2.6.29-rc1 Firefox crashing on page load

2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Hi,

This is the weirdest crash I've come across related to an rc kernel.
First I tested .29-rc1 when it came out and firefox crashed only when 
clicking on certain links.
Now I updated my tree and compiled another kernel. This time firefox 
crashes right after it finishes loading my homepage.
This happens every time, and has never happened on any kernel before.

I did a strace of firefox and these are the last few lines that are 
always present before it crashes:

gettimeofday({1232129663, 344658}, NULL) = 0
gettimeofday({1232129663, 351300}, NULL) = 0
open(\"/home/justin/.mailcap\", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No 
such file or directory)
time(NULL)                              = 1232129663
stat64(\"/home/justin/.gnome2/vfs/modules\", 0xbfec4efc) = -1 ENOENT (No 
such file or directory)
stat64(\"/etc/gnome-vfs-2.0/modules\", {st_mode=S_IFDIR|0755, 
st_size=128, ...}) = 0
geteuid32()                             = 1000
getegid32()                             = 1000
getuid32()                              = 1000
tgkill(4615, 4642, SIGRT_1upeek: ptrace(PTRACE_PEEKUSER,4615,44,0): No 
such process

So far I've tried other programs, but I haven't seen any other crashes.
More information about my computer (including: dmesg, config, sysinfo) 
can be found at:
http://jdserver.homelinux.org/bugreports/

Justin Madru

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Justin Madru wrote:
> Hi,
>
> This is the weirdest crash I've come across related to an rc kernel.
> First I tested .29-rc1 when it came out and firefox crashed only when 
> clicking on certain links.
> Now I updated my tree and compiled another kernel. This time firefox 
> crashes right after it finishes loading my homepage.
> This happens every time, and has never happened on any kernel before.
>
> I did a strace of firefox and these are the last few lines that are 
> always present before it crashes:
>
> gettimeofday({1232129663, 344658}, NULL) = 0
> gettimeofday({1232129663, 351300}, NULL) = 0
> open(\"/home/justin/.mailcap\", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No 
> such file or directory)
> time(NULL)                              = 1232129663
> stat64(\"/home/justin/.gnome2/vfs/modules\", 0xbfec4efc) = -1 ENOENT 
> (No such file or directory)
> stat64(\"/etc/gnome-vfs-2.0/modules\", {st_mode=S_IFDIR|0755, 
> st_size=128, ...}) = 0
> geteuid32()                             = 1000
> getegid32()                             = 1000
> getuid32()                              = 1000
> tgkill(4615, 4642, SIGRT_1upeek: ptrace(PTRACE_PEEKUSER,4615,44,0): No 
> such process
>
> So far I've tried other programs, but I haven't seen any other crashes.
> More information about my computer (including: dmesg, config, sysinfo) 
> can be found at:
> http://jdserver.homelinux.org/bugreports/
>
>
I just tested on -rc2 and still firefox crashes upon finishing loading 
the homepage.
I've not had this problem with a pre-29 kernel.

Justin Madru

Re: 2.6.29-rc1 Firefox crashing on page load

[John Stoffel]

Which version of Firefox are you running?  I just downgraded my CentOS
packaged firefox 3.0.5 back down to 3.0.4 because it was crapping out
on me all the time today.  

I'd suggest you check firefox and try a quick downgrade to see what
happens first.

John

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin P. Mattock]

Justin Madru wrote:
> Justin Madru wrote:
>> Hi,
>>
>> This is the weirdest crash I've come across related to an rc kernel.
>> First I tested .29-rc1 when it came out and firefox crashed only when 
>> clicking on certain links.
>> Now I updated my tree and compiled another kernel. This time firefox 
>> crashes right after it finishes loading my homepage.
>> This happens every time, and has never happened on any kernel before.
>>
>> I did a strace of firefox and these are the last few lines that are 
>> always present before it crashes:
>>
>> gettimeofday({1232129663, 344658}, NULL) = 0
>> gettimeofday({1232129663, 351300}, NULL) = 0
>> open(\"/home/justin/.mailcap\", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No 
>> such file or directory)
>> time(NULL)                              = 1232129663
>> stat64(\"/home/justin/.gnome2/vfs/modules\", 0xbfec4efc) = -1 ENOENT 
>> (No such file or directory)
>> stat64(\"/etc/gnome-vfs-2.0/modules\", {st_mode=S_IFDIR|0755, 
>> st_size=128, ...}) = 0
>> geteuid32()                             = 1000
>> getegid32()                             = 1000
>> getuid32()                              = 1000
>> tgkill(4615, 4642, SIGRT_1upeek: ptrace(PTRACE_PEEKUSER,4615,44,0): 
>> No such process
>>
>> So far I've tried other programs, but I haven't seen any other crashes.
>> More information about my computer (including: dmesg, config, 
>> sysinfo) can be found at:
>> http://jdserver.homelinux.org/bugreports/
>>
>>
> I just tested on -rc2 and still firefox crashes upon finishing loading 
> the homepage.
> I've not had this problem with a pre-29 kernel.
>
> Justin Madru
> -- 
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
I'm not seeing this with firefox over here.
The setup I have is the latest beta,
located in /usr/lib/firefox/ with a soft link to /usr/bin/
I don't have gnome2 vfs installed though.
just a bare firefox with 2 plugins(flash,null)
located in /.mozilla/plugins/
for restorecon.

not sure what distro you have, but with ubuntu
I noticed a quit a bit of other links created.
that is installing through apt-get, rather
just downloading the source and putting it wherever.

regards;

Justin P. Mattock

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Justin P. Mattock wrote:
> I'm not seeing this with firefox over here.
> The setup I have is the latest beta,
> located in /usr/lib/firefox/ with a soft link to /usr/bin/
> I don't have gnome2 vfs installed though.
> just a bare firefox with 2 plugins(flash,null)
> located in /.mozilla/plugins/
> for restorecon.
>
> not sure what distro you have, but with ubuntu
> I noticed a quit a bit of other links created.
> that is installing through apt-get, rather
> just downloading the source and putting it wherever.
>
> regards;
>
> Justin P. Mattock
>
I'm running ubuntu 8.10, with 2 custom kernels 2.6.28 and 2.6.29-rc2.

I've done a little bit more testing. This time with 4 version of firefox 
(3.0.5-ubuntu, 3.0.4, 3.1.b2, 3.2.a1) straight from mozilla.org, except 
the ubuntu one.
What I found is that all versions crash when loading iGoogle, sofar the 
only site that makes it crash, except 3.2a1.
Since iGoogle is my hompage, they all crash once loading is done (except 
3.2a1), unless I'm fast enough and load a different page.
But, _every_ version crashes if I go to Preferences->Main or 
Preferences->Applications.

None of this crashing happens if I'm booted into a .28 kernel, only on a 
.29-rc kernel.
Henceforth, I still think it's a kernel regression, but one that's going 
to be almost impossible to debug!
I've hit the most narrow minded bug on the planet! Very sad....
Seems like I always hit the undebugable regressions that nobody else 
sees ;-(

Justin Madru

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin P. Mattock]

Justin Madru wrote:
> Justin P. Mattock wrote:
>> I'm not seeing this with firefox over here.
>> The setup I have is the latest beta,
>> located in /usr/lib/firefox/ with a soft link to /usr/bin/
>> I don't have gnome2 vfs installed though.
>> just a bare firefox with 2 plugins(flash,null)
>> located in /.mozilla/plugins/
>> for restorecon.
>>
>> not sure what distro you have, but with ubuntu
>> I noticed a quit a bit of other links created.
>> that is installing through apt-get, rather
>> just downloading the source and putting it wherever.
>>
>> regards;
>>
>> Justin P. Mattock
>>
> I'm running ubuntu 8.10, with 2 custom kernels 2.6.28 and 2.6.29-rc2.
>
> I've done a little bit more testing. This time with 4 version of 
> firefox (3.0.5-ubuntu, 3.0.4, 3.1.b2, 3.2.a1) straight from 
> mozilla.org, except the ubuntu one.
> What I found is that all versions crash when loading iGoogle, sofar 
> the only site that makes it crash, except 3.2a1.
> Since iGoogle is my hompage, they all crash once loading is done 
> (except 3.2a1), unless I'm fast enough and load a different page.
> But, _every_ version crashes if I go to Preferences->Main or 
> Preferences->Applications.
>
> None of this crashing happens if I'm booted into a .28 kernel, only on 
> a .29-rc kernel.
> Henceforth, I still think it's a kernel regression, but one that's 
> going to be almost impossible to debug!
> I've hit the most narrow minded bug on the planet! Very sad....
> Seems like I always hit the undebugable regressions that nobody else 
> sees ;-(
>
> Justin Madru
>
what happens when you download the source?
then once unpacked issue ./firefox
just to see what happens without any plugins/apps.

over here I have the beta no apps
basically as light as possible just flash
(since all web sites use that.)

I did have a crash though,
but was due to me not allowing
an allow rule for SELinux(too lazy at the moment);
but besides any allow rules I'm not having any issues.
(knock on wood).

you can also try renaming gnome2 gconf  and
.mozilla just to see

regards;

Justin P. Mattock

Re: 2.6.29-rc1 Firefox crashing on page load

[Jesper Juhl]

On Sat, 17 Jan 2009, Justin Madru wrote:

> Justin P. Mattock wrote:
> > I'm not seeing this with firefox over here.
> > The setup I have is the latest beta,
> > located in /usr/lib/firefox/ with a soft link to /usr/bin/
> > I don't have gnome2 vfs installed though.
> > just a bare firefox with 2 plugins(flash,null)
> > located in /.mozilla/plugins/
> > for restorecon.
> > 
> > not sure what distro you have, but with ubuntu
> > I noticed a quit a bit of other links created.
> > that is installing through apt-get, rather
> > just downloading the source and putting it wherever.
> > 
> > regards;
> > 
> > Justin P. Mattock
> > 
> I'm running ubuntu 8.10, with 2 custom kernels 2.6.28 and 2.6.29-rc2.
> 
> I've done a little bit more testing. This time with 4 version of firefox
> (3.0.5-ubuntu, 3.0.4, 3.1.b2, 3.2.a1) straight from mozilla.org, except the
> ubuntu one.
> What I found is that all versions crash when loading iGoogle, sofar the only
> site that makes it crash, except 3.2a1.
> Since iGoogle is my hompage, they all crash once loading is done (except
> 3.2a1), unless I'm fast enough and load a different page.
> But, _every_ version crashes if I go to Preferences->Main or
> Preferences->Applications.
> 
> None of this crashing happens if I'm booted into a .28 kernel, only on a
> .29-rc kernel.
> Henceforth, I still think it's a kernel regression, but one that's going to be
> almost impossible to debug!
> I've hit the most narrow minded bug on the planet! Very sad....
> Seems like I always hit the undebugable regressions that nobody else sees ;-(
> 
Not impossible to debug, just tedious.

You could always try a git bisect with
"git bisect good v2.6.28; git bisect bad v2.6.29-rc2" and try to narrow 
the breakage down to a single commit. You have a very reproducible 
test case which makes it a lot easier.

Btw;

 - are there any messages in dmesg after a firefox crash that provide a 
hint?

- have you tried building a 2.6.29-rc2 kernel with all (or at least most) 
of the debug options in "Kernel hacking" enabled? Enabling those options 
does slow your kernel down, but they may be able to point a finger at 
what's going wrong, so it's worth a try IMHO.

-- 
Jesper Juhl <jj@chaosbits.net>        http://personal.chaosbits.net/
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Ok, more preliminary testing has returned that at least in the case of 
the iGoogle page crashing, it's related to google talk.
Because right after it connects to the google talk server the crash happens.
And why it doesn't crash on firefox 3.2 is because for some reason the 
talk feature doesn't load on that version of firefox.
I still get the crashes when going to Preferences->Main or 
Preferences->Applications.

I tried the suggested moving of .gconf* .gnome* .mozilla*
The only thing that did was make firefox crash when going to Preference.
I did not try compiling firefox from source, but I did test with the 
binaries straight from mozilla.
I also tried disabling any plugin/extention (I only have flash and 
AdBlockerPlus), but no change.

Jesper Juhl wrote:
> Not impossible to debug, just tedious.
>
> You could always try a git bisect with
> "git bisect good v2.6.28; git bisect bad v2.6.29-rc2" and try to narrow 
> the breakage down to a single commit. You have a very reproducible 
> test case which makes it a lot easier.
>
> Btw;
>
>  - are there any messages in dmesg after a firefox crash that provide a 
> hint?
>
> - have you tried building a 2.6.29-rc2 kernel with all (or at least most) 
> of the debug options in "Kernel hacking" enabled? Enabling those options 
> does slow your kernel down, but they may be able to point a finger at 
> what's going wrong, so it's worth a try IMHO.

There are no messages in the log files. I think I'll try a git bisect.
But before I do could the problem be related to a change in the kernel 
config?
I did make a few changes, removing some seemingly unnecessary modules 
that I had.
This is the diff, anything stand out? Anything related to connecting 
with the google talk server?

--- /boot/config-2.6.28-git    2008-12-25 16:41:26.000000000 -0800
+++ /boot/config-2.6.29-rc2-git    2009-01-16 13:59:19.000000000 -0800
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-git
-# Thu Dec 25 16:41:26 2008
+# Linux kernel version: 2.6.29-rc2-git
+# Fri Jan 16 13:59:19 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -71,9 +71,9 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
@@ -90,6 +90,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -113,6 +114,7 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 # CONFIG_OPROFILE_IBS is not set
@@ -126,7 +128,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,12 +135,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +155,11 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_FREEZER=y
 
 #
@@ -166,6 +170,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_X86_MPPARSE is not set
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
@@ -173,7 +178,7 @@ CONFIG_X86_PC=y
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
@@ -223,31 +228,29 @@ CONFIG_CPU_SUP_CENTAUR_32=y
 CONFIG_CPU_SUP_TRANSMETA_32=y
 CONFIG_CPU_SUP_UMC_32=y
 # CONFIG_X86_DS is not set
+# CONFIG_X86_PTRACE_BTS is not set
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_IOMMU_API is not set
 CONFIG_NR_CPUS=4
 # CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-# CONFIG_RCU_TRACE is not set
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
+# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
 CONFIG_X86_MCE=y
 # CONFIG_X86_MCE_NONFATAL is not set
 # CONFIG_X86_MCE_P4THERMAL is not set
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
-CONFIG_I8K=m
+# CONFIG_I8K is not set
 # CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_MICROCODE=m
-CONFIG_MICROCODE_INTEL=y
-# CONFIG_MICROCODE_AMD is not set
-CONFIG_MICROCODE_OLD_INTERFACE=y
+# CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=m
 CONFIG_X86_CPUID=m
 # CONFIG_NOHIGHMEM is not set
@@ -273,7 +276,6 @@ CONFIG_SPARSEMEM_STATIC=y
 #
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -327,15 +329,12 @@ CONFIG_ACPI_SYSFS_POWER=y
 CONFIG_ACPI_AC=m
 CONFIG_ACPI_BATTERY=m
 CONFIG_ACPI_BUTTON=m
-# CONFIG_ACPI_VIDEO is not set
+CONFIG_ACPI_VIDEO=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_DOCK=y
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
 # CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=2001
 # CONFIG_ACPI_DEBUG is not set
@@ -412,6 +411,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HT_IRQ is not set
 CONFIG_ISA_DMA_API=y
 # CONFIG_ISA is not set
@@ -435,6 +435,8 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -515,6 +517,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -528,24 +531,26 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=m
 # CONFIG_NET_9P is not set
@@ -606,7 +611,7 @@ CONFIG_CHR_DEV_SG=m
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_WAIT_SCAN=m
@@ -727,29 +732,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_NET_PCI is not set
 CONFIG_B44=y
 CONFIG_B44_PCI_AUTOSELECT=y
 CONFIG_B44_PCICORE_AUTOSELECT=y
 CONFIG_B44_PCI=y
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -760,8 +747,6 @@ CONFIG_B44_PCI=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
@@ -777,6 +762,8 @@ CONFIG_WLAN_80211=y
 # CONFIG_P54_COMMON is not set
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 CONFIG_IWLWIFI=m
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
@@ -793,6 +780,10 @@ CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
 # CONFIG_RT2X00 is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -828,7 +819,7 @@ CONFIG_INPUT=y
 CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=800
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
@@ -896,6 +887,7 @@ CONFIG_FIX_EARLYCON_MEM=y
 #
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -917,7 +909,81 @@ CONFIG_HPET_MMAP=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
@@ -926,6 +992,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
@@ -949,7 +1016,12 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -993,19 +1065,78 @@ CONFIG_DRM=y
 # CONFIG_DRM_I810 is not set
 # CONFIG_DRM_I830 is not set
 CONFIG_DRM_I915=m
+# CONFIG_DRM_I915_KMS is not set
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_LE80578 is not set
+CONFIG_FB_INTEL=m
+# CONFIG_FB_INTEL_DEBUG is not set
+CONFIG_FB_INTEL_I2C=y
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=m
 # CONFIG_BACKLIGHT_PROGEAR is not set
 # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 # CONFIG_BACKLIGHT_SAHARA is not set
@@ -1026,12 +1157,15 @@ CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
+CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=m
 CONFIG_SND_HWDEP=m
+CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
 # CONFIG_SND_SEQ_DUMMY is not set
 CONFIG_SND_OSSEMUL=y
@@ -1039,8 +1173,9 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
@@ -1095,6 +1230,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_FM801 is not set
 CONFIG_SND_HDA_INTEL=m
 CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
 # CONFIG_SND_HDA_INPUT_BEEP is not set
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
@@ -1102,6 +1238,8 @@ CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_ATIHDMI=y
 CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_HDA_CODEC_CMEDIA=y
 # CONFIG_SND_HDA_CODEC_SI3054 is not set
@@ -1148,23 +1286,15 @@ CONFIG_USB_HID=m
 # CONFIG_USB_HIDDEV is not set
 
 #
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
 # Special HID drivers
 #
 # CONFIG_HID_COMPAT is not set
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
@@ -1172,12 +1302,15 @@ CONFIG_HID_LOGITECH=m
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
 CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=m
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1207,6 +1340,7 @@ CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1240,7 +1374,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1288,6 +1421,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -1305,7 +1442,8 @@ CONFIG_SDIO_UART=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=m
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MMC_TIFM_SD is not set
 # CONFIG_MEMSTICK is not set
@@ -1330,6 +1468,7 @@ CONFIG_NET_DMA=y
 CONFIG_DCA=m
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
 
 #
 # Firmware Drivers
@@ -1355,6 +1494,7 @@ CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
@@ -1367,6 +1507,7 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1409,26 +1550,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1519,7 +1641,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1553,6 +1675,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1561,9 +1684,15 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -1575,7 +1704,10 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
 # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
@@ -1606,6 +1738,7 @@ CONFIG_IO_DELAY_TYPE_NONE=3
 # CONFIG_IO_DELAY_UDELAY is not set
 CONFIG_IO_DELAY_NONE=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=3
+# CONFIG_DEBUG_BOOT_PARAMS is not set
 # CONFIG_CPA_DEBUG is not set
 CONFIG_OPTIMIZE_INLINING=y
 
@@ -1621,7 +1754,7 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-CONFIG_CRYPTO_FIPS=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
@@ -1630,91 +1763,89 @@ CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=m
 CONFIG_CRYPTO_MANAGER=m
 CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
 #
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
 
 #
 # Block modes
 #
 CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
 CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CRC32C_INTEL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
 CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_AES_586=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SALSA20_586=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_TWOFISH_586=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
 
 #
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_LZO is not set
 
 #
 # Random Number Generation
 #
-CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_HAVE_KVM=y
 # CONFIG_VIRTUALIZATION is not set
@@ -1725,17 +1856,16 @@ CONFIG_HAVE_KVM=y
 CONFIG_BITREVERSE=m
 CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

Justin Madru

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin P. Mattock]

Justin Madru wrote:
> Ok, more preliminary testing has returned that at least in the case of 
> the iGoogle page crashing, it's related to google talk.
> Because right after it connects to the google talk server the crash 
> happens.
> And why it doesn't crash on firefox 3.2 is because for some reason the 
> talk feature doesn't load on that version of firefox.
> I still get the crashes when going to Preferences->Main or 
> Preferences->Applications.
>
> I tried the suggested moving of .gconf* .gnome* .mozilla*
> The only thing that did was make firefox crash when going to Preference.
> I did not try compiling firefox from source, but I did test with the 
> binaries straight from mozilla.
> I also tried disabling any plugin/extention (I only have flash and 
> AdBlockerPlus), but no change.
>
What I should of said, is to maybe uninstall/disable any of those apps 
or plugins
that are automatically triggered when loading firefox.
(although renaming some of  the  .* files is good, freshens it up); 

So when you don't go to google talk you can surf?

> Jesper Juhl wrote:
>> Not impossible to debug, just tedious.
>>
>> You could always try a git bisect with
>> "git bisect good v2.6.28; git bisect bad v2.6.29-rc2" and try to 
>> narrow the breakage down to a single commit. You have a very 
>> reproducible test case which makes it a lot easier.
>>
>> Btw;
>>
>>  - are there any messages in dmesg after a firefox crash that provide 
>> a hint?
>>
>> - have you tried building a 2.6.29-rc2 kernel with all (or at least 
>> most) of the debug options in "Kernel hacking" enabled? Enabling 
>> those options does slow your kernel down, but they may be able to 
>> point a finger at what's going wrong, so it's worth a try IMHO.
>
> There are no messages in the log files. I think I'll try a git bisect.
> But before I do could the problem be related to a change in the kernel 
> config?
> I did make a few changes, removing some seemingly unnecessary modules 
> that I had.
> This is the diff, anything stand out? Anything related to connecting 
> with the google talk server?
>
> --- /boot/config-2.6.28-git    2008-12-25 16:41:26.000000000 -0800
> +++ /boot/config-2.6.29-rc2-git    2009-01-16 13:59:19.000000000 -0800
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.28-git
> -# Thu Dec 25 16:41:26 2008
> +# Linux kernel version: 2.6.29-rc2-git
> +# Fri Jan 16 13:59:19 2009
> #
> # CONFIG_64BIT is not set
> CONFIG_X86_32=y
> @@ -71,9 +71,9 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_LOG_BUF_SHIFT=16
> -# CONFIG_CGROUPS is not set
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> # CONFIG_GROUP_SCHED is not set
> +# CONFIG_CGROUPS is not set
> # CONFIG_SYSFS_DEPRECATED_V2 is not set
> # CONFIG_RELAY is not set
> CONFIG_NAMESPACES=y
> @@ -90,6 +90,7 @@ CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> +CONFIG_KALLSYMS_STRIP_GENERATED=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> @@ -113,6 +114,7 @@ CONFIG_SLUB_DEBUG=y
> CONFIG_SLUB=y
> # CONFIG_SLOB is not set
> CONFIG_PROFILING=y
> +CONFIG_TRACEPOINTS=y
> # CONFIG_MARKERS is not set
> CONFIG_OPROFILE=m
> # CONFIG_OPROFILE_IBS is not set
> @@ -126,7 +128,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> -# CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> @@ -134,12 +135,10 @@ CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> -CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> # CONFIG_LBD is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> -# CONFIG_LSF is not set
> CONFIG_BLK_DEV_BSG=y
> # CONFIG_BLK_DEV_INTEGRITY is not set
>
> @@ -156,6 +155,11 @@ CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> # CONFIG_CLASSIC_RCU is not set
> +# CONFIG_TREE_RCU is not set
> +CONFIG_PREEMPT_RCU=y
> +# CONFIG_RCU_TRACE is not set
> +# CONFIG_TREE_RCU_TRACE is not set
> +# CONFIG_PREEMPT_RCU_TRACE is not set
> CONFIG_FREEZER=y
>
> #
> @@ -166,6 +170,7 @@ CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> +CONFIG_SPARSE_IRQ=y
> # CONFIG_X86_MPPARSE is not set
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> @@ -173,7 +178,7 @@ CONFIG_X86_PC=y
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_VSMP is not set
> # CONFIG_X86_RDC321X is not set
> -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
> +CONFIG_SCHED_OMIT_FRAME_POINTER=y
> # CONFIG_PARAVIRT_GUEST is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> @@ -223,31 +228,29 @@ CONFIG_CPU_SUP_CENTAUR_32=y
> CONFIG_CPU_SUP_TRANSMETA_32=y
> CONFIG_CPU_SUP_UMC_32=y
> # CONFIG_X86_DS is not set
> +# CONFIG_X86_PTRACE_BTS is not set
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> # CONFIG_IOMMU_HELPER is not set
> +# CONFIG_IOMMU_API is not set
> CONFIG_NR_CPUS=4
> # CONFIG_SCHED_SMT is not set
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> -CONFIG_PREEMPT_RCU=y
> -# CONFIG_RCU_TRACE is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> +# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> CONFIG_X86_MCE=y
> # CONFIG_X86_MCE_NONFATAL is not set
> # CONFIG_X86_MCE_P4THERMAL is not set
> CONFIG_VM86=y
> # CONFIG_TOSHIBA is not set
> -CONFIG_I8K=m
> +# CONFIG_I8K is not set
> # CONFIG_X86_REBOOTFIXUPS is not set
> -CONFIG_MICROCODE=m
> -CONFIG_MICROCODE_INTEL=y
> -# CONFIG_MICROCODE_AMD is not set
> -CONFIG_MICROCODE_OLD_INTERFACE=y
> +# CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=m
> CONFIG_X86_CPUID=m
> # CONFIG_NOHIGHMEM is not set
> @@ -273,7 +276,6 @@ CONFIG_SPARSEMEM_STATIC=y
> #
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> -CONFIG_RESOURCES_64BIT=y
> # CONFIG_PHYS_ADDR_T_64BIT is not set
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> @@ -327,15 +329,12 @@ CONFIG_ACPI_SYSFS_POWER=y
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> -# CONFIG_ACPI_VIDEO is not set
> +CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=m
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_PROCESSOR=m
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=m
> -# CONFIG_ACPI_WMI is not set
> -# CONFIG_ACPI_ASUS is not set
> -# CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=2001
> # CONFIG_ACPI_DEBUG is not set
> @@ -412,6 +411,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_LEGACY is not set
> # CONFIG_PCI_DEBUG is not set
> +# CONFIG_PCI_STUB is not set
> # CONFIG_HT_IRQ is not set
> CONFIG_ISA_DMA_API=y
> # CONFIG_ISA is not set
> @@ -435,6 +435,8 @@ CONFIG_NET=y
> #
> # Networking options
> #
> +# CONFIG_NET_NS is not set
> +CONFIG_COMPAT_NET_DEV_OPS=y
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> @@ -515,6 +517,7 @@ CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_SCHED is not set
> +# CONFIG_DCB is not set
>
> #
> # Network testing
> @@ -528,24 +531,26 @@ CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_PHONET is not set
> CONFIG_WIRELESS=y
> CONFIG_CFG80211=y
> +# CONFIG_CFG80211_REG_DEBUG is not set
> CONFIG_NL80211=y
> # CONFIG_WIRELESS_OLD_REGULATORY is not set
> CONFIG_WIRELESS_EXT=y
> CONFIG_WIRELESS_EXT_SYSFS=y
> +CONFIG_LIB80211=y
> CONFIG_MAC80211=m
>
> #
> # Rate control algorithm selection
> #
> -CONFIG_MAC80211_RC_PID=y
> CONFIG_MAC80211_RC_MINSTREL=y
> # CONFIG_MAC80211_RC_DEFAULT_PID is not set
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel"
> # CONFIG_MAC80211_MESH is not set
> # CONFIG_MAC80211_LEDS is not set
> +# CONFIG_MAC80211_DEBUGFS is not set
> # CONFIG_MAC80211_DEBUG_MENU is not set
> -# CONFIG_IEEE80211 is not set
> +# CONFIG_WIMAX is not set
> CONFIG_RFKILL=m
> CONFIG_RFKILL_INPUT=m
> # CONFIG_NET_9P is not set
> @@ -606,7 +611,7 @@ CONFIG_CHR_DEV_SG=m
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> -# CONFIG_SCSI_CONSTANTS is not set
> +CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
> CONFIG_SCSI_SCAN_ASYNC=y
> CONFIG_SCSI_WAIT_SCAN=m
> @@ -727,29 +732,11 @@ CONFIG_MII=y
> # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> -CONFIG_NET_PCI=y
> -# CONFIG_PCNET32 is not set
> -# CONFIG_AMD8111_ETH is not set
> -# CONFIG_ADAPTEC_STARFIRE is not set
> +# CONFIG_NET_PCI is not set
> CONFIG_B44=y
> CONFIG_B44_PCI_AUTOSELECT=y
> CONFIG_B44_PCICORE_AUTOSELECT=y
> CONFIG_B44_PCI=y
> -# CONFIG_FORCEDETH is not set
> -# CONFIG_EEPRO100 is not set
> -# CONFIG_E100 is not set
> -# CONFIG_FEALNX is not set
> -# CONFIG_NATSEMI is not set
> -# CONFIG_NE2K_PCI is not set
> -# CONFIG_8139CP is not set
> -# CONFIG_8139TOO is not set
> -# CONFIG_R6040 is not set
> -# CONFIG_SIS900 is not set
> -# CONFIG_EPIC100 is not set
> -# CONFIG_SUNDANCE is not set
> -# CONFIG_TLAN is not set
> -# CONFIG_VIA_RHINE is not set
> -# CONFIG_SC92031 is not set
> # CONFIG_ATL2 is not set
> # CONFIG_NETDEV_1000 is not set
> # CONFIG_NETDEV_10000 is not set
> @@ -760,8 +747,6 @@ CONFIG_B44_PCI=y
> #
> # CONFIG_WLAN_PRE80211 is not set
> CONFIG_WLAN_80211=y
> -# CONFIG_IPW2100 is not set
> -# CONFIG_IPW2200 is not set
> # CONFIG_LIBERTAS is not set
> # CONFIG_LIBERTAS_THINFIRM is not set
> # CONFIG_AIRO is not set
> @@ -777,6 +762,8 @@ CONFIG_WLAN_80211=y
> # CONFIG_P54_COMMON is not set
> # CONFIG_ATH5K is not set
> # CONFIG_ATH9K is not set
> +# CONFIG_IPW2100 is not set
> +# CONFIG_IPW2200 is not set
> CONFIG_IWLWIFI=m
> # CONFIG_IWLCORE is not set
> # CONFIG_IWLWIFI_LEDS is not set
> @@ -793,6 +780,10 @@ CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
> # CONFIG_RT2X00 is not set
>
> #
> +# Enable WiMAX (Networking options) to see the WiMAX drivers
> +#
> +
> +#
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> @@ -828,7 +819,7 @@ CONFIG_INPUT=y
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
> -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=800
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
> @@ -896,6 +887,7 @@ CONFIG_FIX_EARLYCON_MEM=y
> #
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_IPMI_HANDLER is not set
> # CONFIG_HW_RANDOM is not set
> @@ -917,7 +909,81 @@ CONFIG_HPET_MMAP=y
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> -# CONFIG_I2C is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_BOARDINFO=y
> +# CONFIG_I2C_CHARDEV is not set
> +# CONFIG_I2C_HELPER_AUTO is not set
> +
> +#
> +# I2C Algorithms
> +#
> +CONFIG_I2C_ALGOBIT=y
> +# CONFIG_I2C_ALGOPCF is not set
> +# CONFIG_I2C_ALGOPCA is not set
> +
> +#
> +# I2C Hardware Bus support
> +#
> +
> +#
> +# PC SMBus host controller drivers
> +#
> +# CONFIG_I2C_ALI1535 is not set
> +# CONFIG_I2C_ALI1563 is not set
> +# CONFIG_I2C_ALI15X3 is not set
> +# CONFIG_I2C_AMD756 is not set
> +# CONFIG_I2C_AMD8111 is not set
> +CONFIG_I2C_I801=m
> +CONFIG_I2C_ISCH=m
> +# CONFIG_I2C_PIIX4 is not set
> +# CONFIG_I2C_NFORCE2 is not set
> +# CONFIG_I2C_SIS5595 is not set
> +# CONFIG_I2C_SIS630 is not set
> +# CONFIG_I2C_SIS96X is not set
> +# CONFIG_I2C_VIA is not set
> +# CONFIG_I2C_VIAPRO is not set
> +
> +#
> +# I2C system bus drivers (mostly embedded / system-on-chip)
> +#
> +# CONFIG_I2C_OCORES is not set
> +# CONFIG_I2C_SIMTEC is not set
> +
> +#
> +# External I2C/SMBus adapter drivers
> +#
> +# CONFIG_I2C_PARPORT_LIGHT is not set
> +# CONFIG_I2C_TAOS_EVM is not set
> +# CONFIG_I2C_TINY_USB is not set
> +
> +#
> +# Graphics adapter I2C/DDC channel drivers
> +#
> +# CONFIG_I2C_VOODOO3 is not set
> +
> +#
> +# Other I2C/SMBus bus drivers
> +#
> +# CONFIG_I2C_PCA_PLATFORM is not set
> +# CONFIG_I2C_STUB is not set
> +# CONFIG_SCx200_ACB is not set
> +
> +#
> +# Miscellaneous I2C Chip support
> +#
> +# CONFIG_DS1682 is not set
> +# CONFIG_AT24 is not set
> +# CONFIG_SENSORS_EEPROM is not set
> +# CONFIG_SENSORS_PCF8574 is not set
> +# CONFIG_PCF8575 is not set
> +# CONFIG_SENSORS_PCA9539 is not set
> +# CONFIG_SENSORS_PCF8591 is not set
> +# CONFIG_SENSORS_MAX6875 is not set
> +# CONFIG_SENSORS_TSL2550 is not set
> +# CONFIG_I2C_DEBUG_CORE is not set
> +# CONFIG_I2C_DEBUG_ALGO is not set
> +# CONFIG_I2C_DEBUG_BUS is not set
> +# CONFIG_I2C_DEBUG_CHIP is not set
> # CONFIG_SPI is not set
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> # CONFIG_GPIOLIB is not set
> @@ -926,6 +992,7 @@ CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> +# CONFIG_BATTERY_BQ27x00 is not set
> # CONFIG_HWMON is not set
> CONFIG_THERMAL=y
> # CONFIG_WATCHDOG is not set
> @@ -949,7 +1016,12 @@ CONFIG_SSB_DRIVER_PCICORE=y
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> +# CONFIG_TWL4030_CORE is not set
> # CONFIG_MFD_TMIO is not set
> +# CONFIG_PMIC_DA903X is not set
> +# CONFIG_MFD_WM8400 is not set
> +# CONFIG_MFD_WM8350_I2C is not set
> +# CONFIG_MFD_PCF50633 is not set
> CONFIG_REGULATOR=y
> # CONFIG_REGULATOR_DEBUG is not set
> # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
> @@ -993,19 +1065,78 @@ CONFIG_DRM=y
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> CONFIG_DRM_I915=m
> +# CONFIG_DRM_I915_KMS is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=m
> -# CONFIG_FB is not set
> +CONFIG_FB=m
> +# CONFIG_FIRMWARE_EDID is not set
> +CONFIG_FB_DDC=m
> +CONFIG_FB_BOOT_VESA_SUPPORT=y
> +CONFIG_FB_CFB_FILLRECT=m
> +CONFIG_FB_CFB_COPYAREA=m
> +CONFIG_FB_CFB_IMAGEBLIT=m
> +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> +# CONFIG_FB_SYS_FILLRECT is not set
> +# CONFIG_FB_SYS_COPYAREA is not set
> +# CONFIG_FB_SYS_IMAGEBLIT is not set
> +# CONFIG_FB_FOREIGN_ENDIAN is not set
> +# CONFIG_FB_SYS_FOPS is not set
> +# CONFIG_FB_SVGALIB is not set
> +# CONFIG_FB_MACMODES is not set
> +# CONFIG_FB_BACKLIGHT is not set
> +CONFIG_FB_MODE_HELPERS=y
> +# CONFIG_FB_TILEBLITTING is not set
> +
> +#
> +# Frame buffer hardware drivers
> +#
> +# CONFIG_FB_CIRRUS is not set
> +# CONFIG_FB_PM2 is not set
> +# CONFIG_FB_CYBER2000 is not set
> +# CONFIG_FB_ARC is not set
> +# CONFIG_FB_VGA16 is not set
> +# CONFIG_FB_N411 is not set
> +# CONFIG_FB_HGA is not set
> +# CONFIG_FB_S1D13XXX is not set
> +# CONFIG_FB_NVIDIA is not set
> +# CONFIG_FB_RIVA is not set
> +# CONFIG_FB_I810 is not set
> +# CONFIG_FB_LE80578 is not set
> +CONFIG_FB_INTEL=m
> +# CONFIG_FB_INTEL_DEBUG is not set
> +CONFIG_FB_INTEL_I2C=y
> +# CONFIG_FB_MATROX is not set
> +# CONFIG_FB_RADEON is not set
> +# CONFIG_FB_ATY128 is not set
> +# CONFIG_FB_ATY is not set
> +# CONFIG_FB_S3 is not set
> +# CONFIG_FB_SAVAGE is not set
> +# CONFIG_FB_SIS is not set
> +# CONFIG_FB_VIA is not set
> +# CONFIG_FB_NEOMAGIC is not set
> +# CONFIG_FB_KYRO is not set
> +# CONFIG_FB_3DFX is not set
> +# CONFIG_FB_VOODOO1 is not set
> +# CONFIG_FB_VT8623 is not set
> +# CONFIG_FB_CYBLA is not set
> +# CONFIG_FB_TRIDENT is not set
> +# CONFIG_FB_ARK is not set
> +# CONFIG_FB_PM3 is not set
> +# CONFIG_FB_CARMINE is not set
> +# CONFIG_FB_GEODE is not set
> +# CONFIG_FB_VIRTUAL is not set
> +# CONFIG_FB_METRONOME is not set
> +# CONFIG_FB_MB862XX is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> # CONFIG_LCD_ILI9320 is not set
> CONFIG_LCD_PLATFORM=m
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> -# CONFIG_BACKLIGHT_CORGI is not set
> +CONFIG_BACKLIGHT_GENERIC=m
> # CONFIG_BACKLIGHT_PROGEAR is not set
> # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
> # CONFIG_BACKLIGHT_SAHARA is not set
> @@ -1026,12 +1157,15 @@ CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
> CONFIG_DUMMY_CONSOLE=y
> +# CONFIG_FRAMEBUFFER_CONSOLE is not set
> +# CONFIG_LOGO is not set
> CONFIG_SOUND=y
> CONFIG_SOUND_OSS_CORE=y
> CONFIG_SND=y
> -CONFIG_SND_TIMER=m
> +CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=m
> CONFIG_SND_HWDEP=m
> +CONFIG_SND_JACK=y
> CONFIG_SND_SEQUENCER=m
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> @@ -1039,8 +1173,9 @@ CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> +CONFIG_SND_HRTIMER=y
> +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
> CONFIG_SND_RTCTIMER=m
> -CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> # CONFIG_SND_DYNAMIC_MINORS is not set
> # CONFIG_SND_SUPPORT_OLD_API is not set
> # CONFIG_SND_VERBOSE_PROCFS is not set
> @@ -1095,6 +1230,7 @@ CONFIG_SND_PCI=y
> # CONFIG_SND_FM801 is not set
> CONFIG_SND_HDA_INTEL=m
> CONFIG_SND_HDA_HWDEP=y
> +CONFIG_SND_HDA_RECONFIG=y
> # CONFIG_SND_HDA_INPUT_BEEP is not set
> CONFIG_SND_HDA_CODEC_REALTEK=y
> CONFIG_SND_HDA_CODEC_ANALOG=y
> @@ -1102,6 +1238,8 @@ CONFIG_SND_HDA_CODEC_SIGMATEL=y
> CONFIG_SND_HDA_CODEC_VIA=y
> CONFIG_SND_HDA_CODEC_ATIHDMI=y
> CONFIG_SND_HDA_CODEC_NVHDMI=y
> +CONFIG_SND_HDA_CODEC_INTELHDMI=y
> +CONFIG_SND_HDA_ELD=y
> CONFIG_SND_HDA_CODEC_CONEXANT=y
> CONFIG_SND_HDA_CODEC_CMEDIA=y
> # CONFIG_SND_HDA_CODEC_SI3054 is not set
> @@ -1148,23 +1286,15 @@ CONFIG_USB_HID=m
> # CONFIG_USB_HIDDEV is not set
>
> #
> -# USB HID Boot Protocol drivers
> -#
> -# CONFIG_USB_KBD is not set
> -# CONFIG_USB_MOUSE is not set
> -
> -#
> # Special HID drivers
> #
> # CONFIG_HID_COMPAT is not set
> CONFIG_HID_A4TECH=m
> CONFIG_HID_APPLE=m
> CONFIG_HID_BELKIN=m
> -CONFIG_HID_BRIGHT=m
> CONFIG_HID_CHERRY=m
> CONFIG_HID_CHICONY=m
> CONFIG_HID_CYPRESS=m
> -CONFIG_HID_DELL=m
> CONFIG_HID_EZKEY=m
> CONFIG_HID_GYRATION=m
> CONFIG_HID_LOGITECH=m
> @@ -1172,12 +1302,15 @@ CONFIG_HID_LOGITECH=m
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> CONFIG_HID_MICROSOFT=m
> CONFIG_HID_MONTEREY=m
> +CONFIG_HID_NTRIG=m
> CONFIG_HID_PANTHERLORD=m
> # CONFIG_PANTHERLORD_FF is not set
> CONFIG_HID_PETALYNX=m
> CONFIG_HID_SAMSUNG=m
> CONFIG_HID_SONY=m
> CONFIG_HID_SUNPLUS=m
> +# CONFIG_GREENASIA_FF is not set
> +CONFIG_HID_TOPSEED=m
> # CONFIG_THRUSTMASTER_FF is not set
> # CONFIG_ZEROPLUS_FF is not set
> CONFIG_USB_SUPPORT=y
> @@ -1207,6 +1340,7 @@ CONFIG_USB_SUSPEND=y
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> +# CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> @@ -1240,7 +1374,6 @@ CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> -# CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> @@ -1288,6 +1421,10 @@ CONFIG_USB_STORAGE=m
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_VST is not set
> # CONFIG_USB_GADGET is not set
> +
> +#
> +# OTG and related infrastructure
> +#
> # CONFIG_UWB is not set
> CONFIG_MMC=m
> # CONFIG_MMC_DEBUG is not set
> @@ -1305,7 +1442,8 @@ CONFIG_SDIO_UART=m
> # MMC/SD/SDIO Host Controller Drivers
> #
> CONFIG_MMC_SDHCI=m
> -# CONFIG_MMC_SDHCI_PCI is not set
> +CONFIG_MMC_SDHCI_PCI=m
> +CONFIG_MMC_RICOH_MMC=m
> # CONFIG_MMC_WBSD is not set
> # CONFIG_MMC_TIFM_SD is not set
> # CONFIG_MEMSTICK is not set
> @@ -1330,6 +1468,7 @@ CONFIG_NET_DMA=y
> CONFIG_DCA=m
> # CONFIG_UIO is not set
> # CONFIG_STAGING is not set
> +# CONFIG_X86_PLATFORM_DEVICES is not set
>
> #
> # Firmware Drivers
> @@ -1355,6 +1494,7 @@ CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> # CONFIG_EXT4_FS is not set
> CONFIG_JBD=m
> +# CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=m
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> @@ -1367,6 +1507,7 @@ CONFIG_FS_POSIX_ACL=y
> CONFIG_FILE_LOCKING=y
> # CONFIG_XFS_FS is not set
> # CONFIG_OCFS2_FS is not set
> +# CONFIG_BTRFS_FS is not set
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> @@ -1409,26 +1550,7 @@ CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=m
> -
> -#
> -# Miscellaneous filesystems
> -#
> -# CONFIG_ADFS_FS is not set
> -# CONFIG_AFFS_FS is not set
> -# CONFIG_HFS_FS is not set
> -# CONFIG_HFSPLUS_FS is not set
> -# CONFIG_BEFS_FS is not set
> -# CONFIG_BFS_FS is not set
> -# CONFIG_EFS_FS is not set
> -# CONFIG_CRAMFS is not set
> -# CONFIG_VXFS_FS is not set
> -# CONFIG_MINIX_FS is not set
> -# CONFIG_OMFS_FS is not set
> -# CONFIG_HPFS_FS is not set
> -# CONFIG_QNX4FS_FS is not set
> -# CONFIG_ROMFS_FS is not set
> -# CONFIG_SYSV_FS is not set
> -# CONFIG_UFS_FS is not set
> +# CONFIG_MISC_FILESYSTEMS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> @@ -1519,7 +1641,7 @@ CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=1024
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> -# CONFIG_DEBUG_FS is not set
> +CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> @@ -1553,6 +1675,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_MEMORY_INIT=y
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_SG is not set
> +# CONFIG_DEBUG_NOTIFIERS is not set
> CONFIG_FRAME_POINTER=y
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> @@ -1561,9 +1684,15 @@ CONFIG_FRAME_POINTER=y
> # CONFIG_FAULT_INJECTION is not set
> CONFIG_LATENCYTOP=y
> CONFIG_SYSCTL_SYSCALL_CHECK=y
> +CONFIG_USER_STACKTRACE_SUPPORT=y
> +CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> +CONFIG_RING_BUFFER=y
> +CONFIG_TRACING=y
>
> #
> # Tracers
> @@ -1575,7 +1704,10 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> # CONFIG_SCHED_TRACER is not set
> # CONFIG_CONTEXT_SWITCH_TRACER is not set
> # CONFIG_BOOT_TRACER is not set
> +# CONFIG_TRACE_BRANCH_PROFILING is not set
> +# CONFIG_POWER_TRACER is not set
> # CONFIG_STACK_TRACER is not set
> +# CONFIG_FTRACE_STARTUP_TEST is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
> # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
> @@ -1606,6 +1738,7 @@ CONFIG_IO_DELAY_TYPE_NONE=3
> # CONFIG_IO_DELAY_UDELAY is not set
> CONFIG_IO_DELAY_NONE=y
> CONFIG_DEFAULT_IO_DELAY_TYPE=3
> +# CONFIG_DEBUG_BOOT_PARAMS is not set
> # CONFIG_CPA_DEBUG is not set
> CONFIG_OPTIMIZE_INLINING=y
>
> @@ -1621,7 +1754,7 @@ CONFIG_CRYPTO=y
> #
> # Crypto core or helper
> #
> -CONFIG_CRYPTO_FIPS=y
> +# CONFIG_CRYPTO_FIPS is not set
> CONFIG_CRYPTO_ALGAPI=m
> CONFIG_CRYPTO_ALGAPI2=m
> CONFIG_CRYPTO_AEAD=m
> @@ -1630,91 +1763,89 @@ CONFIG_CRYPTO_BLKCIPHER=m
> CONFIG_CRYPTO_BLKCIPHER2=m
> CONFIG_CRYPTO_HASH=m
> CONFIG_CRYPTO_HASH2=m
> -CONFIG_CRYPTO_RNG=m
> CONFIG_CRYPTO_RNG2=m
> CONFIG_CRYPTO_MANAGER=m
> CONFIG_CRYPTO_MANAGER2=m
> -CONFIG_CRYPTO_GF128MUL=m
> -CONFIG_CRYPTO_NULL=m
> -CONFIG_CRYPTO_CRYPTD=m
> +# CONFIG_CRYPTO_GF128MUL is not set
> +# CONFIG_CRYPTO_NULL is not set
> +# CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=m
> -CONFIG_CRYPTO_TEST=m
> +# CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> -CONFIG_CRYPTO_CCM=m
> -CONFIG_CRYPTO_GCM=m
> -CONFIG_CRYPTO_SEQIV=m
> +# CONFIG_CRYPTO_CCM is not set
> +# CONFIG_CRYPTO_GCM is not set
> +# CONFIG_CRYPTO_SEQIV is not set
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=m
> -CONFIG_CRYPTO_CTR=m
> -CONFIG_CRYPTO_CTS=m
> +# CONFIG_CRYPTO_CTR is not set
> +# CONFIG_CRYPTO_CTS is not set
> CONFIG_CRYPTO_ECB=m
> -CONFIG_CRYPTO_LRW=m
> -CONFIG_CRYPTO_PCBC=m
> -CONFIG_CRYPTO_XTS=m
> +# CONFIG_CRYPTO_LRW is not set
> +# CONFIG_CRYPTO_PCBC is not set
> +# CONFIG_CRYPTO_XTS is not set
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=m
> -CONFIG_CRYPTO_XCBC=m
> +# CONFIG_CRYPTO_XCBC is not set
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=m
> -CONFIG_CRYPTO_CRC32C_INTEL=m
> -CONFIG_CRYPTO_MD4=m
> +# CONFIG_CRYPTO_CRC32C_INTEL is not set
> +# CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=m
> -CONFIG_CRYPTO_MICHAEL_MIC=m
> -CONFIG_CRYPTO_RMD128=m
> -CONFIG_CRYPTO_RMD160=m
> -CONFIG_CRYPTO_RMD256=m
> -CONFIG_CRYPTO_RMD320=m
> +# CONFIG_CRYPTO_MICHAEL_MIC is not set
> +# CONFIG_CRYPTO_RMD128 is not set
> +# CONFIG_CRYPTO_RMD160 is not set
> +# CONFIG_CRYPTO_RMD256 is not set
> +# CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=m
> -CONFIG_CRYPTO_SHA256=m
> -CONFIG_CRYPTO_SHA512=m
> -CONFIG_CRYPTO_TGR192=m
> -CONFIG_CRYPTO_WP512=m
> +# CONFIG_CRYPTO_SHA256 is not set
> +# CONFIG_CRYPTO_SHA512 is not set
> +# CONFIG_CRYPTO_TGR192 is not set
> +# CONFIG_CRYPTO_WP512 is not set
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=m
> -CONFIG_CRYPTO_AES_586=m
> -CONFIG_CRYPTO_ANUBIS=m
> +# CONFIG_CRYPTO_AES_586 is not set
> +# CONFIG_CRYPTO_ANUBIS is not set
> CONFIG_CRYPTO_ARC4=m
> -CONFIG_CRYPTO_BLOWFISH=m
> -CONFIG_CRYPTO_CAMELLIA=m
> -CONFIG_CRYPTO_CAST5=m
> -CONFIG_CRYPTO_CAST6=m
> +# CONFIG_CRYPTO_BLOWFISH is not set
> +# CONFIG_CRYPTO_CAMELLIA is not set
> +# CONFIG_CRYPTO_CAST5 is not set
> +# CONFIG_CRYPTO_CAST6 is not set
> CONFIG_CRYPTO_DES=m
> -CONFIG_CRYPTO_FCRYPT=m
> -CONFIG_CRYPTO_KHAZAD=m
> -CONFIG_CRYPTO_SALSA20=m
> -CONFIG_CRYPTO_SALSA20_586=m
> -CONFIG_CRYPTO_SEED=m
> -CONFIG_CRYPTO_SERPENT=m
> -CONFIG_CRYPTO_TEA=m
> -CONFIG_CRYPTO_TWOFISH=m
> -CONFIG_CRYPTO_TWOFISH_COMMON=m
> -CONFIG_CRYPTO_TWOFISH_586=m
> +# CONFIG_CRYPTO_FCRYPT is not set
> +# CONFIG_CRYPTO_KHAZAD is not set
> +# CONFIG_CRYPTO_SALSA20 is not set
> +# CONFIG_CRYPTO_SALSA20_586 is not set
> +# CONFIG_CRYPTO_SEED is not set
> +# CONFIG_CRYPTO_SERPENT is not set
> +# CONFIG_CRYPTO_TEA is not set
> +# CONFIG_CRYPTO_TWOFISH is not set
> +# CONFIG_CRYPTO_TWOFISH_586 is not set
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=m
> -CONFIG_CRYPTO_LZO=m
> +# CONFIG_CRYPTO_LZO is not set
>
> #
> # Random Number Generation
> #
> -CONFIG_CRYPTO_ANSI_CPRNG=m
> +# CONFIG_CRYPTO_ANSI_CPRNG is not set
> # CONFIG_CRYPTO_HW is not set
> CONFIG_HAVE_KVM=y
> # CONFIG_VIRTUALIZATION is not set
> @@ -1725,17 +1856,16 @@ CONFIG_HAVE_KVM=y
> CONFIG_BITREVERSE=m
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> -CONFIG_CRC_CCITT=m
> -CONFIG_CRC16=m
> -CONFIG_CRC_T10DIF=m
> +CONFIG_GENERIC_FIND_LAST_BIT=y
> +# CONFIG_CRC_CCITT is not set
> +# CONFIG_CRC16 is not set
> +# CONFIG_CRC_T10DIF is not set
> CONFIG_CRC_ITU_T=m
> CONFIG_CRC32=m
> -CONFIG_CRC7=m
> +# CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=m
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m
> -CONFIG_LZO_COMPRESS=m
> -CONFIG_LZO_DECOMPRESS=m
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
>
> Justin Madru
>

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Justin P. Mattock wrote:
> Justin Madru wrote:
>> Ok, more preliminary testing has returned that at least in the case 
>> of the iGoogle page crashing, it's related to google talk.
>> Because right after it connects to the google talk server the crash 
>> happens.
>> And why it doesn't crash on firefox 3.2 is because for some reason 
>> the talk feature doesn't load on that version of firefox.
>> I still get the crashes when going to Preferences->Main or 
>> Preferences->Applications.
>>
>> I tried the suggested moving of .gconf* .gnome* .mozilla*
>> The only thing that did was make firefox crash when going to Preference.
>> I did not try compiling firefox from source, but I did test with the 
>> binaries straight from mozilla.
>> I also tried disabling any plugin/extention (I only have flash and 
>> AdBlockerPlus), but no change.
>>
> What I should of said, is to maybe uninstall/disable any of those apps 
> or plugins
> that are automatically triggered when loading firefox.
> (although renaming some of  the  .* files is good, freshens it up);
> So when you don't go to google talk you can surf?

So far only a connection to talkgadget.google.com or the 2 tabs in 
preferences make firefox crash.
Other than that I've yet to run into another site that makes it crash, 
and can browse just fine.
Actually, other than this bug .29-rc2 is running rather nicely ;-)

Ok, this time I maded sure I uninstalled/disabled everything I could.
Sill.... same results. So, I decided to try something different. Test 
with Epiphany.
I tried both with the geko and webkit backends.
Same results, a crash when going to my iGoogle page that has google talk 
applet.

But, this time epiphany left an error to the console that gives a clue 
to the cause:

$ epiphany-webkit                                                
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) from 
the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) from 
the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
from the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
from the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
from the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
from the grid
** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
from the grid
console message:  @1: Unsafe JavaScript attempt to access frame with URL
http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js
from frame with URL
http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true.
Domains, protocols and ports must match.
console message:  @1: Unsafe JavaScript attempt to access frame
with URL http://www.google.com/ig from frame with URL
http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card.
Domains, protocols and ports must match.
console message:  @1: Unsafe JavaScript attempt to access frame
with URL http://www.google.com/ig from frame with URL
http://talkgadget.google.com/talkgadget/blank. Domains,
protocols and ports must match.
Segmentation fault

So, it's complaining about matching domains, protocols and ports.
Henceforth, I would surmise that the bug is related to the network code?

Justin Madru

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin P. Mattock]

Justin Madru wrote:
> Justin P. Mattock wrote:
>> Justin Madru wrote:
>>> Ok, more preliminary testing has returned that at least in the case 
>>> of the iGoogle page crashing, it's related to google talk.
>>> Because right after it connects to the google talk server the crash 
>>> happens.
>>> And why it doesn't crash on firefox 3.2 is because for some reason 
>>> the talk feature doesn't load on that version of firefox.
>>> I still get the crashes when going to Preferences->Main or 
>>> Preferences->Applications.
>>>
>>> I tried the suggested moving of .gconf* .gnome* .mozilla*
>>> The only thing that did was make firefox crash when going to 
>>> Preference.
>>> I did not try compiling firefox from source, but I did test with the 
>>> binaries straight from mozilla.
>>> I also tried disabling any plugin/extention (I only have flash and 
>>> AdBlockerPlus), but no change.
>>>
>> What I should of said, is to maybe uninstall/disable any of those 
>> apps or plugins
>> that are automatically triggered when loading firefox.
>> (although renaming some of  the  .* files is good, freshens it up);
>> So when you don't go to google talk you can surf?
>
> So far only a connection to talkgadget.google.com or the 2 tabs in 
> preferences make firefox crash.
> Other than that I've yet to run into another site that makes it crash, 
> and can browse just fine.
> Actually, other than this bug .29-rc2 is running rather nicely ;-)
>
> Ok, this time I maded sure I uninstalled/disabled everything I could.
> Sill.... same results. So, I decided to try something different. Test 
> with Epiphany.
> I tried both with the geko and webkit backends.
> Same results, a crash when going to my iGoogle page that has google 
> talk applet.
>
> But, this time epiphany left an error to the console that gives a clue 
> to the cause:
>
> $ epiphany-webkit                                                ** 
> (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
> the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) 
> from the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) 
> from the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
> from the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
> from the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
> from the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
> from the grid
> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
> from the grid
> console message:  @1: Unsafe JavaScript attempt to access frame with URL
> http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js 
>
> from frame with URL
> http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true. 
>
> Domains, protocols and ports must match.
> console message:  @1: Unsafe JavaScript attempt to access frame
> with URL http://www.google.com/ig from frame with URL
> http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card. 
>
> Domains, protocols and ports must match.
> console message:  @1: Unsafe JavaScript attempt to access frame
> with URL http://www.google.com/ig from frame with URL
> http://talkgadget.google.com/talkgadget/blank. Domains,
> protocols and ports must match.
> Segmentation fault
>
> So, it's complaining about matching domains, protocols and ports.
> Henceforth, I would surmise that the bug is related to the network code?
>
> Justin Madru
>
Well positive side is you can at least  grab youre news and info.
bad side is you can't access igoogle(or whatever it's called).

Domains, protocols and ports must match.
probably the culprit(if you found the correct location
that's causing this);

regards;

Justin P. Mattock

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Justin P. Mattock wrote:
> Justin Madru wrote:
>> Justin P. Mattock wrote:
>>> Justin Madru wrote:
>>>> Ok, more preliminary testing has returned that at least in the case 
>>>> of the iGoogle page crashing, it's related to google talk.
>>>> Because right after it connects to the google talk server the crash 
>>>> happens.
>>>> And why it doesn't crash on firefox 3.2 is because for some reason 
>>>> the talk feature doesn't load on that version of firefox.
>>>> I still get the crashes when going to Preferences->Main or 
>>>> Preferences->Applications.
>>>>
>>>> I tried the suggested moving of .gconf* .gnome* .mozilla*
>>>> The only thing that did was make firefox crash when going to 
>>>> Preference.
>>>> I did not try compiling firefox from source, but I did test with 
>>>> the binaries straight from mozilla.
>>>> I also tried disabling any plugin/extention (I only have flash and 
>>>> AdBlockerPlus), but no change.
>>>>
>>> What I should of said, is to maybe uninstall/disable any of those 
>>> apps or plugins
>>> that are automatically triggered when loading firefox.
>>> (although renaming some of  the  .* files is good, freshens it up);
>>> So when you don't go to google talk you can surf?
>>
>> So far only a connection to talkgadget.google.com or the 2 tabs in 
>> preferences make firefox crash.
>> Other than that I've yet to run into another site that makes it 
>> crash, and can browse just fine.
>> Actually, other than this bug .29-rc2 is running rather nicely ;-)
>>
>> Ok, this time I maded sure I uninstalled/disabled everything I could.
>> Sill.... same results. So, I decided to try something different. Test 
>> with Epiphany.
>> I tried both with the geko and webkit backends.
>> Same results, a crash when going to my iGoogle page that has google 
>> talk applet.
>>
>> But, this time epiphany left an error to the console that gives a 
>> clue to the cause:
>>
>> $ epiphany-webkit                                                ** 
>> (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
>> the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
>> from the grid
>> console message:  @1: Unsafe JavaScript attempt to access frame with URL
>> http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js 
>>
>> from frame with URL
>> http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true. 
>>
>> Domains, protocols and ports must match.
>> console message:  @1: Unsafe JavaScript attempt to access frame
>> with URL http://www.google.com/ig from frame with URL
>> http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card. 
>>
>> Domains, protocols and ports must match.
>> console message:  @1: Unsafe JavaScript attempt to access frame
>> with URL http://www.google.com/ig from frame with URL
>> http://talkgadget.google.com/talkgadget/blank. Domains,
>> protocols and ports must match.
>> Segmentation fault
>>
>> So, it's complaining about matching domains, protocols and ports.
>> Henceforth, I would surmise that the bug is related to the network code?
>>
>> Justin Madru
>>
> Well positive side is you can at least  grab youre news and info.
> bad side is you can't access igoogle(or whatever it's called).
>
> Domains, protocols and ports must match.
> probably the culprit(if you found the correct location
> that's causing this);
>
> regards;
>
> Justin P. Mattock
>
It's only half positive because I use the google rss reader of igoogle.
Unfortunately, there's the stupid google talk app that won't go away, 
that causes the crash!
But I can fortunately use firefox 3.2 because google talk says it 
doesn't support that browser and doesn't load.

I'll do a git bisect if I can, and report back in a few days.

Justin Madru

Re: 2.6.29-rc1 Firefox crashing on page load

[Justin P. Mattock]

Justin Madru wrote:
> Justin P. Mattock wrote:
>> Justin Madru wrote:
>>> Justin P. Mattock wrote:
>>>> Justin Madru wrote:
>>>>> Ok, more preliminary testing has returned that at least in the 
>>>>> case of the iGoogle page crashing, it's related to google talk.
>>>>> Because right after it connects to the google talk server the 
>>>>> crash happens.
>>>>> And why it doesn't crash on firefox 3.2 is because for some reason 
>>>>> the talk feature doesn't load on that version of firefox.
>>>>> I still get the crashes when going to Preferences->Main or 
>>>>> Preferences->Applications.
>>>>>
>>>>> I tried the suggested moving of .gconf* .gnome* .mozilla*
>>>>> The only thing that did was make firefox crash when going to 
>>>>> Preference.
>>>>> I did not try compiling firefox from source, but I did test with 
>>>>> the binaries straight from mozilla.
>>>>> I also tried disabling any plugin/extention (I only have flash and 
>>>>> AdBlockerPlus), but no change.
>>>>>
>>>> What I should of said, is to maybe uninstall/disable any of those 
>>>> apps or plugins
>>>> that are automatically triggered when loading firefox.
>>>> (although renaming some of  the  .* files is good, freshens it up);
>>>> So when you don't go to google talk you can surf?
>>>
>>> So far only a connection to talkgadget.google.com or the 2 tabs in 
>>> preferences make firefox crash.
>>> Other than that I've yet to run into another site that makes it 
>>> crash, and can browse just fine.
>>> Actually, other than this bug .29-rc2 is running rather nicely ;-)
>>>
>>> Ok, this time I maded sure I uninstalled/disabled everything I could.
>>> Sill.... same results. So, I decided to try something different. 
>>> Test with Epiphany.
>>> I tried both with the geko and webkit backends.
>>> Same results, a crash when going to my iGoogle page that has google 
>>> talk applet.
>>>
>>> But, this time epiphany left an error to the console that gives a 
>>> clue to the cause:
>>>
>>> $ epiphany-webkit                                                ** 
>>> (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
>>> the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
>>> from the grid
>>> console message:  @1: Unsafe JavaScript attempt to access frame with 
>>> URL
>>> http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js 
>>>
>>> from frame with URL
>>> http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true. 
>>>
>>> Domains, protocols and ports must match.
>>> console message:  @1: Unsafe JavaScript attempt to access frame
>>> with URL http://www.google.com/ig from frame with URL
>>> http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card. 
>>>
>>> Domains, protocols and ports must match.
>>> console message:  @1: Unsafe JavaScript attempt to access frame
>>> with URL http://www.google.com/ig from frame with URL
>>> http://talkgadget.google.com/talkgadget/blank. Domains,
>>> protocols and ports must match.
>>> Segmentation fault
>>>
>>> So, it's complaining about matching domains, protocols and ports.
>>> Henceforth, I would surmise that the bug is related to the network 
>>> code?
>>>
>>> Justin Madru
>>>
>> Well positive side is you can at least  grab youre news and info.
>> bad side is you can't access igoogle(or whatever it's called).
>>
>> Domains, protocols and ports must match.
>> probably the culprit(if you found the correct location
>> that's causing this);
>>
>> regards;
>>
>> Justin P. Mattock
>>
> It's only half positive because I use the google rss reader of igoogle.
> Unfortunately, there's the stupid google talk app that won't go away, 
> that causes the crash!
> But I can fortunately use firefox 3.2 because google talk says it 
> doesn't support that browser and doesn't load.
>
> I'll do a git bisect if I can, and report back in a few days.
>
> Justin Madru
>
I suppose you can go in and manually
delete google talk. but then you never know what
will happen after that.

regards;

Justin P. Mattock

[bisected] 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Justin P. Mattock wrote:
> Justin Madru wrote:
>>
>> So far only a connection to talkgadget.google.com or the 2 tabs in 
>> preferences make firefox crash.
>> Other than that I've yet to run into another site that makes it 
>> crash, and can browse just fine.
>> Actually, other than this bug .29-rc2 is running rather nicely ;-)
>>
>> Ok, this time I maded sure I uninstalled/disabled everything I could.
>> Sill.... same results. So, I decided to try something different. Test 
>> with Epiphany.
>> I tried both with the geko and webkit backends.
>> Same results, a crash when going to my iGoogle page that has google 
>> talk applet.
>>
>> But, this time epiphany left an error to the console that gives a 
>> clue to the cause:
>>
>> $ epiphany-webkit                                                ** 
>> (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
>> the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
>> from the grid
>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
>> from the grid
>> console message:  @1: Unsafe JavaScript attempt to access frame with URL
>> http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js 
>>
>> from frame with URL
>> http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true. 
>>
>> Domains, protocols and ports must match.
>> console message:  @1: Unsafe JavaScript attempt to access frame
>> with URL http://www.google.com/ig from frame with URL
>> http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card. 
>>
>> Domains, protocols and ports must match.
>> console message:  @1: Unsafe JavaScript attempt to access frame
>> with URL http://www.google.com/ig from frame with URL
>> http://talkgadget.google.com/talkgadget/blank. Domains,
>> protocols and ports must match.
>> Segmentation fault
>>
>> So, it's complaining about matching domains, protocols and ports.
>> Henceforth, I would surmise that the bug is related to the network code?
>>
>> Justin Madru
>>
> Well positive side is you can at least  grab youre news and info.
> bad side is you can't access igoogle(or whatever it's called).
>
> Domains, protocols and ports must match.
> probably the culprit(if you found the correct location
> that's causing this);
>
> regards;
>
> Justin P. Mattock
>
Ok, finally bisected the bug, but the commit isn't related to networking!
I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
on current git and that fixed the bug.

By the way, how do I undo my git revert, so I'm back to a pristine tree?
I want to drop my changes - the revert.
Also how do I find the commit that merged/pulled in this commit?

commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date:   Fri Dec 5 17:17:09 2008 -0800

    x86: signal: change type of paramter for sys_rt_sigreturn()

    Impact: cleanup on 32-bit

    Peter pointed this parameter can be changed.

    Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>

:040000 040000 f5fba48247ff200092c38a54e334f495917229d5 
b901159897e5d85e0dc2a0c9d904d9a73c1d58a2 M      arch

    arch/x86/include/asm/syscalls.h
    arch/x86/kernel/signal.c

diff --git a/arch/x86/include/asm/syscalls.h 
b/arch/x86/include/asm/syscalls.h
index 87803da..3a5252c 100644 (file)
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -33,7 +33,7 @@ asmlinkage int sys_sigaction(int, const struct 
old_sigaction __user *,
                             struct old_sigaction __user *);
 asmlinkage int sys_sigaltstack(unsigned long);
 asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(unsigned long);
+asmlinkage int sys_rt_sigreturn(struct pt_regs);
 
 /* kernel/ioport.c */
 asmlinkage long sys_iopl(unsigned long);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index b1f4d34..b1cc6da 100644 (file)
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -642,11 +642,9 @@ badframe:
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
 {
-       struct pt_regs *regs = (struct pt_regs *)&__unused;
-
-       return do_rt_sigreturn(regs);
+       return do_rt_sigreturn(&regs);
 }
 #else /* !CONFIG_X86_32 */
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)

Justin Madru

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Justin P. Mattock]

Justin Madru wrote:
> Justin P. Mattock wrote:
>> Justin Madru wrote:
>>>
>>> So far only a connection to talkgadget.google.com or the 2 tabs in 
>>> preferences make firefox crash.
>>> Other than that I've yet to run into another site that makes it 
>>> crash, and can browse just fine.
>>> Actually, other than this bug .29-rc2 is running rather nicely ;-)
>>>
>>> Ok, this time I maded sure I uninstalled/disabled everything I could.
>>> Sill.... same results. So, I decided to try something different. 
>>> Test with Epiphany.
>>> I tried both with the geko and webkit backends.
>>> Same results, a crash when going to my iGoogle page that has google 
>>> talk applet.
>>>
>>> But, this time epiphany left an error to the console that gives a 
>>> clue to the cause:
>>>
>>> $ epiphany-webkit                                                ** 
>>> (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
>>> the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
>>> from the grid
>>> console message:  @1: Unsafe JavaScript attempt to access frame with 
>>> URL
>>> http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js 
>>>
>>> from frame with URL
>>> http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true. 
>>>
>>> Domains, protocols and ports must match.
>>> console message:  @1: Unsafe JavaScript attempt to access frame
>>> with URL http://www.google.com/ig from frame with URL
>>> http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card. 
>>>
>>> Domains, protocols and ports must match.
>>> console message:  @1: Unsafe JavaScript attempt to access frame
>>> with URL http://www.google.com/ig from frame with URL
>>> http://talkgadget.google.com/talkgadget/blank. Domains,
>>> protocols and ports must match.
>>> Segmentation fault
>>>
>>> So, it's complaining about matching domains, protocols and ports.
>>> Henceforth, I would surmise that the bug is related to the network 
>>> code?
>>>
>>> Justin Madru
>>>
>> Well positive side is you can at least  grab youre news and info.
>> bad side is you can't access igoogle(or whatever it's called).
>>
>> Domains, protocols and ports must match.
>> probably the culprit(if you found the correct location
>> that's causing this);
>>
>> regards;
>>
>> Justin P. Mattock
>>
> Ok, finally bisected the bug, but the commit isn't related to networking!
> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> on current git and that fixed the bug.
>
> By the way, how do I undo my git revert, so I'm back to a pristine tree?
> I want to drop my changes - the revert.
> Also how do I find the commit that merged/pulled in this commit?
>
> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
> Date:   Fri Dec 5 17:17:09 2008 -0800
>
>    x86: signal: change type of paramter for sys_rt_sigreturn()
>
>    Impact: cleanup on 32-bit
>
>    Peter pointed this parameter can be changed.
>
>    Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>    Signed-off-by: Ingo Molnar <mingo@elte.hu>
>
> :040000 040000 f5fba48247ff200092c38a54e334f495917229d5 
> b901159897e5d85e0dc2a0c9d904d9a73c1d58a2 M      arch
>
>    arch/x86/include/asm/syscalls.h
>    arch/x86/kernel/signal.c
>
> diff --git a/arch/x86/include/asm/syscalls.h 
> b/arch/x86/include/asm/syscalls.h
> index 87803da..3a5252c 100644 (file)
> --- a/arch/x86/include/asm/syscalls.h
> +++ b/arch/x86/include/asm/syscalls.h
> @@ -33,7 +33,7 @@ asmlinkage int sys_sigaction(int, const struct 
> old_sigaction __user *,
>                             struct old_sigaction __user *);
> asmlinkage int sys_sigaltstack(unsigned long);
> asmlinkage unsigned long sys_sigreturn(unsigned long);
> -asmlinkage int sys_rt_sigreturn(unsigned long);
> +asmlinkage int sys_rt_sigreturn(struct pt_regs);
>
> /* kernel/ioport.c */
> asmlinkage long sys_iopl(unsigned long);
> diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
> index b1f4d34..b1cc6da 100644 (file)
> --- a/arch/x86/kernel/signal.c
> +++ b/arch/x86/kernel/signal.c
> @@ -642,11 +642,9 @@ badframe:
> }
>
> #ifdef CONFIG_X86_32
> -asmlinkage int sys_rt_sigreturn(unsigned long __unused)
> +asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
> {
> -       struct pt_regs *regs = (struct pt_regs *)&__unused;
> -
> -       return do_rt_sigreturn(regs);
> +       return do_rt_sigreturn(&regs);
> }
> #else /* !CONFIG_X86_32 */
> asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
>
> Justin Madru
>
I normally do a:
git-reset --hard origin
git-pull
(thanks to alexey starikovskiy for that one);

glad to see you have it working.

regards;

Justin P. Mattock

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Hiroshi Shimamoto]

Justin Madru wrote:
> Justin P. Mattock wrote:
>> Justin Madru wrote:
>>> So far only a connection to talkgadget.google.com or the 2 tabs in 
>>> preferences make firefox crash.
>>> Other than that I've yet to run into another site that makes it 
>>> crash, and can browse just fine.
>>> Actually, other than this bug .29-rc2 is running rather nicely ;-)
>>>
>>> Ok, this time I maded sure I uninstalled/disabled everything I could.
>>> Sill.... same results. So, I decided to try something different. Test 
>>> with Epiphany.
>>> I tried both with the geko and webkit backends.
>>> Same results, a crash when going to my iGoogle page that has google 
>>> talk applet.
>>>
>>> But, this time epiphany left an error to the console that gives a 
>>> clue to the cause:
>>>
>>> $ epiphany-webkit                                                ** 
>>> (epiphany-webkit:9016): WARNING **: Cannot extract frame (0,0) from 
>>> the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (36,0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (72,0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (108, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (144, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (180, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (216, 0) 
>>> from the grid
>>> ** (epiphany-webkit:9016): WARNING **: Cannot extract frame (252, 0) 
>>> from the grid
>>> console message:  @1: Unsafe JavaScript attempt to access frame with URL
>>> http://1.gmodules.com/ig/ifr?view=home&url=http://www.google.com/ig/modules/youtube_igoogle/v2/youtube.xml&nocache=0&up_title=YouTube&up_username=&up_prefs_version=0&up_search_channels=0&up_search_channel_name0=&up_search_channel_url0=&up_search_channel_name1=&up_search_channel_url1=&up_search_channel_name2=&up_search_channel_url2=&up_current_channel_id=0&up_rawQuery=&up_channel_url_to_preload=http://gdata.youtube.com/feeds/api/standardfeeds/US/recently_featured%3Falt%3Djson&lang=en&country=us&.lang=en&.country=us&synd=ig&mid=1&ifpctok=-8098139156870189641&parent=http://www.google.com&extern_js=/extern_js/f/CgJlbhICdXMrMBU4ACw/BrDZK7EjJT4.js 
>>>
>>> from frame with URL
>>> http://www.google.com/ig/ifpc_relay#%22remote_iframe_1%22&0&1&0&%22%2522remote_iframe_1%2522%26%2522resize_iframe%2522%26%2522%2522%26%2522%2522%26%2522remote_iframe_1%2522%26369%26%25221%2522%22&true. 
>>>
>>> Domains, protocols and ports must match.
>>> console message:  @1: Unsafe JavaScript attempt to access frame
>>> with URL http://www.google.com/ig from frame with URL
>>> http://talkgadget.google.com/talkgadget/mole?id=gth-hover-card&hl=en#id=gth-hover-card. 
>>>
>>> Domains, protocols and ports must match.
>>> console message:  @1: Unsafe JavaScript attempt to access frame
>>> with URL http://www.google.com/ig from frame with URL
>>> http://talkgadget.google.com/talkgadget/blank. Domains,
>>> protocols and ports must match.
>>> Segmentation fault
>>>
>>> So, it's complaining about matching domains, protocols and ports.
>>> Henceforth, I would surmise that the bug is related to the network code?
>>>
>>> Justin Madru
>>>
>> Well positive side is you can at least  grab youre news and info.
>> bad side is you can't access igoogle(or whatever it's called).
>>
>> Domains, protocols and ports must match.
>> probably the culprit(if you found the correct location
>> that's causing this);
>>
>> regards;
>>
>> Justin P. Mattock
>>
> Ok, finally bisected the bug, but the commit isn't related to networking!
> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> on current git and that fixed the bug.
> 
> By the way, how do I undo my git revert, so I'm back to a pristine tree?
> I want to drop my changes - the revert.
> Also how do I find the commit that merged/pulled in this commit?
> 
> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
> Date:   Fri Dec 5 17:17:09 2008 -0800
> 
>     x86: signal: change type of paramter for sys_rt_sigreturn()
> 
>     Impact: cleanup on 32-bit
> 
>     Peter pointed this parameter can be changed.
> 
>     Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>     Signed-off-by: Ingo Molnar <mingo@elte.hu>

Hi,
thanks for reporting.

I'm not sure why this commit affects.
Can you check vmlinux? size, objdump, etc.
On my environment, the generated code looks same.

Thanks,
Hiroshi

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Hiroshi Shimamoto wrote:
> Justin Madru wrote:
>> Ok, finally bisected the bug, but the commit isn't related to networking!
>> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>> on current git and that fixed the bug.
>>
>> By the way, how do I undo my git revert, so I'm back to a pristine tree?
>> I want to drop my changes - the revert.
>> Also how do I find the commit that merged/pulled in this commit?
>>
>> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>> Date: Fri Dec 5 17:17:09 2008 -0800
>>
>> x86: signal: change type of paramter for sys_rt_sigreturn()
>>
>> Impact: cleanup on 32-bit
>>
>> Peter pointed this parameter can be changed.
>>
>> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>
> Hi,
> thanks for reporting.
>
> I'm not sure why this commit affects.
> Can you check vmlinux? size, objdump, etc.
> On my environment, the generated code looks same.
>
> Thanks,
> Hiroshi
>
I tried to do an objdump but it gave an error. How am I suppose to do an 
objdump?

$ objdump -x /boot/vmlinuz-2.6.29-rc2-git
objdump: /boot/vmlinuz-2.6.29-rc2-git: File format not recognized
$ readelf -a /boot/vmlinuz-2.6.29-rc2-git
readelf: Error: Unable to seek to 0xc031f2eb for section headers
readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
$ ls -la /boot/vmlinuz-2.6.29-rc2-git
-rw-r--r-- 1 root root 2286480 2009-01-19 18:44 /boot/vmlinuz-2.6.29-rc2-git

Anyways, I've uploaded the extracted data.tar.gz file from the kernel 
deb file created when I
build a kernel (I use ubuntu and make-kpkg). The archive includes the 
kernel, config, system.map
and modules that I used. The files can be found at 
http://jdserver.homelinux.org/bugreports/002/
There are 2 files: data-norevert.tar.bz2 is a build without the revert, 
data-revert.tar.bz2 has the revert.

I think peter annema might have have a reason why it's crashing firefox.
If sizeof(struct pt_regs) != sizeof(unsigned long) the the stack could 
become
unbalanced if other code is not expecting a struct pt_regs.

Peter Annema wrote:
> > #ifdef CONFIG_X86_32
> > -asmlinkage int sys_rt_sigreturn(unsigned long __unused)
> > +asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
> > {
> > - struct pt_regs *regs = (struct pt_regs *)&__unused;
> > -
> > - return do_rt_sigreturn(regs);
> > + return do_rt_sigreturn(&regs);
> > }
>
> Is sizeof(struct pt_regs) different from sizeof(unsigned long)? If so, 
> is some
> code somewhere messing with the stack and not expecting a struct 
> pt_regs to have
> been put on it?

Justin Madru

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Hiroshi Shimamoto]

Justin Madru wrote:
> Hiroshi Shimamoto wrote:
>> Justin Madru wrote:
>>> Ok, finally bisected the bug, but the commit isn't related to networking!
>>> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>> on current git and that fixed the bug.
>>>
>>> By the way, how do I undo my git revert, so I'm back to a pristine tree?
>>> I want to drop my changes - the revert.
>>> Also how do I find the commit that merged/pulled in this commit?
>>>
>>> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>> Date: Fri Dec 5 17:17:09 2008 -0800
>>>
>>> x86: signal: change type of paramter for sys_rt_sigreturn()
>>>
>>> Impact: cleanup on 32-bit
>>>
>>> Peter pointed this parameter can be changed.
>>>
>>> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>> Hi,
>> thanks for reporting.
>>
>> I'm not sure why this commit affects.
>> Can you check vmlinux? size, objdump, etc.
>> On my environment, the generated code looks same.
>>
>> Thanks,
>> Hiroshi
>>
> I tried to do an objdump but it gave an error. How am I suppose to do an 
> objdump?
> 
> $ objdump -x /boot/vmlinuz-2.6.29-rc2-git
> objdump: /boot/vmlinuz-2.6.29-rc2-git: File format not recognized
> $ readelf -a /boot/vmlinuz-2.6.29-rc2-git
> readelf: Error: Unable to seek to 0xc031f2eb for section headers
> readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
> $ ls -la /boot/vmlinuz-2.6.29-rc2-git
> -rw-r--r-- 1 root root 2286480 2009-01-19 18:44 /boot/vmlinuz-2.6.29-rc2-git

not vmlinuz, vmlinux.
vmlinuz is a compressed kernel, it is not ELF file.
Usually vmlinux is generated in top of source directory.
I can see disassembled image with objdump -d vmlinux.

Thanks,
Hiroshi

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Hiroshi Shimamoto wrote:
> Justin Madru wrote:
>   
>> Hiroshi Shimamoto wrote:
>>     
>>> Justin Madru wrote:
>>>       
>>>> Ok, finally bisected the bug, but the commit isn't related to networking!
>>>> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>> on current git and that fixed the bug.
>>>>
>>>> By the way, how do I undo my git revert, so I'm back to a pristine tree?
>>>> I want to drop my changes - the revert.
>>>> Also how do I find the commit that merged/pulled in this commit?
>>>>
>>>> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>> Date: Fri Dec 5 17:17:09 2008 -0800
>>>>
>>>> x86: signal: change type of paramter for sys_rt_sigreturn()
>>>>
>>>> Impact: cleanup on 32-bit
>>>>
>>>> Peter pointed this parameter can be changed.
>>>>
>>>> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>         
>>> Hi,
>>> thanks for reporting.
>>>
>>> I'm not sure why this commit affects.
>>> Can you check vmlinux? size, objdump, etc.
>>> On my environment, the generated code looks same.
>>>
>>> Thanks,
>>> Hiroshi
>>>
>>>       
>> I tried to do an objdump but it gave an error. How am I suppose to do an 
>> objdump?
>>
>> $ objdump -x /boot/vmlinuz-2.6.29-rc2-git
>> objdump: /boot/vmlinuz-2.6.29-rc2-git: File format not recognized
>> $ readelf -a /boot/vmlinuz-2.6.29-rc2-git
>> readelf: Error: Unable to seek to 0xc031f2eb for section headers
>> readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
>> $ ls -la /boot/vmlinuz-2.6.29-rc2-git
>> -rw-r--r-- 1 root root 2286480 2009-01-19 18:44 /boot/vmlinuz-2.6.29-rc2-git
>>     
>
> not vmlinuz, vmlinux.
> vmlinuz is a compressed kernel, it is not ELF file.
> Usually vmlinux is generated in top of source directory.
> I can see disassembled image with objdump -d vmlinux.
>
> Thanks,
> Hiroshi
>
>   
Sorry, didn't know. I tried objdump -d vmlinux, but the resulting file 
is ~50MB!
Is there a smaller section you're interested in, because that would be 
hard to send.
Or am I doing it wrong again?

Justin Madru

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Hiroshi Shimamoto]

Justin Madru wrote:
> Hiroshi Shimamoto wrote:
>> Justin Madru wrote:
>>   
>>> Hiroshi Shimamoto wrote:
>>>     
>>>> Justin Madru wrote:
>>>>       
>>>>> Ok, finally bisected the bug, but the commit isn't related to networking!
>>>>> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>>> on current git and that fixed the bug.
>>>>>
>>>>> By the way, how do I undo my git revert, so I'm back to a pristine tree?
>>>>> I want to drop my changes - the revert.
>>>>> Also how do I find the commit that merged/pulled in this commit?
>>>>>
>>>>> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>>> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>>> Date: Fri Dec 5 17:17:09 2008 -0800
>>>>>
>>>>> x86: signal: change type of paramter for sys_rt_sigreturn()
>>>>>
>>>>> Impact: cleanup on 32-bit
>>>>>
>>>>> Peter pointed this parameter can be changed.
>>>>>
>>>>> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>>         
>>>> Hi,
>>>> thanks for reporting.
>>>>
>>>> I'm not sure why this commit affects.
>>>> Can you check vmlinux? size, objdump, etc.
>>>> On my environment, the generated code looks same.
>>>>
>>>> Thanks,
>>>> Hiroshi
>>>>
>>>>       
>>> I tried to do an objdump but it gave an error. How am I suppose to do an 
>>> objdump?
>>>
>>> $ objdump -x /boot/vmlinuz-2.6.29-rc2-git
>>> objdump: /boot/vmlinuz-2.6.29-rc2-git: File format not recognized
>>> $ readelf -a /boot/vmlinuz-2.6.29-rc2-git
>>> readelf: Error: Unable to seek to 0xc031f2eb for section headers
>>> readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
>>> $ ls -la /boot/vmlinuz-2.6.29-rc2-git
>>> -rw-r--r-- 1 root root 2286480 2009-01-19 18:44 /boot/vmlinuz-2.6.29-rc2-git
>>>     
>> not vmlinuz, vmlinux.
>> vmlinuz is a compressed kernel, it is not ELF file.
>> Usually vmlinux is generated in top of source directory.
>> I can see disassembled image with objdump -d vmlinux.
>>
>> Thanks,
>> Hiroshi
>>
>>   
> Sorry, didn't know. I tried objdump -d vmlinux, but the resulting file 
> is ~50MB!
> Is there a smaller section you're interested in, because that would be 
> hard to send.
> Or am I doing it wrong again?

that's OK. No need to send the disassembled result.
You can diff disassembled file.
I guess your GCC generates different code when the patch is reverted.

Thanks,
Hiroshi

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Justin Madru]

Hiroshi Shimamoto wrote:
> Justin Madru wrote:
>   
>> Hiroshi Shimamoto wrote:
>>     
>>> Justin Madru wrote:
>>>   
>>>       
>>>> Hiroshi Shimamoto wrote:
>>>>     
>>>>         
>>>>> Justin Madru wrote:
>>>>>       
>>>>>           
>>>>>> Ok, finally bisected the bug, but the commit isn't related to networking!
>>>>>> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>>>> on current git and that fixed the bug.
>>>>>>
>>>>>> By the way, how do I undo my git revert, so I'm back to a pristine tree?
>>>>>> I want to drop my changes - the revert.
>>>>>> Also how do I find the commit that merged/pulled in this commit?
>>>>>>
>>>>>> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>>>> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>>>> Date: Fri Dec 5 17:17:09 2008 -0800
>>>>>>
>>>>>> x86: signal: change type of paramter for sys_rt_sigreturn()
>>>>>>
>>>>>> Impact: cleanup on 32-bit
>>>>>>
>>>>>> Peter pointed this parameter can be changed.
>>>>>>
>>>>>> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>>>         
>>>>>>             
>>>>> Hi,
>>>>> thanks for reporting.
>>>>>
>>>>> I'm not sure why this commit affects.
>>>>> Can you check vmlinux? size, objdump, etc.
>>>>> On my environment, the generated code looks same.
>>>>>
>>>>> Thanks,
>>>>> Hiroshi
>>>>>
>>>>>       
>>>>>           
>>>> I tried to do an objdump but it gave an error. How am I suppose to do an 
>>>> objdump?
>>>>
>>>> $ objdump -x /boot/vmlinuz-2.6.29-rc2-git
>>>> objdump: /boot/vmlinuz-2.6.29-rc2-git: File format not recognized
>>>> $ readelf -a /boot/vmlinuz-2.6.29-rc2-git
>>>> readelf: Error: Unable to seek to 0xc031f2eb for section headers
>>>> readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
>>>> $ ls -la /boot/vmlinuz-2.6.29-rc2-git
>>>> -rw-r--r-- 1 root root 2286480 2009-01-19 18:44 /boot/vmlinuz-2.6.29-rc2-git
>>>>     
>>>>         
>>> not vmlinuz, vmlinux.
>>> vmlinuz is a compressed kernel, it is not ELF file.
>>> Usually vmlinux is generated in top of source directory.
>>> I can see disassembled image with objdump -d vmlinux.
>>>
>>> Thanks,
>>> Hiroshi
>>>
>>>   
>>>       
>> Sorry, didn't know. I tried objdump -d vmlinux, but the resulting file 
>> is ~50MB!
>> Is there a smaller section you're interested in, because that would be 
>> hard to send.
>> Or am I doing it wrong again?
>>     
>
> that's OK. No need to send the disassembled result.
> You can diff disassembled file.
> I guess your GCC generates different code when the patch is reverted.
>
> Thanks,
> Hiroshi
>
>   
Ok, I tried, I really did. But no mater what I did the diff was even bigger
if not the same size as the original dump! I even tried to cut out the 
first two fields with
    cut -f3- dump-revert > dump-revert2
but that wouldn't shrink the diff size (100,000+ lines).

Does gcc output fluctuate this wildly with such little change?
Is there a config option that allows gcc to randomize the output?
I recompiled just to make sure, and even two recompiles of the same 
source (no revert)
resulted in a different sha1 hash (didn't test the objdump diff).
The only thing I can think of is that I compile with -O3 instead of -O2.

I'm sorry, but unless you have any suggestions I've decided to just upload
the vmlinux files to my server (<40KB up speed) 
http://jdserver.homelinux.org/bugreports/002/
and rapidshare
http://rapidshare.com/files/186890846/vmlinux.tar.bz2.html
http://rapidshare.com/files/186890848/data-norevert.tar.bz2.html
http://rapidshare.com/files/186890849/data-revert.tar.bz2.html

By the way Ingo has already added the revert to tip/master
http://git.kernel.org/?p=linux/kernel/git/tip/linux-2.6-tip.git;a=commit;h=1d03950243904c89b8854c10516932b029c2a8fa

Justin Madru

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Hiroshi Shimamoto]

Justin Madru wrote:
> Hiroshi Shimamoto wrote:
>> Justin Madru wrote:
>>   
>>> Hiroshi Shimamoto wrote:
>>>     
>>>> Justin Madru wrote:
>>>>   
>>>>       
>>>>> Hiroshi Shimamoto wrote:
>>>>>     
>>>>>         
>>>>>> Justin Madru wrote:
>>>>>>       
>>>>>>           
>>>>>>> Ok, finally bisected the bug, but the commit isn't related to networking!
>>>>>>> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>>>>> on current git and that fixed the bug.
>>>>>>>
>>>>>>> By the way, how do I undo my git revert, so I'm back to a pristine tree?
>>>>>>> I want to drop my changes - the revert.
>>>>>>> Also how do I find the commit that merged/pulled in this commit?
>>>>>>>
>>>>>>> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
>>>>>>> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>>>>> Date: Fri Dec 5 17:17:09 2008 -0800
>>>>>>>
>>>>>>> x86: signal: change type of paramter for sys_rt_sigreturn()
>>>>>>>
>>>>>>> Impact: cleanup on 32-bit
>>>>>>>
>>>>>>> Peter pointed this parameter can be changed.
>>>>>>>
>>>>>>> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>>>>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>>>>         
>>>>>>>             
>>>>>> Hi,
>>>>>> thanks for reporting.
>>>>>>
>>>>>> I'm not sure why this commit affects.
>>>>>> Can you check vmlinux? size, objdump, etc.
>>>>>> On my environment, the generated code looks same.
>>>>>>
>>>>>> Thanks,
>>>>>> Hiroshi
>>>>>>
>>>>>>       
>>>>>>           
>>>>> I tried to do an objdump but it gave an error. How am I suppose to do an 
>>>>> objdump?
>>>>>
>>>>> $ objdump -x /boot/vmlinuz-2.6.29-rc2-git
>>>>> objdump: /boot/vmlinuz-2.6.29-rc2-git: File format not recognized
>>>>> $ readelf -a /boot/vmlinuz-2.6.29-rc2-git
>>>>> readelf: Error: Unable to seek to 0xc031f2eb for section headers
>>>>> readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
>>>>> $ ls -la /boot/vmlinuz-2.6.29-rc2-git
>>>>> -rw-r--r-- 1 root root 2286480 2009-01-19 18:44 /boot/vmlinuz-2.6.29-rc2-git
>>>>>     
>>>>>         
>>>> not vmlinuz, vmlinux.
>>>> vmlinuz is a compressed kernel, it is not ELF file.
>>>> Usually vmlinux is generated in top of source directory.
>>>> I can see disassembled image with objdump -d vmlinux.
>>>>
>>>> Thanks,
>>>> Hiroshi
>>>>
>>>>   
>>>>       
>>> Sorry, didn't know. I tried objdump -d vmlinux, but the resulting file 
>>> is ~50MB!
>>> Is there a smaller section you're interested in, because that would be 
>>> hard to send.
>>> Or am I doing it wrong again?
>>>     
>> that's OK. No need to send the disassembled result.
>> You can diff disassembled file.
>> I guess your GCC generates different code when the patch is reverted.
>>
>> Thanks,
>> Hiroshi
>>
>>   
> Ok, I tried, I really did. But no mater what I did the diff was even bigger
> if not the same size as the original dump! I even tried to cut out the 
> first two fields with
>     cut -f3- dump-revert > dump-revert2
> but that wouldn't shrink the diff size (100,000+ lines).

I'm sorry for lack of explanations.
The patch changes sys_rt_sigreturn(), it means GCC might generate
different code for that function. And might be different size, it causes
all codes after sys_rt_sigreturn() will looks different.

So I think you can see the difference begins from sys_rt_sigreturn().

> 
> Does gcc output fluctuate this wildly with such little change?
> Is there a config option that allows gcc to randomize the output?
> I recompiled just to make sure, and even two recompiles of the same 
> source (no revert)
> resulted in a different sha1 hash (didn't test the objdump diff).
> The only thing I can think of is that I compile with -O3 instead of -O2.
> 
> I'm sorry, but unless you have any suggestions I've decided to just upload
> the vmlinux files to my server (<40KB up speed) 
> http://jdserver.homelinux.org/bugreports/002/
> and rapidshare
> http://rapidshare.com/files/186890846/vmlinux.tar.bz2.html
> http://rapidshare.com/files/186890848/data-norevert.tar.bz2.html
> http://rapidshare.com/files/186890849/data-revert.tar.bz2.html

thanks for uploading vmlinux, will see the difference.
And sorry again, actually, it's just for my curiosity.
I'd like to know what difference this is.
On my environment GCC(4.2.4-1ubuntu3 and 4.3.2) generates same binary...

> 
> By the way Ingo has already added the revert to tip/master
> http://git.kernel.org/?p=linux/kernel/git/tip/linux-2.6-tip.git;a=commit;h=1d03950243904c89b8854c10516932b029c2a8fa

Yeah, Ingo knows what GCC does. I don't know so much.

Thanks,
Hiroshi

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Peter Annema]

Justin Madru <jdm64 <at> gawab.com> writes:
> Ok, finally bisected the bug, but the commit isn't related to networking!
> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> on current git and that fixed the bug.

...

>  #ifdef CONFIG_X86_32
> -asmlinkage int sys_rt_sigreturn(unsigned long __unused)
> +asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
>  {
> -       struct pt_regs *regs = (struct pt_regs *)&__unused;
> -
> -       return do_rt_sigreturn(regs);
> +       return do_rt_sigreturn(&regs);
>  }

Is sizeof(struct pt_regs) different from sizeof(unsigned long)? If so, is some
code somewhere messing with the stack and not expecting a struct pt_regs to have
been put on it?

Re: [bisected] 2.6.29-rc1 Firefox crashing on page load

[Heiko Carstens]

On Mon, Jan 19, 2009 at 04:32:32PM -0800, Justin Madru wrote:
> Justin P. Mattock wrote:
>> Justin Madru wrote:
> Ok, finally bisected the bug, but the commit isn't related to networking!
> I did: git revert 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> commit 4217458dafaa57d8e26a46f5d05ab8c53cf64191
> Author: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
> Date:   Fri Dec 5 17:17:09 2008 -0800
>
>    x86: signal: change type of paramter for sys_rt_sigreturn()
>
>    Impact: cleanup on 32-bit
>
>    Peter pointed this parameter can be changed.
>
>    Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
>    Signed-off-by: Ingo Molnar <mingo@elte.hu>
>
> :040000 040000 f5fba48247ff200092c38a54e334f495917229d5  
> b901159897e5d85e0dc2a0c9d904d9a73c1d58a2 M      arch
>
>    arch/x86/include/asm/syscalls.h
>    arch/x86/kernel/signal.c
>
> diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
> index b1f4d34..b1cc6da 100644 (file)
> --- a/arch/x86/kernel/signal.c
> +++ b/arch/x86/kernel/signal.c
> @@ -642,11 +642,9 @@ badframe:
> }
>
> #ifdef CONFIG_X86_32
> -asmlinkage int sys_rt_sigreturn(unsigned long __unused)
> +asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
> {
> -       struct pt_regs *regs = (struct pt_regs *)&__unused;

This probably should have been converted to

asmlinkage long sys_rt_sigreturn(void)
{
	struct pt_regs *regs = task_pt_regs(current);
	[...]

> -
> -       return do_rt_sigreturn(regs);
> +       return do_rt_sigreturn(&regs);
> }
> #else /* !CONFIG_X86_32 */
> asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)

Also there's no reason to have different sys_rt_sigreturn implementations
for 32 and 64 bit. They just could be merged with do_rt_sigreturn.