496FA4B6.3000607@gmx.de> (raw)
In-Reply-To: <496F9604.8020101@sgi.com>
Mike Travis schrieb:
> Hi Dieter and Maciej,
Hi Mike,
>
> Can you try the attached patches on your system? It boots on my system fine
> now, but wasn't there a problem with resume as well? (My test systems are
> remote so suspending/resuming over the network is iffy.)
I just tested it. The kernel does boot up, suspending to ram works
perfectly, hibernating did also work, but I found an inconsistent lock
state in dmesg afterwards. System is still fully functional
May or may not be related, I don't know.
But the original problem is solved by your patches. Thank you!
[ 97.475165] =================================
[ 97.475165] [ INFO: inconsistent lock state ]
[ 97.475165] 2.6.29-rc1-00256-g0f0f4af #147
[ 97.475165] ---------------------------------
[ 97.475165] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
[ 97.475165] echo/5817 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 97.475165] (&cpu_base->lock){++..}, at: [<ffffffff8025b4fd>]
retrigger_next_event+0x7d/0xd0
[ 97.475165] {in-hardirq-W} state was registered at:
[ 97.475165] [<ffffffffffffffff>] 0xffffffffffffffff
[ 97.475165] irq event stamp: 88679
[ 97.475165] hardirqs last enabled at (88679): [<ffffffff8069be05>]
_spin_unlock_irqrestore+0x55/0x60
[ 97.475165] hardirqs last disabled at (88678): [<ffffffff8069bcac>]
_spin_lock_irqsave+0x1c/0x60
[ 97.475165] softirqs last enabled at (88466): [<ffffffff802478c2>]
__do_softirq+0x132/0x190
[ 97.475165] softirqs last disabled at (88461): [<ffffffff8020c97c>]
call_softirq+0x1c/0x40
[ 97.475165]
[ 97.475165] other info that might help us debug this:
[ 97.475165] 3 locks held by echo/5817:
[ 97.475165] #0: (&buffer->mutex){--..}, at: [<ffffffff8030dff3>]
sysfs_write_file+0x43/0x140
[ 97.475165] #1: (pm_mutex){--..}, at: [<ffffffff802755a5>]
enter_state+0x55/0x190
[ 97.475165] #2: (dpm_list_mtx){--..}, at: [<ffffffff80499212>]
device_pm_lock+0x12/0x20
[ 97.475165]
[ 97.475165] stack backtrace:
[ 97.475165] Pid: 5817, comm: echo Not tainted
2.6.29-rc1-00256-g0f0f4af #147
[ 97.475165] Call Trace:
[ 97.475165] [<ffffffff80266f86>] print_usage_bug+0x1a6/0x200
[ 97.475165] [<ffffffff80268647>] mark_lock+0xab7/0xe90
[ 97.475165] [<ffffffff8026ae8a>] __lock_acquire+0x80a/0xa50
[ 97.475165] [<ffffffff8026b128>] lock_acquire+0x58/0x80
[ 97.475165] [<ffffffff8025b4fd>] ? retrigger_next_event+0x7d/0xd0
[ 97.475165] [<ffffffff8069b8bc>] _spin_lock+0x2c/0x40
[ 97.475165] [<ffffffff8025b4fd>] ? retrigger_next_event+0x7d/0xd0
[ 97.475165] [<ffffffff8025b4fd>] retrigger_next_event+0x7d/0xd0
[ 97.475165] [<ffffffff8025b55b>] hres_timers_resume+0xb/0x10
[ 97.475165] [<ffffffff80260973>] timekeeping_resume+0xc3/0x100
[ 97.475165] [<ffffffff80493730>] __sysdev_resume+0x20/0x60
[ 97.475165] [<ffffffff804937ba>] sysdev_resume+0x4a/0x80
[ 97.475165] [<ffffffff80499db0>] device_power_up+0x10/0x20
[ 97.475165] [<ffffffff802754c8>] suspend_devices_and_enter+0x158/0x170
[ 97.475165] [<ffffffff802756a5>] enter_state+0x155/0x190
[ 97.475165] [<ffffffff8027578e>] state_store+0xae/0xe0
[ 97.475165] [<ffffffff804009e7>] kobj_attr_store+0x17/0x20
[ 97.475165] [<ffffffff8030e07e>] sysfs_write_file+0xce/0x140
[ 97.475165] [<ffffffff802bd4d7>] vfs_write+0xc7/0x170
[ 97.475165] [<ffffffff802bda90>] sys_write+0x50/0x90
[ 97.475165] [<ffffffff8020b81b>] system_call_fastpath+0x16/0x1b
>
> The patches apply to the latest tip/cpus4096 branch:
>
> http://people.redhat.com/mingo/tip.git/README
Thanks for that link. Could one of you hint me to some documentation
about what tip is? I searched a bit, but didn't find it.
>
> (They may apply to linux-next as well, I'm not sure.)
>
> Thanks!
> Mike
>
cu
Dieter
next prev parent reply other threads:[~2009-01-15 21:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-11 14:55 2.6.29-rc1 does not boot Dieter Ries
2009-01-11 15:19 ` Ingo Molnar
2009-01-11 15:30 ` Dieter Ries
2009-01-11 15:35 ` Ingo Molnar
2009-01-11 15:41 ` Dieter Ries
2009-01-11 18:50 ` Dieter Ries
2009-01-11 19:02 ` Mike Travis
2009-01-11 19:30 ` Dieter Ries
2009-01-12 10:00 ` Ingo Molnar
2009-01-12 17:53 ` Mike Travis
2009-01-12 18:55 ` Ingo Molnar
2009-01-15 0:54 ` Rusty Russell
2009-01-11 19:02 ` Ingo Molnar
2009-01-11 19:14 ` Mike Travis
2009-01-11 23:19 ` Mike Travis
2009-01-12 1:01 ` H. Peter Anvin
2009-01-12 11:22 ` Maciej Rutecki
2009-01-12 11:26 ` Ingo Molnar
2009-01-12 11:28 ` Maciej Rutecki
2009-01-12 12:10 ` Dieter Ries
2009-01-12 12:21 ` Ingo Molnar
2009-01-12 16:37 ` Dieter Ries
2009-01-12 18:59 ` Ingo Molnar
2009-01-13 4:45 ` Michal Jaegermann
2009-01-12 17:22 ` 2.6.29-rc1 does not boot and fails to resume Rafael J. Wysocki
2009-01-14 1:16 ` 2.6.29-rc1 does not boot Rusty Russell
2009-01-14 11:30 ` Ingo Molnar
2009-01-14 12:47 ` Dieter Ries
2009-01-15 20:01 ` Mike Travis
2009-01-15 21:03 ` Dieter Ries [this message]
2009-01-15 21:48 ` Maciej Rutecki
2009-01-15 21:54 ` Mike Travis
2009-01-15 23:04 ` Maciej Rutecki
2009-01-15 23:31 ` Mike Travis
2009-01-15 21:54 ` Mike Travis
2009-01-15 23:02 ` Dieter Ries
2009-01-15 23:30 ` Mike Travis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496FA4B6.3000607@gmx.de \
--to=clip2@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.rutecki@gmail.com \
--cc=mingo@elte.hu \
--cc=rusty@rustcorp.com.au \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox