From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
To: Michael Bramer <michael@debsupport.de>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: Re: [PATCH] drivers/serial/8250_pci.c (add support for '8-port RS-232 MIC-3620 from advantech'
Date: Wed, 21 Jan 2009 10:18:05 +0200 [thread overview]
Message-ID: <4976DA3D.7050201@teltonika.lt> (raw)
In-Reply-To: <20090121075212.GA18485@deb-support.de>
Michael Bramer wrote:
> On Tue, Jan 20, 2009 at 06:12:16PM +0300, Andrey Panin wrote:
>> On 019, 01 19, 2009 at 11:51:22PM +0000, Michael Bramer wrote:
>>> On Mon, Jan 19, 2009 at 05:51:01PM +0300, Andrey Panin wrote:
>>>> On 018, 01 18, 2009 at 01:53:59PM +0000, Michael Bramer wrote:
>>>>> + * ADVANTECH
>>>>> + */
>>>>> + {
>>>>> + .vendor = PCI_VENDOR_ID_ADVANTECH,
>>>>> + .device = PCI_DEVICE_ID_ADVANTECH_PCI3620,
>>>>> + .subvendor = PCI_DEVICE_ID_ADVANTECH_PCI3620,
>>>>> + .subdevice = PCI_ANY_ID,
>>>>> + .setup = pci_default_setup,
>>>>> + },
>>>>> + /*
>>>>> * AFAVLAB cards - these may be called via parport_serial
>>>>> * It is not clear whether this applies to all products.
>>>>> */
>>>> This part is not needed at all, pci_default_setup() will be used by default.
>>> ok. I don't test this. But you are right. The last entry in
>>> pci_serial_quirks should catch it.
>>>
>>> Should I post a new patch, without this 10 lines?
>> Yes and add Signed-off-by: line please.
>
>
> the new patch:
> --------------
> This Patch add the device information for the
> MIC-3620 8-port RS-232 cPCI card from Advantech Co. Ltd.
>
> Signed-off-by: Michael Bramer <grisu@deb-support.de>
> --- a/drivers/serial/8250_pci.c
> +++ b/drivers/serial/8250_pci.c
> @@ -31,6 +31,7 @@
> #include "8250.h"
>
> #undef SERIAL_DEBUG_PCI
> +#define SERIAL_DEBUG_PCI
NAK.
> /*
> * init function returns:
> @@ -768,6 +769,8 @@
> #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
> #define PCI_SUBDEVICE_ID_POCTAL232 0x0308
> #define PCI_SUBDEVICE_ID_POCTAL422 0x0408
> +#define PCI_VENDOR_ID_ADVANTECH 0x13fe
> +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
>
> /*
> * Master list of serial port init/setup/exit quirks.
> @@ -2041,6 +2054,9 @@
> #endif
>
> static struct pci_device_id serial_pci_tbl[] = {
> + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
> + 0x3620, PCI_ANY_ID, 0, 0,
> + pbn_b2_8_921600 },
> { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
> PCI_SUBVENDOR_ID_CONNECT_TECH,
> PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
> --------------
>
> Gruss
> Grisu
next prev parent reply other threads:[~2009-01-21 8:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-18 13:53 [PATCH] drivers/serial/8250_pci.c (add support for '8-port RS-232 MIC-3620 from advantech' Michael Bramer
2009-01-18 14:14 ` Alan Cox
2009-01-19 11:45 ` Michael Bramer
2009-01-19 14:51 ` Andrey Panin
2009-01-19 23:51 ` Michael Bramer
2009-01-20 15:12 ` Andrey Panin
2009-01-21 7:52 ` Michael Bramer
2009-01-21 8:18 ` Paulius Zaleckas [this message]
2009-01-21 8:40 ` Niels de Vos
2009-01-21 12:32 ` Alan Cox
2009-01-21 23:42 ` Michael Bramer
2009-01-22 8:21 ` Tosoni
2009-01-22 9:03 ` Niels de Vos
2009-01-22 11:00 ` Michael Bramer
2009-01-22 11:47 ` Paulius Zaleckas
2009-01-22 16:44 ` Michael Bramer
2009-01-21 23:40 ` Michael Bramer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4976DA3D.7050201@teltonika.lt \
--to=paulius.zaleckas@teltonika.lt \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=michael@debsupport.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox