[PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Jeremy Fitzhardinge]

Hi Ingo,

This series implements a sequence of optimisations to reduce the
impact of enabling CONFIG_PARAVIRT while running native.

They are:
  (0. Move some Xen code around to make later changes work better.)

  1. For a number of the pvops, the native implemention is a simple
     identity function which returns its argument.  Add a specific
     paravirt identity function which the patcher can treat specially,
     by directly inlining the either nops (32-bit) or a mov (64-bit)
     into the instruction stream.

  2. When a pvop is called from asm code, it also provides a hint
     about what registers are available to be clobbered by the called
     code.  Until now, that information was ignored, and all
     caller-save registers were saved.  Now, don't bother
     saving/restoring registers which are clobberable.

  3. The C calling convention lists which registers the caller can
     expect to survive a function call, and which the callee is
     allowed to clobber.  The latter set is quite large, especially on
     64-bit.  This means that converting a pile of simple inline
     functions into function calls caused a lot more register
     pressure, making the generated code much worse.

     I introduce a new "callee-save" calling convention which makes
     only the return register (eax:edx on 32-bit, rax on 64)
     callee-clobberable; the callee must preserve all other registers,
     including the argument registers.

     This makes the callsites for these functions clobber many fewer
     registers, giving the compiler a chance to generate better code.

     Small asm functions, which generally only use one or two
     registers anyway, to be directly called.  C code can also be
     called via a thunk, which does the necessary register
     saving/restoring (generated by PV_CALLEE_SAVE_REGS_THUNK(func)).

     The irq enable/disable/save/restore functions are the first to
     make use of this calling convention, since they are the most
     commonly used in the kernel, and are also called form asm code.

  4. Convert the pte_val/make_pte identity functions to use the
     callee-save convention; they're only identity functions anyway,
     so they have no need to trash lots of registers.

I had to make some adjustments to VSMP and lguest to match the new
calling conventions.  I wasn't sure how I should change VMI, so I'm
waiting for Zach's input on that (VMI doesn't compile at the moment).

In testing, the net result was that the overhead dropped by about 75%,
though I found it hard to really get stable results.  The most obvious
improvement was a reduction in L2 references, presumably meaning that
L1 was getting a better hit rate.  Each of these transforms is an
unambigious improvement in generated code for the native case, so I'm
curious to see what other people see.

Thanks,
	J

[PATCH 1 of 7] xen: move remaining mmu-related stuff into mmu.c

[Jeremy Fitzhardinge]

A general cleanup, and lay the groundwork for later patches.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c |  731 ----------------------------------------------
 arch/x86/xen/mmu.c       |  700 ++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/mmu.h       |    3
 arch/x86/xen/xen-ops.h   |    8
 4 files changed, 712 insertions(+), 730 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -61,35 +61,6 @@
 enum xen_domain_type xen_domain_type = XEN_NATIVE;
 EXPORT_SYMBOL_GPL(xen_domain_type);
 
-/*
- * Identity map, in addition to plain kernel map.  This needs to be
- * large enough to allocate page table pages to allocate the rest.
- * Each page can map 2MB.
- */
-static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
-
-#ifdef CONFIG_X86_64
-/* l3 pud for userspace vsyscall mapping */
-static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
-#endif /* CONFIG_X86_64 */
-
-/*
- * Note about cr3 (pagetable base) values:
- *
- * xen_cr3 contains the current logical cr3 value; it contains the
- * last set cr3.  This may not be the current effective cr3, because
- * its update may be being lazily deferred.  However, a vcpu looking
- * at its own cr3 can use this value knowing that it everything will
- * be self-consistent.
- *
- * xen_current_cr3 contains the actual vcpu cr3; it is set once the
- * hypercall to set the vcpu cr3 is complete (so it may be a little
- * out of date, but it will never be set early).  If one vcpu is
- * looking at another vcpu's cr3 value, it should use this variable.
- */
-DEFINE_PER_CPU(unsigned long, xen_cr3);	 /* cr3 stored as physaddr */
-DEFINE_PER_CPU(unsigned long, xen_current_cr3);	 /* actual vcpu cr3 */
-
 struct start_info *xen_start_info;
 EXPORT_SYMBOL_GPL(xen_start_info);
 
@@ -237,7 +208,7 @@
 	return HYPERVISOR_get_debugreg(reg);
 }
 
-static void xen_leave_lazy(void)
+void xen_leave_lazy(void)
 {
 	paravirt_leave_lazy(paravirt_get_lazy_mode());
 	xen_mc_flush();
@@ -598,76 +569,6 @@
 
 #endif
 
-static void xen_flush_tlb(void)
-{
-	struct mmuext_op *op;
-	struct multicall_space mcs;
-
-	preempt_disable();
-
-	mcs = xen_mc_entry(sizeof(*op));
-
-	op = mcs.args;
-	op->cmd = MMUEXT_TLB_FLUSH_LOCAL;
-	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
-
-	xen_mc_issue(PARAVIRT_LAZY_MMU);
-
-	preempt_enable();
-}
-
-static void xen_flush_tlb_single(unsigned long addr)
-{
-	struct mmuext_op *op;
-	struct multicall_space mcs;
-
-	preempt_disable();
-
-	mcs = xen_mc_entry(sizeof(*op));
-	op = mcs.args;
-	op->cmd = MMUEXT_INVLPG_LOCAL;
-	op->arg1.linear_addr = addr & PAGE_MASK;
-	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
-
-	xen_mc_issue(PARAVIRT_LAZY_MMU);
-
-	preempt_enable();
-}
-
-static void xen_flush_tlb_others(const struct cpumask *cpus,
-				 struct mm_struct *mm, unsigned long va)
-{
-	struct {
-		struct mmuext_op op;
-		DECLARE_BITMAP(mask, NR_CPUS);
-	} *args;
-	struct multicall_space mcs;
-
-	BUG_ON(cpumask_empty(cpus));
-	BUG_ON(!mm);
-
-	mcs = xen_mc_entry(sizeof(*args));
-	args = mcs.args;
-	args->op.arg2.vcpumask = to_cpumask(args->mask);
-
-	/* Remove us, and any offline CPUS. */
-	cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
-	if (unlikely(cpumask_empty(to_cpumask(args->mask))))
-		goto issue;
-
-	if (va == TLB_FLUSH_ALL) {
-		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
-	} else {
-		args->op.cmd = MMUEXT_INVLPG_MULTI;
-		args->op.arg1.linear_addr = va;
-	}
-
-	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
-
-issue:
-	xen_mc_issue(PARAVIRT_LAZY_MMU);
-}
 
 static void xen_clts(void)
 {
@@ -693,21 +594,6 @@
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 }
 
-static void xen_write_cr2(unsigned long cr2)
-{
-	percpu_read(xen_vcpu)->arch.cr2 = cr2;
-}
-
-static unsigned long xen_read_cr2(void)
-{
-	return percpu_read(xen_vcpu)->arch.cr2;
-}
-
-static unsigned long xen_read_cr2_direct(void)
-{
-	return percpu_read(xen_vcpu_info.arch.cr2);
-}
-
 static void xen_write_cr4(unsigned long cr4)
 {
 	cr4 &= ~X86_CR4_PGE;
@@ -716,71 +602,6 @@
 	native_write_cr4(cr4);
 }
 
-static unsigned long xen_read_cr3(void)
-{
-	return percpu_read(xen_cr3);
-}
-
-static void set_current_cr3(void *v)
-{
-	percpu_write(xen_current_cr3, (unsigned long)v);
-}
-
-static void __xen_write_cr3(bool kernel, unsigned long cr3)
-{
-	struct mmuext_op *op;
-	struct multicall_space mcs;
-	unsigned long mfn;
-
-	if (cr3)
-		mfn = pfn_to_mfn(PFN_DOWN(cr3));
-	else
-		mfn = 0;
-
-	WARN_ON(mfn == 0 && kernel);
-
-	mcs = __xen_mc_entry(sizeof(*op));
-
-	op = mcs.args;
-	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
-	op->arg1.mfn = mfn;
-
-	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
-
-	if (kernel) {
-		percpu_write(xen_cr3, cr3);
-
-		/* Update xen_current_cr3 once the batch has actually
-		   been submitted. */
-		xen_mc_callback(set_current_cr3, (void *)cr3);
-	}
-}
-
-static void xen_write_cr3(unsigned long cr3)
-{
-	BUG_ON(preemptible());
-
-	xen_mc_batch();  /* disables interrupts */
-
-	/* Update while interrupts are disabled, so its atomic with
-	   respect to ipis */
-	percpu_write(xen_cr3, cr3);
-
-	__xen_write_cr3(true, cr3);
-
-#ifdef CONFIG_X86_64
-	{
-		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
-		if (user_pgd)
-			__xen_write_cr3(false, __pa(user_pgd));
-		else
-			__xen_write_cr3(false, 0);
-	}
-#endif
-
-	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
-}
-
 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 {
 	int ret;
@@ -822,185 +643,6 @@
 	return ret;
 }
 
-/* Early in boot, while setting up the initial pagetable, assume
-   everything is pinned. */
-static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
-{
-#ifdef CONFIG_FLATMEM
-	BUG_ON(mem_map);	/* should only be used early */
-#endif
-	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
-}
-
-/* Early release_pte assumes that all pts are pinned, since there's
-   only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
-{
-	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
-}
-
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
-{
-	struct mmuext_op op;
-	op.cmd = cmd;
-	op.arg1.mfn = pfn_to_mfn(pfn);
-	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
-		BUG();
-}
-
-/* This needs to make sure the new pte page is pinned iff its being
-   attached to a pinned pagetable. */
-static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level)
-{
-	struct page *page = pfn_to_page(pfn);
-
-	if (PagePinned(virt_to_page(mm->pgd))) {
-		SetPagePinned(page);
-
-		vm_unmap_aliases();
-		if (!PageHighMem(page)) {
-			make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
-			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
-				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
-		} else {
-			/* make sure there are no stray mappings of
-			   this page */
-			kmap_flush_unused();
-		}
-	}
-}
-
-static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn)
-{
-	xen_alloc_ptpage(mm, pfn, PT_PTE);
-}
-
-static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
-{
-	xen_alloc_ptpage(mm, pfn, PT_PMD);
-}
-
-static int xen_pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *pgd = mm->pgd;
-	int ret = 0;
-
-	BUG_ON(PagePinned(virt_to_page(pgd)));
-
-#ifdef CONFIG_X86_64
-	{
-		struct page *page = virt_to_page(pgd);
-		pgd_t *user_pgd;
-
-		BUG_ON(page->private != 0);
-
-		ret = -ENOMEM;
-
-		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-		page->private = (unsigned long)user_pgd;
-
-		if (user_pgd != NULL) {
-			user_pgd[pgd_index(VSYSCALL_START)] =
-				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
-			ret = 0;
-		}
-
-		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
-	}
-#endif
-
-	return ret;
-}
-
-static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-#ifdef CONFIG_X86_64
-	pgd_t *user_pgd = xen_get_user_pgd(pgd);
-
-	if (user_pgd)
-		free_page((unsigned long)user_pgd);
-#endif
-}
-
-/* This should never happen until we're OK to use struct page */
-static void xen_release_ptpage(unsigned long pfn, unsigned level)
-{
-	struct page *page = pfn_to_page(pfn);
-
-	if (PagePinned(page)) {
-		if (!PageHighMem(page)) {
-			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
-				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
-			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
-		}
-		ClearPagePinned(page);
-	}
-}
-
-static void xen_release_pte(unsigned long pfn)
-{
-	xen_release_ptpage(pfn, PT_PTE);
-}
-
-static void xen_release_pmd(unsigned long pfn)
-{
-	xen_release_ptpage(pfn, PT_PMD);
-}
-
-#if PAGETABLE_LEVELS == 4
-static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
-{
-	xen_alloc_ptpage(mm, pfn, PT_PUD);
-}
-
-static void xen_release_pud(unsigned long pfn)
-{
-	xen_release_ptpage(pfn, PT_PUD);
-}
-#endif
-
-#ifdef CONFIG_HIGHPTE
-static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
-{
-	pgprot_t prot = PAGE_KERNEL;
-
-	if (PagePinned(page))
-		prot = PAGE_KERNEL_RO;
-
-	if (0 && PageHighMem(page))
-		printk("mapping highpte %lx type %d prot %s\n",
-		       page_to_pfn(page), type,
-		       (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ");
-
-	return kmap_atomic_prot(page, type, prot);
-}
-#endif
-
-#ifdef CONFIG_X86_32
-static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
-{
-	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
-	if (pte_val_ma(*ptep) & _PAGE_PRESENT)
-		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
-			       pte_val_ma(pte));
-
-	return pte;
-}
-
-/* Init-time set_pte while constructing initial pagetables, which
-   doesn't allow RO pagetable pages to be remapped RW */
-static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
-{
-	pte = mask_rw_pte(ptep, pte);
-
-	xen_set_pte(ptep, pte);
-}
-#endif
-
-static __init void xen_pagetable_setup_start(pgd_t *base)
-{
-}
-
 void xen_setup_shared_info(void)
 {
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
@@ -1021,37 +663,6 @@
 	xen_setup_mfn_list_list();
 }
 
-static __init void xen_pagetable_setup_done(pgd_t *base)
-{
-	xen_setup_shared_info();
-}
-
-static __init void xen_post_allocator_init(void)
-{
-	pv_mmu_ops.set_pte = xen_set_pte;
-	pv_mmu_ops.set_pmd = xen_set_pmd;
-	pv_mmu_ops.set_pud = xen_set_pud;
-#if PAGETABLE_LEVELS == 4
-	pv_mmu_ops.set_pgd = xen_set_pgd;
-#endif
-
-	/* This will work as long as patching hasn't happened yet
-	   (which it hasn't) */
-	pv_mmu_ops.alloc_pte = xen_alloc_pte;
-	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
-	pv_mmu_ops.release_pte = xen_release_pte;
-	pv_mmu_ops.release_pmd = xen_release_pmd;
-#if PAGETABLE_LEVELS == 4
-	pv_mmu_ops.alloc_pud = xen_alloc_pud;
-	pv_mmu_ops.release_pud = xen_release_pud;
-#endif
-
-#ifdef CONFIG_X86_64
-	SetPagePinned(virt_to_page(level3_user_vsyscall));
-#endif
-	xen_mark_init_mm_pinned();
-}
-
 /* This is called once we have the cpu_possible_map */
 void xen_setup_vcpu_info_placement(void)
 {
@@ -1126,49 +737,6 @@
 	return ret;
 }
 
-static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
-{
-	pte_t pte;
-
-	phys >>= PAGE_SHIFT;
-
-	switch (idx) {
-	case FIX_BTMAP_END ... FIX_BTMAP_BEGIN:
-#ifdef CONFIG_X86_F00F_BUG
-	case FIX_F00F_IDT:
-#endif
-#ifdef CONFIG_X86_32
-	case FIX_WP_TEST:
-	case FIX_VDSO:
-# ifdef CONFIG_HIGHMEM
-	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
-# endif
-#else
-	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-	case FIX_APIC_BASE:	/* maps dummy local APIC */
-#endif
-		pte = pfn_pte(phys, prot);
-		break;
-
-	default:
-		pte = mfn_pte(phys, prot);
-		break;
-	}
-
-	__native_set_fixmap(idx, pte);
-
-#ifdef CONFIG_X86_64
-	/* Replicate changes to map the vsyscall page into the user
-	   pagetable vsyscall mapping. */
-	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
-		unsigned long vaddr = __fix_to_virt(idx);
-		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
-	}
-#endif
-}
-
 static const struct pv_info xen_info __initdata = {
 	.paravirt_enabled = 1,
 	.shared_kernel_pmd = 0,
@@ -1264,86 +832,6 @@
 #endif
 };
 
-static const struct pv_mmu_ops xen_mmu_ops __initdata = {
-	.pagetable_setup_start = xen_pagetable_setup_start,
-	.pagetable_setup_done = xen_pagetable_setup_done,
-
-	.read_cr2 = xen_read_cr2,
-	.write_cr2 = xen_write_cr2,
-
-	.read_cr3 = xen_read_cr3,
-	.write_cr3 = xen_write_cr3,
-
-	.flush_tlb_user = xen_flush_tlb,
-	.flush_tlb_kernel = xen_flush_tlb,
-	.flush_tlb_single = xen_flush_tlb_single,
-	.flush_tlb_others = xen_flush_tlb_others,
-
-	.pte_update = paravirt_nop,
-	.pte_update_defer = paravirt_nop,
-
-	.pgd_alloc = xen_pgd_alloc,
-	.pgd_free = xen_pgd_free,
-
-	.alloc_pte = xen_alloc_pte_init,
-	.release_pte = xen_release_pte_init,
-	.alloc_pmd = xen_alloc_pte_init,
-	.alloc_pmd_clone = paravirt_nop,
-	.release_pmd = xen_release_pte_init,
-
-#ifdef CONFIG_HIGHPTE
-	.kmap_atomic_pte = xen_kmap_atomic_pte,
-#endif
-
-#ifdef CONFIG_X86_64
-	.set_pte = xen_set_pte,
-#else
-	.set_pte = xen_set_pte_init,
-#endif
-	.set_pte_at = xen_set_pte_at,
-	.set_pmd = xen_set_pmd_hyper,
-
-	.ptep_modify_prot_start = __ptep_modify_prot_start,
-	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
-
-	.pte_val = xen_pte_val,
-	.pgd_val = xen_pgd_val,
-
-	.make_pte = xen_make_pte,
-	.make_pgd = xen_make_pgd,
-
-#ifdef CONFIG_X86_PAE
-	.set_pte_atomic = xen_set_pte_atomic,
-	.set_pte_present = xen_set_pte_at,
-	.pte_clear = xen_pte_clear,
-	.pmd_clear = xen_pmd_clear,
-#endif	/* CONFIG_X86_PAE */
-	.set_pud = xen_set_pud_hyper,
-
-	.make_pmd = xen_make_pmd,
-	.pmd_val = xen_pmd_val,
-
-#if PAGETABLE_LEVELS == 4
-	.pud_val = xen_pud_val,
-	.make_pud = xen_make_pud,
-	.set_pgd = xen_set_pgd_hyper,
-
-	.alloc_pud = xen_alloc_pte_init,
-	.release_pud = xen_release_pte_init,
-#endif	/* PAGETABLE_LEVELS == 4 */
-
-	.activate_mm = xen_activate_mm,
-	.dup_mmap = xen_dup_mmap,
-	.exit_mmap = xen_exit_mmap,
-
-	.lazy_mode = {
-		.enter = paravirt_enter_lazy_mmu,
-		.leave = xen_leave_lazy,
-	},
-
-	.set_fixmap = xen_set_fixmap,
-};
-
 static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
@@ -1386,223 +874,6 @@
 };
 
 
-static void __init xen_reserve_top(void)
-{
-#ifdef CONFIG_X86_32
-	unsigned long top = HYPERVISOR_VIRT_START;
-	struct xen_platform_parameters pp;
-
-	if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
-		top = pp.virt_start;
-
-	reserve_top_address(-top);
-#endif	/* CONFIG_X86_32 */
-}
-
-/*
- * Like __va(), but returns address in the kernel mapping (which is
- * all we have until the physical memory mapping has been set up.
- */
-static void *__ka(phys_addr_t paddr)
-{
-#ifdef CONFIG_X86_64
-	return (void *)(paddr + __START_KERNEL_map);
-#else
-	return __va(paddr);
-#endif
-}
-
-/* Convert a machine address to physical address */
-static unsigned long m2p(phys_addr_t maddr)
-{
-	phys_addr_t paddr;
-
-	maddr &= PTE_PFN_MASK;
-	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
-
-	return paddr;
-}
-
-/* Convert a machine address to kernel virtual */
-static void *m2v(phys_addr_t maddr)
-{
-	return __ka(m2p(maddr));
-}
-
-static void set_page_prot(void *addr, pgprot_t prot)
-{
-	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
-	pte_t pte = pfn_pte(pfn, prot);
-
-	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
-		BUG();
-}
-
-static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
-{
-	unsigned pmdidx, pteidx;
-	unsigned ident_pte;
-	unsigned long pfn;
-
-	ident_pte = 0;
-	pfn = 0;
-	for (pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
-		pte_t *pte_page;
-
-		/* Reuse or allocate a page of ptes */
-		if (pmd_present(pmd[pmdidx]))
-			pte_page = m2v(pmd[pmdidx].pmd);
-		else {
-			/* Check for free pte pages */
-			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
-				break;
-
-			pte_page = &level1_ident_pgt[ident_pte];
-			ident_pte += PTRS_PER_PTE;
-
-			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
-		}
-
-		/* Install mappings */
-		for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
-			pte_t pte;
-
-			if (pfn > max_pfn_mapped)
-				max_pfn_mapped = pfn;
-
-			if (!pte_none(pte_page[pteidx]))
-				continue;
-
-			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
-			pte_page[pteidx] = pte;
-		}
-	}
-
-	for (pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
-		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
-
-	set_page_prot(pmd, PAGE_KERNEL_RO);
-}
-
-#ifdef CONFIG_X86_64
-static void convert_pfn_mfn(void *v)
-{
-	pte_t *pte = v;
-	int i;
-
-	/* All levels are converted the same way, so just treat them
-	   as ptes. */
-	for (i = 0; i < PTRS_PER_PTE; i++)
-		pte[i] = xen_make_pte(pte[i].pte);
-}
-
-/*
- * Set up the inital kernel pagetable.
- *
- * We can construct this by grafting the Xen provided pagetable into
- * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
- * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
- * means that only the kernel has a physical mapping to start with -
- * but that's enough to get __va working.  We need to fill in the rest
- * of the physical mapping once some sort of allocator has been set
- * up.
- */
-static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
-						unsigned long max_pfn)
-{
-	pud_t *l3;
-	pmd_t *l2;
-
-	/* Zap identity mapping */
-	init_level4_pgt[0] = __pgd(0);
-
-	/* Pre-constructed entries are in pfn, so convert to mfn */
-	convert_pfn_mfn(init_level4_pgt);
-	convert_pfn_mfn(level3_ident_pgt);
-	convert_pfn_mfn(level3_kernel_pgt);
-
-	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
-	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
-
-	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
-	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
-	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	/* Set up identity map */
-	xen_map_identity_early(level2_ident_pgt, max_pfn);
-
-	/* Make pagetable pieces RO */
-	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
-
-	/* Pin down new L4 */
-	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
-			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
-
-	/* Unpin Xen-provided one */
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
-
-	/* Switch over */
-	pgd = init_level4_pgt;
-
-	/*
-	 * At this stage there can be no user pgd, and no page
-	 * structure to attach it to, so make sure we just set kernel
-	 * pgd.
-	 */
-	xen_mc_batch();
-	__xen_write_cr3(true, __pa(pgd));
-	xen_mc_issue(PARAVIRT_LAZY_CPU);
-
-	reserve_early(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
-
-	return pgd;
-}
-#else	/* !CONFIG_X86_64 */
-static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
-
-static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
-						unsigned long max_pfn)
-{
-	pmd_t *kernel_pmd;
-
-	init_pg_tables_start = __pa(pgd);
-	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
-	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
-
-	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	xen_map_identity_early(level2_kernel_pgt, max_pfn);
-
-	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
-	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
-			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
-
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
-	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
-
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
-
-	xen_write_cr3(__pa(swapper_pg_dir));
-
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
-
-	return swapper_pg_dir;
-}
-#endif	/* CONFIG_X86_64 */
-
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -47,6 +47,7 @@
 #include <asm/tlbflush.h>
 #include <asm/fixmap.h>
 #include <asm/mmu_context.h>
+#include <asm/setup.h>
 #include <asm/paravirt.h>
 #include <asm/linkage.h>
 
@@ -55,6 +56,8 @@
 
 #include <xen/page.h>
 #include <xen/interface/xen.h>
+#include <xen/interface/version.h>
+#include <xen/hvc-console.h>
 
 #include "multicalls.h"
 #include "mmu.h"
@@ -114,6 +117,37 @@
 
 #endif /* CONFIG_XEN_DEBUG_FS */
 
+
+/*
+ * Identity map, in addition to plain kernel map.  This needs to be
+ * large enough to allocate page table pages to allocate the rest.
+ * Each page can map 2MB.
+ */
+static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
+
+#ifdef CONFIG_X86_64
+/* l3 pud for userspace vsyscall mapping */
+static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
+#endif /* CONFIG_X86_64 */
+
+/*
+ * Note about cr3 (pagetable base) values:
+ *
+ * xen_cr3 contains the current logical cr3 value; it contains the
+ * last set cr3.  This may not be the current effective cr3, because
+ * its update may be being lazily deferred.  However, a vcpu looking
+ * at its own cr3 can use this value knowing that it everything will
+ * be self-consistent.
+ *
+ * xen_current_cr3 contains the actual vcpu cr3; it is set once the
+ * hypercall to set the vcpu cr3 is complete (so it may be a little
+ * out of date, but it will never be set early).  If one vcpu is
+ * looking at another vcpu's cr3 value, it should use this variable.
+ */
+DEFINE_PER_CPU(unsigned long, xen_cr3);	 /* cr3 stored as physaddr */
+DEFINE_PER_CPU(unsigned long, xen_current_cr3);	 /* actual vcpu cr3 */
+
+
 /*
  * Just beyond the highest usermode address.  STACK_TOP_MAX has a
  * redzone above it, so round it up to a PGD boundary.
@@ -1152,6 +1186,672 @@
 	spin_unlock(&mm->page_table_lock);
 }
 
+static __init void xen_pagetable_setup_start(pgd_t *base)
+{
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+	xen_setup_shared_info();
+}
+
+static void xen_write_cr2(unsigned long cr2)
+{
+	percpu_read(xen_vcpu)->arch.cr2 = cr2;
+}
+
+static unsigned long xen_read_cr2(void)
+{
+	return percpu_read(xen_vcpu)->arch.cr2;
+}
+
+unsigned long xen_read_cr2_direct(void)
+{
+	return percpu_read(xen_vcpu_info.arch.cr2);
+}
+
+static void xen_flush_tlb(void)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+
+	preempt_disable();
+
+	mcs = xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = MMUEXT_TLB_FLUSH_LOCAL;
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+static void xen_flush_tlb_single(unsigned long addr)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+
+	preempt_disable();
+
+	mcs = xen_mc_entry(sizeof(*op));
+	op = mcs.args;
+	op->cmd = MMUEXT_INVLPG_LOCAL;
+	op->arg1.linear_addr = addr & PAGE_MASK;
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+static void xen_flush_tlb_others(const struct cpumask *cpus,
+				 struct mm_struct *mm, unsigned long va)
+{
+	struct {
+		struct mmuext_op op;
+		DECLARE_BITMAP(mask, NR_CPUS);
+	} *args;
+	struct multicall_space mcs;
+
+	BUG_ON(cpumask_empty(cpus));
+	BUG_ON(!mm);
+
+	mcs = xen_mc_entry(sizeof(*args));
+	args = mcs.args;
+	args->op.arg2.vcpumask = to_cpumask(args->mask);
+
+	/* Remove us, and any offline CPUS. */
+	cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
+	if (unlikely(cpumask_empty(to_cpumask(args->mask))))
+		goto issue;
+
+	if (va == TLB_FLUSH_ALL) {
+		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
+	} else {
+		args->op.cmd = MMUEXT_INVLPG_MULTI;
+		args->op.arg1.linear_addr = va;
+	}
+
+	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
+
+issue:
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
+static unsigned long xen_read_cr3(void)
+{
+	return percpu_read(xen_cr3);
+}
+
+static void set_current_cr3(void *v)
+{
+	percpu_write(xen_current_cr3, (unsigned long)v);
+}
+
+static void __xen_write_cr3(bool kernel, unsigned long cr3)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+	unsigned long mfn;
+
+	if (cr3)
+		mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	else
+		mfn = 0;
+
+	WARN_ON(mfn == 0 && kernel);
+
+	mcs = __xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
+	op->arg1.mfn = mfn;
+
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	if (kernel) {
+		percpu_write(xen_cr3, cr3);
+
+		/* Update xen_current_cr3 once the batch has actually
+		   been submitted. */
+		xen_mc_callback(set_current_cr3, (void *)cr3);
+	}
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+	BUG_ON(preemptible());
+
+	xen_mc_batch();  /* disables interrupts */
+
+	/* Update while interrupts are disabled, so its atomic with
+	   respect to ipis */
+	percpu_write(xen_cr3, cr3);
+
+	__xen_write_cr3(true, cr3);
+
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+		if (user_pgd)
+			__xen_write_cr3(false, __pa(user_pgd));
+		else
+			__xen_write_cr3(false, 0);
+	}
+#endif
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
+}
+
+static int xen_pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = mm->pgd;
+	int ret = 0;
+
+	BUG_ON(PagePinned(virt_to_page(pgd)));
+
+#ifdef CONFIG_X86_64
+	{
+		struct page *page = virt_to_page(pgd);
+		pgd_t *user_pgd;
+
+		BUG_ON(page->private != 0);
+
+		ret = -ENOMEM;
+
+		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		page->private = (unsigned long)user_pgd;
+
+		if (user_pgd != NULL) {
+			user_pgd[pgd_index(VSYSCALL_START)] =
+				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+			ret = 0;
+		}
+
+		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+	}
+#endif
+
+	return ret;
+}
+
+static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_X86_64
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+	if (user_pgd)
+		free_page((unsigned long)user_pgd);
+#endif
+}
+
+
+/* Early in boot, while setting up the initial pagetable, assume
+   everything is pinned. */
+static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
+{
+#ifdef CONFIG_FLATMEM
+	BUG_ON(mem_map);	/* should only be used early */
+#endif
+	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+}
+
+/* Early release_pte assumes that all pts are pinned, since there's
+   only init_mm and anything attached to that is pinned. */
+static void xen_release_pte_init(unsigned long pfn)
+{
+	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
+}
+
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+	struct mmuext_op op;
+	op.cmd = cmd;
+	op.arg1.mfn = pfn_to_mfn(pfn);
+	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+		BUG();
+}
+
+/* This needs to make sure the new pte page is pinned iff its being
+   attached to a pinned pagetable. */
+static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level)
+{
+	struct page *page = pfn_to_page(pfn);
+
+	if (PagePinned(virt_to_page(mm->pgd))) {
+		SetPagePinned(page);
+
+		vm_unmap_aliases();
+		if (!PageHighMem(page)) {
+			make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
+			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
+				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+		} else {
+			/* make sure there are no stray mappings of
+			   this page */
+			kmap_flush_unused();
+		}
+	}
+}
+
+static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PTE);
+}
+
+static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PMD);
+}
+
+/* This should never happen until we're OK to use struct page */
+static void xen_release_ptpage(unsigned long pfn, unsigned level)
+{
+	struct page *page = pfn_to_page(pfn);
+
+	if (PagePinned(page)) {
+		if (!PageHighMem(page)) {
+			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
+				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
+		}
+		ClearPagePinned(page);
+	}
+}
+
+static void xen_release_pte(unsigned long pfn)
+{
+	xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pmd(unsigned long pfn)
+{
+	xen_release_ptpage(pfn, PT_PMD);
+}
+
+#if PAGETABLE_LEVELS == 4
+static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PUD);
+}
+
+static void xen_release_pud(unsigned long pfn)
+{
+	xen_release_ptpage(pfn, PT_PUD);
+}
+#endif
+
+void __init xen_reserve_top(void)
+{
+#ifdef CONFIG_X86_32
+	unsigned long top = HYPERVISOR_VIRT_START;
+	struct xen_platform_parameters pp;
+
+	if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
+		top = pp.virt_start;
+
+	reserve_top_address(-top);
+#endif	/* CONFIG_X86_32 */
+}
+
+/*
+ * Like __va(), but returns address in the kernel mapping (which is
+ * all we have until the physical memory mapping has been set up.
+ */
+static void *__ka(phys_addr_t paddr)
+{
+#ifdef CONFIG_X86_64
+	return (void *)(paddr + __START_KERNEL_map);
+#else
+	return __va(paddr);
+#endif
+}
+
+/* Convert a machine address to physical address */
+static unsigned long m2p(phys_addr_t maddr)
+{
+	phys_addr_t paddr;
+
+	maddr &= PTE_PFN_MASK;
+	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
+
+	return paddr;
+}
+
+/* Convert a machine address to kernel virtual */
+static void *m2v(phys_addr_t maddr)
+{
+	return __ka(m2p(maddr));
+}
+
+static void set_page_prot(void *addr, pgprot_t prot)
+{
+	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
+	pte_t pte = pfn_pte(pfn, prot);
+
+	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
+		BUG();
+}
+
+static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+{
+	unsigned pmdidx, pteidx;
+	unsigned ident_pte;
+	unsigned long pfn;
+
+	ident_pte = 0;
+	pfn = 0;
+	for (pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
+		pte_t *pte_page;
+
+		/* Reuse or allocate a page of ptes */
+		if (pmd_present(pmd[pmdidx]))
+			pte_page = m2v(pmd[pmdidx].pmd);
+		else {
+			/* Check for free pte pages */
+			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
+				break;
+
+			pte_page = &level1_ident_pgt[ident_pte];
+			ident_pte += PTRS_PER_PTE;
+
+			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
+		}
+
+		/* Install mappings */
+		for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
+			pte_t pte;
+
+			if (pfn > max_pfn_mapped)
+				max_pfn_mapped = pfn;
+
+			if (!pte_none(pte_page[pteidx]))
+				continue;
+
+			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
+			pte_page[pteidx] = pte;
+		}
+	}
+
+	for (pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
+		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
+
+	set_page_prot(pmd, PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_X86_64
+static void convert_pfn_mfn(void *v)
+{
+	pte_t *pte = v;
+	int i;
+
+	/* All levels are converted the same way, so just treat them
+	   as ptes. */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		pte[i] = xen_make_pte(pte[i].pte);
+}
+
+/*
+ * Set up the inital kernel pagetable.
+ *
+ * We can construct this by grafting the Xen provided pagetable into
+ * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
+ * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
+ * means that only the kernel has a physical mapping to start with -
+ * but that's enough to get __va working.  We need to fill in the rest
+ * of the physical mapping once some sort of allocator has been set
+ * up.
+ */
+__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+					 unsigned long max_pfn)
+{
+	pud_t *l3;
+	pmd_t *l2;
+
+	/* Zap identity mapping */
+	init_level4_pgt[0] = __pgd(0);
+
+	/* Pre-constructed entries are in pfn, so convert to mfn */
+	convert_pfn_mfn(init_level4_pgt);
+	convert_pfn_mfn(level3_ident_pgt);
+	convert_pfn_mfn(level3_kernel_pgt);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
+
+	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
+	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	/* Set up identity map */
+	xen_map_identity_early(level2_ident_pgt, max_pfn);
+
+	/* Make pagetable pieces RO */
+	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+
+	/* Pin down new L4 */
+	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+	/* Unpin Xen-provided one */
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	/* Switch over */
+	pgd = init_level4_pgt;
+
+	/*
+	 * At this stage there can be no user pgd, and no page
+	 * structure to attach it to, so make sure we just set kernel
+	 * pgd.
+	 */
+	xen_mc_batch();
+	__xen_write_cr3(true, __pa(pgd));
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
+	return pgd;
+}
+#else	/* !CONFIG_X86_64 */
+static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
+
+__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+					 unsigned long max_pfn)
+{
+	pmd_t *kernel_pmd;
+
+	init_pg_tables_start = __pa(pgd);
+	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
+
+	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
+	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+
+	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
+			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	xen_write_cr3(__pa(swapper_pg_dir));
+
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+
+	return swapper_pg_dir;
+}
+#endif	/* CONFIG_X86_64 */
+
+static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
+{
+	pte_t pte;
+
+	phys >>= PAGE_SHIFT;
+
+	switch (idx) {
+	case FIX_BTMAP_END ... FIX_BTMAP_BEGIN:
+#ifdef CONFIG_X86_F00F_BUG
+	case FIX_F00F_IDT:
+#endif
+#ifdef CONFIG_X86_32
+	case FIX_WP_TEST:
+	case FIX_VDSO:
+# ifdef CONFIG_HIGHMEM
+	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
+# endif
+#else
+	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	case FIX_APIC_BASE:	/* maps dummy local APIC */
+#endif
+		pte = pfn_pte(phys, prot);
+		break;
+
+	default:
+		pte = mfn_pte(phys, prot);
+		break;
+	}
+
+	__native_set_fixmap(idx, pte);
+
+#ifdef CONFIG_X86_64
+	/* Replicate changes to map the vsyscall page into the user
+	   pagetable vsyscall mapping. */
+	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
+		unsigned long vaddr = __fix_to_virt(idx);
+		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
+	}
+#endif
+}
+
+__init void xen_post_allocator_init(void)
+{
+	pv_mmu_ops.set_pte = xen_set_pte;
+	pv_mmu_ops.set_pmd = xen_set_pmd;
+	pv_mmu_ops.set_pud = xen_set_pud;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.set_pgd = xen_set_pgd;
+#endif
+
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	pv_mmu_ops.alloc_pte = xen_alloc_pte;
+	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
+	pv_mmu_ops.release_pte = xen_release_pte;
+	pv_mmu_ops.release_pmd = xen_release_pmd;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.alloc_pud = xen_alloc_pud;
+	pv_mmu_ops.release_pud = xen_release_pud;
+#endif
+
+#ifdef CONFIG_X86_64
+	SetPagePinned(virt_to_page(level3_user_vsyscall));
+#endif
+	xen_mark_init_mm_pinned();
+}
+
+
+const struct pv_mmu_ops xen_mmu_ops __initdata = {
+	.pagetable_setup_start = xen_pagetable_setup_start,
+	.pagetable_setup_done = xen_pagetable_setup_done,
+
+	.read_cr2 = xen_read_cr2,
+	.write_cr2 = xen_write_cr2,
+
+	.read_cr3 = xen_read_cr3,
+	.write_cr3 = xen_write_cr3,
+
+	.flush_tlb_user = xen_flush_tlb,
+	.flush_tlb_kernel = xen_flush_tlb,
+	.flush_tlb_single = xen_flush_tlb_single,
+	.flush_tlb_others = xen_flush_tlb_others,
+
+	.pte_update = paravirt_nop,
+	.pte_update_defer = paravirt_nop,
+
+	.pgd_alloc = xen_pgd_alloc,
+	.pgd_free = xen_pgd_free,
+
+	.alloc_pte = xen_alloc_pte_init,
+	.release_pte = xen_release_pte_init,
+	.alloc_pmd = xen_alloc_pte_init,
+	.alloc_pmd_clone = paravirt_nop,
+	.release_pmd = xen_release_pte_init,
+
+#ifdef CONFIG_HIGHPTE
+	.kmap_atomic_pte = xen_kmap_atomic_pte,
+#endif
+
+#ifdef CONFIG_X86_64
+	.set_pte = xen_set_pte,
+#else
+	.set_pte = xen_set_pte_init,
+#endif
+	.set_pte_at = xen_set_pte_at,
+	.set_pmd = xen_set_pmd_hyper,
+
+	.ptep_modify_prot_start = __ptep_modify_prot_start,
+	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
+
+	.pte_val = xen_pte_val,
+	.pgd_val = xen_pgd_val,
+
+	.make_pte = xen_make_pte,
+	.make_pgd = xen_make_pgd,
+
+#ifdef CONFIG_X86_PAE
+	.set_pte_atomic = xen_set_pte_atomic,
+	.set_pte_present = xen_set_pte_at,
+	.pte_clear = xen_pte_clear,
+	.pmd_clear = xen_pmd_clear,
+#endif	/* CONFIG_X86_PAE */
+	.set_pud = xen_set_pud_hyper,
+
+	.make_pmd = xen_make_pmd,
+	.pmd_val = xen_pmd_val,
+
+#if PAGETABLE_LEVELS == 4
+	.pud_val = xen_pud_val,
+	.make_pud = xen_make_pud,
+	.set_pgd = xen_set_pgd_hyper,
+
+	.alloc_pud = xen_alloc_pte_init,
+	.release_pud = xen_release_pte_init,
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+	.activate_mm = xen_activate_mm,
+	.dup_mmap = xen_dup_mmap,
+	.exit_mmap = xen_exit_mmap,
+
+	.lazy_mode = {
+		.enter = paravirt_enter_lazy_mmu,
+		.leave = xen_leave_lazy,
+	},
+
+	.set_fixmap = xen_set_fixmap,
+};
+
+
 #ifdef CONFIG_XEN_DEBUG_FS
 
 static struct dentry *d_mmu_debug;
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -54,4 +54,7 @@
 void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 				  pte_t *ptep, pte_t pte);
 
+unsigned long xen_read_cr2_direct(void);
+
+extern const struct pv_mmu_ops xen_mmu_ops;
 #endif	/* _XEN_MMU_H */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -13,6 +13,7 @@
 struct trap_info;
 void xen_copy_trap_info(struct trap_info *traps);
 
+DECLARE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 DECLARE_PER_CPU(unsigned long, xen_cr3);
 DECLARE_PER_CPU(unsigned long, xen_current_cr3);
 
@@ -22,6 +23,13 @@
 
 void xen_setup_mfn_list_list(void);
 void xen_setup_shared_info(void);
+void xen_setup_machphys_mapping(void);
+pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
+void xen_ident_map_ISA(void);
+void xen_reserve_top(void);
+
+void xen_leave_lazy(void);
+void xen_post_allocator_init(void);
 
 char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);

[PATCH 2 of 7] x86/pvops: add a paravirt_ident functions to allow special patching

[Jeremy Fitzhardinge]

Several paravirt ops implementations simply return their arguments,
the most obvious being the make_pte/pte_val class of operations on
native.

On 32-bit, the identity function is literally a no-op, as the calling
convention uses the same registers for the first argument and return.
On 64-bit, it can be implemented with a single "mov".

This patch adds special identity functions for 32 and 64 bit argument,
and machinery to recognize them and replace them with either nops or a
mov as appropriate.

At the moment, the only users for the identity functions are the
pagetable entry conversion functions.

The result is a measureable improvement on pagetable-heavy benchmarks
(2-3%, reducing the pvops overhead from 5 to 2%).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h     |    5 ++
 arch/x86/kernel/paravirt.c          |   75 ++++++++++++++++++++++++++++++-----
 arch/x86/kernel/paravirt_patch_32.c |   12 +++++
 arch/x86/kernel/paravirt_patch_64.c |   15 +++++++
 4 files changed, 98 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -388,6 +388,8 @@
 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
 
 unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
 unsigned paravirt_patch_ignore(unsigned len);
 unsigned paravirt_patch_call(void *insnbuf,
 			     const void *target, u16 tgt_clobbers,
@@ -1371,6 +1373,9 @@
 }
 
 void _paravirt_nop(void);
+u32 _paravirt_ident_32(u32);
+u64 _paravirt_ident_64(u64);
+
 #define paravirt_nop	((void *)_paravirt_nop)
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -44,6 +44,17 @@
 {
 }
 
+/* identity function, which can be inlined */
+u32 _paravirt_ident_32(u32 x)
+{
+	return x;
+}
+
+u64 _paravirt_ident_64(u64 x)
+{
+	return x;
+}
+
 static void __init default_banner(void)
 {
 	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
@@ -138,9 +149,16 @@
 	if (opfunc == NULL)
 		/* If there's no function, patch it with a ud2a (BUG) */
 		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
-	else if (opfunc == paravirt_nop)
+	else if (opfunc == _paravirt_nop)
 		/* If the operation is a nop, then nop the callsite */
 		ret = paravirt_patch_nop();
+
+	/* identity functions just return their single argument */
+	else if (opfunc == _paravirt_ident_32)
+		ret = paravirt_patch_ident_32(insnbuf, len);
+	else if (opfunc == _paravirt_ident_64)
+		ret = paravirt_patch_ident_64(insnbuf, len);
+
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
 		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
 		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
@@ -373,6 +391,45 @@
 #endif
 };
 
+typedef pte_t make_pte_t(pteval_t);
+typedef pmd_t make_pmd_t(pmdval_t);
+typedef pud_t make_pud_t(pudval_t);
+typedef pgd_t make_pgd_t(pgdval_t);
+
+typedef pteval_t pte_val_t(pte_t);
+typedef pmdval_t pmd_val_t(pmd_t);
+typedef pudval_t pud_val_t(pud_t);
+typedef pgdval_t pgd_val_t(pgd_t);
+
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
+/* 32-bit pagetable entries */
+#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_32
+#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_32
+
+#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_32
+#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_32
+
+#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_32
+#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_32
+
+#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_32
+#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_32
+#else
+/* 64-bit pagetable entries */
+#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_64
+#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_64
+
+#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_64
+#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_64
+
+#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_64
+#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_64
+
+#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_64
+#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_64
+#endif
+
 struct pv_mmu_ops pv_mmu_ops = {
 #ifndef CONFIG_X86_64
 	.pagetable_setup_start = native_pagetable_setup_start,
@@ -424,21 +481,21 @@
 	.pmd_clear = native_pmd_clear,
 #endif
 	.set_pud = native_set_pud,
-	.pmd_val = native_pmd_val,
-	.make_pmd = native_make_pmd,
+	.pmd_val = paravirt_native_pmd_val,
+	.make_pmd = paravirt_native_make_pmd,
 
 #if PAGETABLE_LEVELS == 4
-	.pud_val = native_pud_val,
-	.make_pud = native_make_pud,
+	.pud_val = paravirt_native_pud_val,
+	.make_pud = paravirt_native_make_pud,
 	.set_pgd = native_set_pgd,
 #endif
 #endif /* PAGETABLE_LEVELS >= 3 */
 
-	.pte_val = native_pte_val,
-	.pgd_val = native_pgd_val,
+	.pte_val = paravirt_native_pte_val,
+	.pgd_val = paravirt_native_pgd_val,
 
-	.make_pte = native_make_pte,
-	.make_pgd = native_make_pgd,
+	.make_pte = paravirt_native_make_pte,
+	.make_pgd = paravirt_native_make_pgd,
 
 	.dup_mmap = paravirt_nop,
 	.exit_mmap = paravirt_nop,
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -12,6 +12,18 @@
 DEF_NATIVE(pv_cpu_ops, clts, "clts");
 DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
 
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len)
+{
+	/* arg in %eax, return in %eax */
+	return 0;
+}
+
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len)
+{
+	/* arg in %edx:%eax, return in %edx:%eax */
+	return 0;
+}
+
 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		      unsigned long addr, unsigned len)
 {
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -19,6 +19,21 @@
 DEF_NATIVE(pv_cpu_ops, usergs_sysret32, "swapgs; sysretl");
 DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
 
+DEF_NATIVE(, mov32, "mov %edi, %eax");
+DEF_NATIVE(, mov64, "mov %rdi, %rax");
+
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len)
+{
+	return paravirt_patch_insns(insnbuf, len,
+				    start__mov32, end__mov32);
+}
+
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len)
+{
+	return paravirt_patch_insns(insnbuf, len,
+				    start__mov64, end__mov64);
+}
+
 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		      unsigned long addr, unsigned len)
 {

[PATCH 3 of 7] x86: fix paravirt clobber in entry_64.S

[Jeremy Fitzhardinge]

The clobber is trying to say that anything except RDI is available for
clobbering, but actually clobbers everything.  This hasn't mattered
because the clobbers were basically ignored, but subsequent patches
will rely on them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/entry_64.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1147,7 +1147,7 @@
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
-	DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
+	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
 	SWAPGS
 gs_change:
 	movl %edi,%gs

[PATCH 4 of 7] x86/paravirt: selectively save/restore regs around pvops calls

[Jeremy Fitzhardinge]

Each asm paravirt-ops call says what registers are available for
clobbering.  This patch makes use of this to selectively save/restore
registers around each pvops call.  In many cases this significantly
shrinks code size.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h |  100 +++++++++++++++++++++++++--------------
 1 file changed, 65 insertions(+), 35 deletions(-)

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -12,19 +12,29 @@
 #define CLBR_EAX  (1 << 0)
 #define CLBR_ECX  (1 << 1)
 #define CLBR_EDX  (1 << 2)
+#define CLBR_EDI  (1 << 3)
 
-#ifdef CONFIG_X86_64
-#define CLBR_RSI  (1 << 3)
-#define CLBR_RDI  (1 << 4)
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 4) - 1)
+#else
+#define CLBR_RAX  CLBR_EAX
+#define CLBR_RCX  CLBR_ECX
+#define CLBR_RDX  CLBR_EDX
+#define CLBR_RDI  CLBR_EDI
+#define CLBR_RSI  (1 << 4)
 #define CLBR_R8   (1 << 5)
 #define CLBR_R9   (1 << 6)
 #define CLBR_R10  (1 << 7)
 #define CLBR_R11  (1 << 8)
 #define CLBR_ANY  ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+			 CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG	(CLBR_RAX | CLBR_RDX)
+#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
+
 #include <asm/desc_defs.h>
-#else
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 3) - 1)
 #endif /* X86_64 */
 
 #ifndef __ASSEMBLY__
@@ -1528,33 +1538,49 @@
 	.popsection
 
 
+#define COND_PUSH(set, mask, reg)			\
+	.if ((~set) & mask); push %reg; .endif
+#define COND_POP(set, mask, reg)			\
+	.if ((~set) & mask); pop %reg; .endif
+
 #ifdef CONFIG_X86_64
-#define PV_SAVE_REGS				\
-	push %rax;				\
-	push %rcx;				\
-	push %rdx;				\
-	push %rsi;				\
-	push %rdi;				\
-	push %r8;				\
-	push %r9;				\
-	push %r10;				\
-	push %r11
-#define PV_RESTORE_REGS				\
-	pop %r11;				\
-	pop %r10;				\
-	pop %r9;				\
-	pop %r8;				\
-	pop %rdi;				\
-	pop %rsi;				\
-	pop %rdx;				\
-	pop %rcx;				\
-	pop %rax
+
+#define PV_SAVE_REGS(set)			\
+	COND_PUSH(set, CLBR_RAX, rax);		\
+	COND_PUSH(set, CLBR_RCX, rcx);		\
+	COND_PUSH(set, CLBR_RDX, rdx);		\
+	COND_PUSH(set, CLBR_RSI, rsi);		\
+	COND_PUSH(set, CLBR_RDI, rdi);		\
+	COND_PUSH(set, CLBR_R8, r8);		\
+	COND_PUSH(set, CLBR_R9, r9);		\
+	COND_PUSH(set, CLBR_R10, r10);		\
+	COND_PUSH(set, CLBR_R11, r11)
+#define PV_RESTORE_REGS(set)			\
+	COND_POP(set, CLBR_R11, r11);		\
+	COND_POP(set, CLBR_R10, r10);		\
+	COND_POP(set, CLBR_R9, r9);		\
+	COND_POP(set, CLBR_R8, r8);		\
+	COND_POP(set, CLBR_RDI, rdi);		\
+	COND_POP(set, CLBR_RSI, rsi);		\
+	COND_POP(set, CLBR_RDX, rdx);		\
+	COND_POP(set, CLBR_RCX, rcx);		\
+	COND_POP(set, CLBR_RAX, rax)
+
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
 #define PARA_INDIRECT(addr)	*addr(%rip)
 #else
-#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
-#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PV_SAVE_REGS(set)			\
+	COND_PUSH(set, CLBR_EAX, eax);		\
+	COND_PUSH(set, CLBR_EDI, edi);		\
+	COND_PUSH(set, CLBR_ECX, ecx);		\
+	COND_PUSH(set, CLBR_EDX, edx)
+#define PV_RESTORE_REGS(set)			\
+	COND_POP(set, CLBR_EDX, edx);		\
+	COND_POP(set, CLBR_ECX, ecx);		\
+	COND_POP(set, CLBR_EDI, edi);		\
+	COND_POP(set, CLBR_EAX, eax)
+
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
 #define PARA_INDIRECT(addr)	*%cs:addr
@@ -1566,15 +1592,15 @@
 
 #define DISABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  PV_SAVE_REGS;						\
+		  PV_SAVE_REGS(clobbers);				\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
-		  PV_RESTORE_REGS;)			\
+		  PV_RESTORE_REGS(clobbers);)
 
 #define ENABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  PV_SAVE_REGS;						\
+		  PV_SAVE_REGS(clobbers);				\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
-		  PV_RESTORE_REGS;)
+		  PV_RESTORE_REGS(clobbers);)
 
 #define USERGS_SYSRET32							\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
@@ -1604,11 +1630,15 @@
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
 		  swapgs)
 
+/*
+ * Note: swapgs is very special, and in practise is either going to be
+ * implemented with a single "swapgs" instruction or something very
+ * special.  Either way, we don't need to save any registers for
+ * it.
+ */
 #define SWAPGS								\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
-		  PV_SAVE_REGS;						\
-		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs);		\
-		  PV_RESTORE_REGS					\
+		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs)		\
 		 )
 
 #define GET_CR2_INTO_RCX				\

[PATCH 5 of 7] x86/paravirt: add register-saving thunks to reduce caller register pressure

[Jeremy Fitzhardinge]

One of the problems with inserting a pile of C calls where previously
there were none is that the register pressure is greatly increased.
The C calling convention says that the caller must expect a certain
set of registers may be trashed by the callee, and that the callee can
use those registers without restriction.  This includes the function
argument registers, and several others.

This patch seeks to alleviate this pressure by introducing wrapper
thunks that will do the register saving/restoring, so that the
callsite doesn't need to worry about it, but the callee function can
be conventional compiler-generated code.  In many cases (particularly
performance-sensitive cases) the callee will be in assembler anyway,
and need not use the compiler's calling convention.

Standard calling convention is:
	 arguments	    return	scratch
x86-32	 eax edx ecx	    eax		?
x86-64	 rdi rsi rdx rcx    rax		r8 r9 r10 r11

The thunk preserves all argument and scratch registers.  The return
register is not preserved, and is available as a scratch register for
unwrapped callee code (and of course the return value).

Wrapped function pointers are themselves wrapped in a struct
paravirt_callee_save structure, in order to get some warning from the
compiler when functions with mismatched calling conventions are used.

The most common paravirt ops, both statically and dynamically, are
interrupt enable/disable/save/restore, so handle them first.  This is
particularly easy since their calls are handled specially anyway.

XXX Deal with VMI.  What's their calling convention?

---
 arch/x86/include/asm/paravirt.h |  126 ++++++++++++++++++++++++++++++---------
 arch/x86/kernel/paravirt.c      |    8 +-
 arch/x86/kernel/vsmp_64.c       |   12 ++-
 arch/x86/lguest/boot.c          |   13 ++--
 arch/x86/xen/enlighten.c        |    8 +-
 arch/x86/xen/irq.c              |   14 +++-
 6 files changed, 132 insertions(+), 49 deletions(-)

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -17,6 +17,10 @@
 #ifdef CONFIG_X86_32
 /* CLBR_ANY should match all regs platform has. For i386, that's just it */
 #define CLBR_ANY  ((1 << 4) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
+#define CLBR_RET_REG	(CLBR_EAX)
+#define CLBR_SCRATCH	(0)
 #else
 #define CLBR_RAX  CLBR_EAX
 #define CLBR_RCX  CLBR_ECX
@@ -27,16 +31,19 @@
 #define CLBR_R9   (1 << 6)
 #define CLBR_R10  (1 << 7)
 #define CLBR_R11  (1 << 8)
+
 #define CLBR_ANY  ((1 << 9) - 1)
 
 #define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
 			 CLBR_RCX | CLBR_R8 | CLBR_R9)
-#define CLBR_RET_REG	(CLBR_RAX | CLBR_RDX)
+#define CLBR_RET_REG	(CLBR_RAX)
 #define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
 
 #include <asm/desc_defs.h>
 #endif /* X86_64 */
 
+#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/cpumask.h>
@@ -50,6 +57,14 @@
 struct mm_struct;
 struct desc_struct;
 
+/*
+ * Wrapper type for pointers to code which uses the non-standard
+ * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
+ */
+struct paravirt_callee_save {
+	void *func;
+};
+
 /* general info */
 struct pv_info {
 	unsigned int kernel_rpl;
@@ -199,11 +214,15 @@
 	 * expected to use X86_EFLAGS_IF; all other bits
 	 * returned from save_fl are undefined, and may be ignored by
 	 * restore_fl.
+	 *
+	 * NOTE: These functions callers expect the callee to preserve
+	 * more registers than the standard C calling convention.
 	 */
-	unsigned long (*save_fl)(void);
-	void (*restore_fl)(unsigned long);
-	void (*irq_disable)(void);
-	void (*irq_enable)(void);
+	struct paravirt_callee_save save_fl;
+	struct paravirt_callee_save restore_fl;
+	struct paravirt_callee_save irq_disable;
+	struct paravirt_callee_save irq_enable;
+
 	void (*safe_halt)(void);
 	void (*halt)(void);
 
@@ -1435,12 +1454,37 @@
 	__parainstructions_end[];
 
 #ifdef CONFIG_X86_32
-#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
-#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
+#define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
+#define PV_RESTORE_REGS "popl %edx; popl %ecx;"
+
+/* save and restore all caller-save registers, except return value */
+#define PV_SAVE_ALL_CALLER_REGS PV_SAVE_REGS
+#define PV_RESTORE_ALL_CALLER_REGS PV_RESTORE_REGS
+
 #define PV_FLAGS_ARG "0"
 #define PV_EXTRA_CLOBBERS
 #define PV_VEXTRA_CLOBBERS
 #else
+/* save and restore all caller-save registers, except return value */
+#define PV_SAVE_ALL_CALLER_REGS						\
+	"push %rcx;"							\
+	"push %rdx;"							\
+	"push %rsi;"							\
+	"push %rdi;"							\
+	"push %r8;"							\
+	"push %r9;"							\
+	"push %r10;"							\
+	"push %r11;"
+#define PV_RESTORE_ALL_CALLER_REGS					\
+	"pop %r11;"							\
+	"pop %r10;"							\
+	"pop %r9;"							\
+	"pop %r8;"							\
+	"pop %rdi;"							\
+	"pop %rsi;"							\
+	"pop %rdx;"							\
+	"pop %rcx;"
+
 /* We save some registers, but all of them, that's too much. We clobber all
  * caller saved registers but the argument parameter */
 #define PV_SAVE_REGS "pushq %%rdi;"
@@ -1450,52 +1494,76 @@
 #define PV_FLAGS_ARG "D"
 #endif
 
+/*
+ * Generate a thunk around a function which saves all caller-save
+ * registers except for the return value.  This allows C functions to
+ * be called from assembler code where fewer than normal registers are
+ * available.  It may also help code generation around calls from C
+ * code if the common case doesn't use many registers.
+ *
+ * When a callee is wrapped in a thunk, the caller can assume that all
+ * arg regs and all scratch registers are preserved across the
+ * call. The return value in rax/eax will not be saved, even for void
+ * functions.
+ */
+#define PV_CALLEE_SAVE_REGS_THUNK(func)					\
+	extern typeof(func) __raw_callee_save_##func;			\
+	static void *__##func##__ __used = func;			\
+									\
+	asm(".pushsection .text;"					\
+	    "__raw_callee_save_" #func ": "				\
+	    PV_SAVE_ALL_CALLER_REGS					\
+	    "call " #func ";"						\
+	    PV_RESTORE_ALL_CALLER_REGS					\
+	    "ret;"							\
+	    ".popsection")
+
+/* Get a reference to a callee-save function */
+#define PV_CALLEE_SAVE(func)						\
+	((struct paravirt_callee_save) { __raw_callee_save_##func })
+
+/* Promise that "func" already uses the right calling convention */
+#define __PV_IS_CALLEE_SAVE(func)			\
+	((struct paravirt_callee_save) { func })
+
 static inline unsigned long __raw_local_save_flags(void)
 {
 	unsigned long f;
 
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     : "=a"(f)
 		     : paravirt_type(pv_irq_ops.save_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
+		     : "memory", "cc");
 	return f;
 }
 
 static inline void raw_local_irq_restore(unsigned long f)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     : "=a"(f)
 		     : PV_FLAGS_ARG(f),
 		       paravirt_type(pv_irq_ops.restore_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "cc");
 }
 
 static inline void raw_local_irq_disable(void)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_disable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "eax", "cc");
 }
 
 static inline void raw_local_irq_enable(void)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_enable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "eax", "cc");
 }
 
 static inline unsigned long __raw_local_irq_save(void)
@@ -1539,9 +1607,9 @@
 
 
 #define COND_PUSH(set, mask, reg)			\
-	.if ((~set) & mask); push %reg; .endif
+	.if ((~(set)) & mask); push %reg; .endif
 #define COND_POP(set, mask, reg)			\
-	.if ((~set) & mask); pop %reg; .endif
+	.if ((~(set)) & mask); pop %reg; .endif
 
 #ifdef CONFIG_X86_64
 
@@ -1592,15 +1660,15 @@
 
 #define DISABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  PV_SAVE_REGS(clobbers);				\
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);		\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
-		  PV_RESTORE_REGS(clobbers);)
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
 #define ENABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  PV_SAVE_REGS(clobbers);				\
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);		\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
-		  PV_RESTORE_REGS(clobbers);)
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
 #define USERGS_SYSRET32							\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -310,10 +310,10 @@
 
 struct pv_irq_ops pv_irq_ops = {
 	.init_IRQ = native_init_IRQ,
-	.save_fl = native_save_fl,
-	.restore_fl = native_restore_fl,
-	.irq_disable = native_irq_disable,
-	.irq_enable = native_irq_enable,
+	.save_fl = __PV_IS_CALLEE_SAVE(native_save_fl),
+	.restore_fl = __PV_IS_CALLEE_SAVE(native_restore_fl),
+	.irq_disable = __PV_IS_CALLEE_SAVE(native_irq_disable),
+	.irq_enable = __PV_IS_CALLEE_SAVE(native_irq_enable),
 	.safe_halt = native_safe_halt,
 	.halt = native_halt,
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -37,6 +37,7 @@
 		flags &= ~X86_EFLAGS_IF;
 	return flags;
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_save_fl);
 
 static void vsmp_restore_fl(unsigned long flags)
 {
@@ -46,6 +47,7 @@
 		flags |= X86_EFLAGS_AC;
 	native_restore_fl(flags);
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_restore_fl);
 
 static void vsmp_irq_disable(void)
 {
@@ -53,6 +55,7 @@
 
 	native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_disable);
 
 static void vsmp_irq_enable(void)
 {
@@ -60,6 +63,7 @@
 
 	native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_enable);
 
 static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
 				  unsigned long addr, unsigned len)
@@ -90,10 +94,10 @@
 	       cap, ctl);
 	if (cap & ctl & (1 << 4)) {
 		/* Setup irq ops and turn on vSMP  IRQ fastpath handling */
-		pv_irq_ops.irq_disable = vsmp_irq_disable;
-		pv_irq_ops.irq_enable  = vsmp_irq_enable;
-		pv_irq_ops.save_fl  = vsmp_save_fl;
-		pv_irq_ops.restore_fl  = vsmp_restore_fl;
+		pv_irq_ops.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable);
+		pv_irq_ops.irq_enable  = PV_CALLEE_SAVE(vsmp_irq_enable);
+		pv_irq_ops.save_fl  = PV_CALLEE_SAVE(vsmp_save_fl);
+		pv_irq_ops.restore_fl  = PV_CALLEE_SAVE(vsmp_restore_fl);
 		pv_init_ops.patch = vsmp_patch;
 
 		ctl &= ~(1 << 4);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -173,24 +173,29 @@
 {
 	return lguest_data.irq_enabled;
 }
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 
 /* restore_flags() just sets the flags back to the value given. */
 static void restore_fl(unsigned long flags)
 {
 	lguest_data.irq_enabled = flags;
 }
+PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
 
 /* Interrupts go off... */
 static void irq_disable(void)
 {
 	lguest_data.irq_enabled = 0;
 }
+PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 
 /* Interrupts go on... */
 static void irq_enable(void)
 {
 	lguest_data.irq_enabled = X86_EFLAGS_IF;
 }
+PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
+
 /*:*/
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
@@ -984,10 +989,10 @@
 
 	/* interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
-	pv_irq_ops.save_fl = save_fl;
-	pv_irq_ops.restore_fl = restore_fl;
-	pv_irq_ops.irq_disable = irq_disable;
-	pv_irq_ops.irq_enable = irq_enable;
+	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
+	pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+	pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
+	pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
 	/* init-time operations */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -676,10 +676,10 @@
 	if (have_vcpu_info_placement) {
 		printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
-		pv_irq_ops.save_fl = xen_save_fl_direct;
-		pv_irq_ops.restore_fl = xen_restore_fl_direct;
-		pv_irq_ops.irq_disable = xen_irq_disable_direct;
-		pv_irq_ops.irq_enable = xen_irq_enable_direct;
+		pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct);
+		pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(xen_restore_fl_direct);
+		pv_irq_ops.irq_disable = __PV_IS_CALLEE_SAVE(xen_irq_disable_direct);
+		pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(xen_irq_enable_direct);
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
 	}
 }
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -50,6 +50,7 @@
 	*/
 	return (-flags) & X86_EFLAGS_IF;
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_save_fl);
 
 static void xen_restore_fl(unsigned long flags)
 {
@@ -76,6 +77,7 @@
 			xen_force_evtchn_callback();
 	}
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_restore_fl);
 
 static void xen_irq_disable(void)
 {
@@ -86,6 +88,7 @@
 	percpu_read(xen_vcpu)->evtchn_upcall_mask = 1;
 	preempt_enable_no_resched();
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_irq_disable);
 
 static void xen_irq_enable(void)
 {
@@ -106,6 +109,7 @@
 	if (unlikely(vcpu->evtchn_upcall_pending))
 		xen_force_evtchn_callback();
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_irq_enable);
 
 static void xen_safe_halt(void)
 {
@@ -124,10 +128,12 @@
 
 static const struct pv_irq_ops xen_irq_ops __initdata = {
 	.init_IRQ = __xen_init_IRQ,
-	.save_fl = xen_save_fl,
-	.restore_fl = xen_restore_fl,
-	.irq_disable = xen_irq_disable,
-	.irq_enable = xen_irq_enable,
+
+	.save_fl = PV_CALLEE_SAVE(xen_save_fl),
+	.restore_fl = PV_CALLEE_SAVE(xen_restore_fl),
+	.irq_disable = PV_CALLEE_SAVE(xen_irq_disable),
+	.irq_enable = PV_CALLEE_SAVE(xen_irq_enable),
+
 	.safe_halt = xen_safe_halt,
 	.halt = xen_halt,
 #ifdef CONFIG_X86_64

[PATCH 6 of 7] x86/paravirt: implement PVOP_CALL macros for callee-save functions

[Jeremy Fitzhardinge]

Functions with the callee save calling convention clobber many fewer
registers than the normal C calling convention.  Implement variants of
PVOP_V?CALL* accordingly.  This only bothers with functions up to 3
args, since functions with more args may as well use the normal
calling convention.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h |  134 ++++++++++++++++++++++++++++-----------
 1 file changed, 99 insertions(+), 35 deletions(-)

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -510,25 +510,45 @@
  * makes sure the incoming and outgoing types are always correct.
  */
 #ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
+#define PVOP_VCALL_ARGS				\
+	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
 #define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+
+#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
+
 #define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
 					"=c" (__ecx)
 #define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+
+#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
+
 #define EXTRA_CLOBBERS
 #define VEXTRA_CLOBBERS
-#else
-#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
+#else  /* CONFIG_X86_64 */
+#define PVOP_VCALL_ARGS					\
+	unsigned long __edi = __edi, __esi = __esi,	\
+		__edx = __edx, __ecx = __ecx
 #define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+
+#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
+
 #define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
 				"=S" (__esi), "=d" (__edx),		\
 				"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
 
-#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
+#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
 
 #define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
 #define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif
+#endif	/* CONFIG_X86_32 */
 
 #ifdef CONFIG_PARAVIRT_DEBUG
 #define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
@@ -536,10 +556,11 @@
 #define PVOP_TEST_NULL(op)	((void)op)
 #endif
 
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
+		      pre, post, ...)					\
 	({								\
 		rettype __ret;						\
-		PVOP_CALL_ARGS;					\
+		PVOP_CALL_ARGS;						\
 		PVOP_TEST_NULL(op);					\
 		/* This is 32-bit specific, but is okay in 64-bit */	\
 		/* since this condition will never hold */		\
@@ -547,70 +568,113 @@
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : PVOP_CALL_CLOBBERS		\
+				     : call_clbr			\
 				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
+				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
+				     : "memory", "cc" extra_clbr);	\
 			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
 		} else {						\
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : PVOP_CALL_CLOBBERS		\
+				     : call_clbr			\
 				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
+				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
+				     : "memory", "cc" extra_clbr);	\
 			__ret = (rettype)__eax;				\
 		}							\
 		__ret;							\
 	})
-#define __PVOP_VCALL(op, pre, post, ...)				\
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
+		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
+
+#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_CALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
 	({								\
 		PVOP_VCALL_ARGS;					\
 		PVOP_TEST_NULL(op);					\
 		asm volatile(pre					\
 			     paravirt_alt(PARAVIRT_CALL)		\
 			     post					\
-			     : PVOP_VCALL_CLOBBERS			\
+			     : call_clbr				\
 			     : paravirt_type(op),			\
-			       paravirt_clobber(CLBR_ANY),		\
+			       paravirt_clobber(clbr),			\
 			       ##__VA_ARGS__				\
-			     : "memory", "cc" VEXTRA_CLOBBERS);		\
+			     : "memory", "cc" extra_clbr);		\
 	})
 
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
+		       VEXTRA_CLOBBERS,					\
+		       pre, post, ##__VA_ARGS__)
+
+#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_VCALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+
 #define PVOP_CALL0(rettype, op)						\
 	__PVOP_CALL(rettype, op, "", "")
 #define PVOP_VCALL0(op)							\
 	__PVOP_VCALL(op, "", "")
 
+#define PVOP_CALLEE0(rettype, op)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "")
+#define PVOP_VCALLEE0(op)						\
+	__PVOP_VCALLEESAVE(op, "", "")
+
+
 #define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
 #define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
+
+#define PVOP_CALLEE1(rettype, op, arg1)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALLEE1(op, arg1)						\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
+
 
 #define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
-	"1" ((unsigned long)(arg2)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2))
 #define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
-	"1" ((unsigned long)(arg2)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2))
+
+#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
+			  PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALLEE2(op, arg1, arg2)					\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
+			   PVOP_CALL_ARG2(arg2))
+
 
 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
 #define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
 
 /* This is the only difference in x86_64. We can make it much simpler */
 #ifdef CONFIG_X86_32
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
 	__PVOP_CALL(rettype, op,					\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
 	__PVOP_VCALL(op,						\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
@@ -618,13 +682,13 @@
 		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
 #else
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
+	__PVOP_CALL(rettype, op, "", "",				\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
+	__PVOP_VCALL(op, "", "",					\
+		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
+		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 #endif
 
 static inline int paravirt_enabled(void)

[PATCH 7 of 7] x86/paravirt: use callee-saved convention for pte_val/make_pte/etc

[Jeremy Fitzhardinge]

In the native case, pte_val, make_pte, etc are all just identity
functions, so there's no need to clobber a lot of registers over them.

(This changes the 32-bit callee-save calling convention to return both
EAX and EDX so functions can return 64-bit values.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h |   78 +++++++++++++++++++--------------------
 arch/x86/kernel/paravirt.c      |   53 ++++++--------------------
 arch/x86/xen/mmu.c              |   24 ++++++++----
 3 files changed, 67 insertions(+), 88 deletions(-)

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -19,7 +19,7 @@
 #define CLBR_ANY  ((1 << 4) - 1)
 
 #define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
-#define CLBR_RET_REG	(CLBR_EAX)
+#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
 #define CLBR_SCRATCH	(0)
 #else
 #define CLBR_RAX  CLBR_EAX
@@ -308,11 +308,11 @@
 	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
 					pte_t *ptep, pte_t pte);
 
-	pteval_t (*pte_val)(pte_t);
-	pte_t (*make_pte)(pteval_t pte);
+	struct paravirt_callee_save pte_val;
+	struct paravirt_callee_save make_pte;
 
-	pgdval_t (*pgd_val)(pgd_t);
-	pgd_t (*make_pgd)(pgdval_t pgd);
+	struct paravirt_callee_save pgd_val;
+	struct paravirt_callee_save make_pgd;
 
 #if PAGETABLE_LEVELS >= 3
 #ifdef CONFIG_X86_PAE
@@ -327,12 +327,12 @@
 
 	void (*set_pud)(pud_t *pudp, pud_t pudval);
 
-	pmdval_t (*pmd_val)(pmd_t);
-	pmd_t (*make_pmd)(pmdval_t pmd);
+	struct paravirt_callee_save pmd_val;
+	struct paravirt_callee_save make_pmd;
 
 #if PAGETABLE_LEVELS == 4
-	pudval_t (*pud_val)(pud_t);
-	pud_t (*make_pud)(pudval_t pud);
+	struct paravirt_callee_save pud_val;
+	struct paravirt_callee_save make_pud;
 
 	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
 #endif	/* PAGETABLE_LEVELS == 4 */
@@ -1155,13 +1155,13 @@
 	pteval_t ret;
 
 	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pteval_t,
+				   pv_mmu_ops.make_pte,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val);
+		ret = PVOP_CALLEE1(pteval_t,
+				   pv_mmu_ops.make_pte,
+				   val);
 
 	return (pte_t) { .pte = ret };
 }
@@ -1171,11 +1171,11 @@
 	pteval_t ret;
 
 	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte, (u64)pte.pte >> 32);
+		ret = PVOP_CALLEE2(pteval_t, pv_mmu_ops.pte_val,
+				   pte.pte, (u64)pte.pte >> 32);
 	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte);
+		ret = PVOP_CALLEE1(pteval_t, pv_mmu_ops.pte_val,
+				   pte.pte);
 
 	return ret;
 }
@@ -1185,11 +1185,11 @@
 	pgdval_t ret;
 
 	if (sizeof(pgdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pgdval_t, pv_mmu_ops.make_pgd,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pgdval_t, pv_mmu_ops.make_pgd,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pgdval_t, pv_mmu_ops.make_pgd,
-				 val);
+		ret = PVOP_CALLEE1(pgdval_t, pv_mmu_ops.make_pgd,
+				   val);
 
 	return (pgd_t) { ret };
 }
@@ -1199,11 +1199,11 @@
 	pgdval_t ret;
 
 	if (sizeof(pgdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd, (u64)pgd.pgd >> 32);
+		ret =  PVOP_CALLEE2(pgdval_t, pv_mmu_ops.pgd_val,
+				    pgd.pgd, (u64)pgd.pgd >> 32);
 	else
-		ret =  PVOP_CALL1(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd);
+		ret =  PVOP_CALLEE1(pgdval_t, pv_mmu_ops.pgd_val,
+				    pgd.pgd);
 
 	return ret;
 }
@@ -1267,11 +1267,11 @@
 	pmdval_t ret;
 
 	if (sizeof(pmdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pmdval_t, pv_mmu_ops.make_pmd,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pmdval_t, pv_mmu_ops.make_pmd,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pmdval_t, pv_mmu_ops.make_pmd,
-				 val);
+		ret = PVOP_CALLEE1(pmdval_t, pv_mmu_ops.make_pmd,
+				   val);
 
 	return (pmd_t) { ret };
 }
@@ -1281,11 +1281,11 @@
 	pmdval_t ret;
 
 	if (sizeof(pmdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd, (u64)pmd.pmd >> 32);
+		ret =  PVOP_CALLEE2(pmdval_t, pv_mmu_ops.pmd_val,
+				    pmd.pmd, (u64)pmd.pmd >> 32);
 	else
-		ret =  PVOP_CALL1(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd);
+		ret =  PVOP_CALLEE1(pmdval_t, pv_mmu_ops.pmd_val,
+				    pmd.pmd);
 
 	return ret;
 }
@@ -1307,11 +1307,11 @@
 	pudval_t ret;
 
 	if (sizeof(pudval_t) > sizeof(long))
-		ret = PVOP_CALL2(pudval_t, pv_mmu_ops.make_pud,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pudval_t, pv_mmu_ops.make_pud,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pudval_t, pv_mmu_ops.make_pud,
-				 val);
+		ret = PVOP_CALLEE1(pudval_t, pv_mmu_ops.make_pud,
+				   val);
 
 	return (pud_t) { ret };
 }
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -391,43 +391,12 @@
 #endif
 };
 
-typedef pte_t make_pte_t(pteval_t);
-typedef pmd_t make_pmd_t(pmdval_t);
-typedef pud_t make_pud_t(pudval_t);
-typedef pgd_t make_pgd_t(pgdval_t);
-
-typedef pteval_t pte_val_t(pte_t);
-typedef pmdval_t pmd_val_t(pmd_t);
-typedef pudval_t pud_val_t(pud_t);
-typedef pgdval_t pgd_val_t(pgd_t);
-
-
 #if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
 /* 32-bit pagetable entries */
-#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_32
-#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_32
-
-#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_32
-#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_32
-
-#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_32
-#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_32
-
-#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_32
-#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_32
+#define PTE_IDENT	__PV_IS_CALLEE_SAVE(_paravirt_ident_32)
 #else
 /* 64-bit pagetable entries */
-#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_64
-#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_64
-
-#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_64
-#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_64
-
-#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_64
-#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_64
-
-#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_64
-#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_64
+#define PTE_IDENT	__PV_IS_CALLEE_SAVE(_paravirt_ident_64)
 #endif
 
 struct pv_mmu_ops pv_mmu_ops = {
@@ -481,21 +450,23 @@
 	.pmd_clear = native_pmd_clear,
 #endif
 	.set_pud = native_set_pud,
-	.pmd_val = paravirt_native_pmd_val,
-	.make_pmd = paravirt_native_make_pmd,
+
+	.pmd_val = PTE_IDENT,
+	.make_pmd = PTE_IDENT,
 
 #if PAGETABLE_LEVELS == 4
-	.pud_val = paravirt_native_pud_val,
-	.make_pud = paravirt_native_make_pud,
+	.pud_val = PTE_IDENT,
+	.make_pud = PTE_IDENT,
+
 	.set_pgd = native_set_pgd,
 #endif
 #endif /* PAGETABLE_LEVELS >= 3 */
 
-	.pte_val = paravirt_native_pte_val,
-	.pgd_val = paravirt_native_pgd_val,
+	.pte_val = PTE_IDENT,
+	.pgd_val = PTE_IDENT,
 
-	.make_pte = paravirt_native_make_pte,
-	.make_pgd = paravirt_native_make_pgd,
+	.make_pte = PTE_IDENT,
+	.make_pgd = PTE_IDENT,
 
 	.dup_mmap = paravirt_nop,
 	.exit_mmap = paravirt_nop,
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -492,28 +492,33 @@
 {
 	return pte_mfn_to_pfn(pte.pte);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pte_val);
 
 pgdval_t xen_pgd_val(pgd_t pgd)
 {
 	return pte_mfn_to_pfn(pgd.pgd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pgd_val);
 
 pte_t xen_make_pte(pteval_t pte)
 {
 	pte = pte_pfn_to_mfn(pte);
 	return native_make_pte(pte);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte);
 
 pgd_t xen_make_pgd(pgdval_t pgd)
 {
 	pgd = pte_pfn_to_mfn(pgd);
 	return native_make_pgd(pgd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pgd);
 
 pmdval_t xen_pmd_val(pmd_t pmd)
 {
 	return pte_mfn_to_pfn(pmd.pmd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pmd_val);
 
 void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 {
@@ -590,12 +595,14 @@
 	pmd = pte_pfn_to_mfn(pmd);
 	return native_make_pmd(pmd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pmd);
 
 #if PAGETABLE_LEVELS == 4
 pudval_t xen_pud_val(pud_t pud)
 {
 	return pte_mfn_to_pfn(pud.pud);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pud_val);
 
 pud_t xen_make_pud(pudval_t pud)
 {
@@ -603,6 +610,7 @@
 
 	return native_make_pud(pud);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pud);
 
 pgd_t *xen_get_user_pgd(pgd_t *pgd)
 {
@@ -1813,11 +1821,11 @@
 	.ptep_modify_prot_start = __ptep_modify_prot_start,
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
-	.pte_val = xen_pte_val,
-	.pgd_val = xen_pgd_val,
+	.pte_val = PV_CALLEE_SAVE(xen_pte_val),
+	.pgd_val = PV_CALLEE_SAVE(xen_pgd_val),
 
-	.make_pte = xen_make_pte,
-	.make_pgd = xen_make_pgd,
+	.make_pte = PV_CALLEE_SAVE(xen_make_pte),
+	.make_pgd = PV_CALLEE_SAVE(xen_make_pgd),
 
 #ifdef CONFIG_X86_PAE
 	.set_pte_atomic = xen_set_pte_atomic,
@@ -1827,12 +1835,12 @@
 #endif	/* CONFIG_X86_PAE */
 	.set_pud = xen_set_pud_hyper,
 
-	.make_pmd = xen_make_pmd,
-	.pmd_val = xen_pmd_val,
+	.make_pmd = PV_CALLEE_SAVE(xen_make_pmd),
+	.pmd_val = PV_CALLEE_SAVE(xen_pmd_val),
 
 #if PAGETABLE_LEVELS == 4
-	.pud_val = xen_pud_val,
-	.make_pud = xen_make_pud,
+	.pud_val = PV_CALLEE_SAVE(xen_pud_val),
+	.make_pud = PV_CALLEE_SAVE(xen_make_pud),
 	.set_pgd = xen_set_pgd_hyper,
 
 	.alloc_pud = xen_alloc_pte_init,

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[H. Peter Anvin]

Hi Jeremy,

First of all, thanks for tackling this issue.

I tried applying this patchset to tip:x86/paravirt, but I got the
following build error when applied on top of tip:x86/core:

/home/hpa/kernel/linux-2.6-tip.paravirt/arch/x86/include/asm/paravirt.h:
In function ‘pud_val’:
/home/hpa/kernel/linux-2.6-tip.paravirt/arch/x86/include/asm/paravirt.h:1324:
error: invalid operands to binary == (have ‘struct paravirt_callee_save’
and ‘void *’)


The failing configuration was x86-64 "make allyesconfig".

	-hpa

Re: [PATCH 2 of 7] x86/pvops: add a paravirt_ident functions to allow special patching

[Rusty Russell]

On Thursday 29 January 2009 09:05:02 Jeremy Fitzhardinge wrote:
>  void _paravirt_nop(void);
> +u32 _paravirt_ident_32(u32);
> +u64 _paravirt_ident_64(u64);
> +
>  #define paravirt_nop	((void *)_paravirt_nop)

So, we used a void * cast for the paravirt_nop case, but you decided to use explicit types for the ident cases?

>  	if (opfunc == NULL)
>  		/* If there's no function, patch it with a ud2a (BUG) */
>  		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
> -	else if (opfunc == paravirt_nop)
> +	else if (opfunc == _paravirt_nop)
>  		/* If the operation is a nop, then nop the callsite */
>  		ret = paravirt_patch_nop();

Gratuitous change?

> +typedef pte_t make_pte_t(pteval_t);
> +typedef pmd_t make_pmd_t(pmdval_t);
> +typedef pud_t make_pud_t(pudval_t);
> +typedef pgd_t make_pgd_t(pgdval_t);
> +
> +typedef pteval_t pte_val_t(pte_t);
> +typedef pmdval_t pmd_val_t(pmd_t);
> +typedef pudval_t pud_val_t(pud_t);
> +typedef pgdval_t pgd_val_t(pgd_t);
> +
> +
> +#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
> +/* 32-bit pagetable entries */
> +#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_32
> +#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_32
> +
> +#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_32
> +#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_32
> +
> +#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_32
> +#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_32
> +
> +#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_32
> +#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_32
> +#else
> +/* 64-bit pagetable entries */
> +#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_64
> +#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_64
> +
> +#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_64
> +#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_64
> +
> +#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_64
> +#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_64
> +
> +#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_64
> +#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_64
> +#endif

I think I prefer:

/* make_pte etc and pgd_val etc are identity functions. */
#define paravirt_native_page_op \
	(sizeof(pte_t) == sizeof(u64) ? paravirt_ident_64 : paravirt_ident_32)

Then use that everywhere rather than these defines?

But it's a minor point; the code seems perfectly sound.

Acked-by: Rusty Russell <rusty@rustcorp.com.au>

Thanks!
Rusty.

Re: [PATCH 3 of 7] x86: fix paravirt clobber in entry_64.S

[Rusty Russell]

On Thursday 29 January 2009 09:05:03 Jeremy Fitzhardinge wrote:
> The clobber is trying to say that anything except RDI is available for
> clobbering, but actually clobbers everything.  This hasn't mattered
> because the clobbers were basically ignored, but subsequent patches
> will rely on them.
> 
> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Acked-by: Rusty Russell <rusty@rustcorp.com.au>

Hmm, did we never have the deliberate-clobbering debug code for 64 bit?

Thanks,
Rusty.

Re: [PATCH 4 of 7] x86/paravirt: selectively save/restore regs around pvops calls

[Rusty Russell]

On Thursday 29 January 2009 09:05:04 Jeremy Fitzhardinge wrote:
> +#define PV_SAVE_REGS(set)			\
> +	COND_PUSH(set, CLBR_RAX, rax);		\
> +	COND_PUSH(set, CLBR_RCX, rcx);		\
> +	COND_PUSH(set, CLBR_RDX, rdx);		\
> +	COND_PUSH(set, CLBR_RSI, rsi);		\
> +	COND_PUSH(set, CLBR_RDI, rdi);		\
> +	COND_PUSH(set, CLBR_R8, r8);		\
> +	COND_PUSH(set, CLBR_R9, r9);		\
> +	COND_PUSH(set, CLBR_R10, r10);		\
> +	COND_PUSH(set, CLBR_R11, r11)

It's kind of messy.  Can we do something clever here with token pasting?

Cheers,
Rusty.

Re: [PATCH 2 of 7] x86/pvops: add a paravirt_ident functions to allow special patching

[Jeremy Fitzhardinge]

Rusty Russell wrote:
> On Thursday 29 January 2009 09:05:02 Jeremy Fitzhardinge wrote:
>   
>>  void _paravirt_nop(void);
>> +u32 _paravirt_ident_32(u32);
>> +u64 _paravirt_ident_64(u64);
>> +
>>  #define paravirt_nop	((void *)_paravirt_nop)
>>     
>
> So, we used a void * cast for the paravirt_nop case, but you decided to use explicit types for the ident cases?
>   

Yes.  Partly because any nop function is going to be basically 
equivalent to (void (*)(void)), but the concrete types for the ident 
function will vary (pointer, scalar, structure, etc).

>>  	if (opfunc == NULL)
>>  		/* If there's no function, patch it with a ud2a (BUG) */
>>  		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
>> -	else if (opfunc == paravirt_nop)
>> +	else if (opfunc == _paravirt_nop)
>>  		/* If the operation is a nop, then nop the callsite */
>>  		ret = paravirt_patch_nop();
>>     
>
> Gratuitous change?
>   

To make it consistent with the newly added lines following.  And its 
slightly more correct.

>   
>> +typedef pte_t make_pte_t(pteval_t);
>> +typedef pmd_t make_pmd_t(pmdval_t);
>> +typedef pud_t make_pud_t(pudval_t);
>> +typedef pgd_t make_pgd_t(pgdval_t);
>> +
>> +typedef pteval_t pte_val_t(pte_t);
>> +typedef pmdval_t pmd_val_t(pmd_t);
>> +typedef pudval_t pud_val_t(pud_t);
>> +typedef pgdval_t pgd_val_t(pgd_t);
>> +
>> +
>> +#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
>> +/* 32-bit pagetable entries */
>> +#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_32
>> +#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_32
>> +
>> +#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_32
>> +#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_32
>> +
>> +#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_32
>> +#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_32
>> +
>> +#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_32
>> +#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_32
>> +#else
>> +/* 64-bit pagetable entries */
>> +#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_64
>> +#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_64
>> +
>> +#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_64
>> +#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_64
>> +
>> +#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_64
>> +#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_64
>> +
>> +#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_64
>> +#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_64
>> +#endif
>>     
>
> I think I prefer:
>
> /* make_pte etc and pgd_val etc are identity functions. */
> #define paravirt_native_page_op \
> 	(sizeof(pte_t) == sizeof(u64) ? paravirt_ident_64 : paravirt_ident_32)
>
> Then use that everywhere rather than these defines?
>   

They disappear later in the series anyway.

> But it's a minor point; the code seems perfectly sound.
>   

Great, thanks for reviewing.

    J

Re: [PATCH 3 of 7] x86: fix paravirt clobber in entry_64.S

[Jeremy Fitzhardinge]

Rusty Russell wrote:
> On Thursday 29 January 2009 09:05:03 Jeremy Fitzhardinge wrote:
>   
>> The clobber is trying to say that anything except RDI is available for
>> clobbering, but actually clobbers everything.  This hasn't mattered
>> because the clobbers were basically ignored, but subsequent patches
>> will rely on them.
>>
>> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
>>     
>
> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
>
> Hmm, did we never have the deliberate-clobbering debug code for 64 bit?
>   

No.  I think I killed it off before 64-bit was even started.  There was 
some confusion about whether the return regs were considered to be 
"clobbered" or not, but I don't remember the details.

    J

Re: [PATCH 4 of 7] x86/paravirt: selectively save/restore regs around pvops calls

[Jeremy Fitzhardinge]

Rusty Russell wrote:
> On Thursday 29 January 2009 09:05:04 Jeremy Fitzhardinge wrote:
>   
>> +#define PV_SAVE_REGS(set)			\
>> +	COND_PUSH(set, CLBR_RAX, rax);		\
>> +	COND_PUSH(set, CLBR_RCX, rcx);		\
>> +	COND_PUSH(set, CLBR_RDX, rdx);		\
>> +	COND_PUSH(set, CLBR_RSI, rsi);		\
>> +	COND_PUSH(set, CLBR_RDI, rdi);		\
>> +	COND_PUSH(set, CLBR_R8, r8);		\
>> +	COND_PUSH(set, CLBR_R9, r9);		\
>> +	COND_PUSH(set, CLBR_R10, r10);		\
>> +	COND_PUSH(set, CLBR_R11, r11)
>>     
>
> It's kind of messy.  Can we do something clever here with token pasting?
>   

I tried a few things, but no.  Passing in just RAX, and then pasting 
CLBR_##reg works, and the assembler accepts %RAX - but - the asm code 
also #defines RAX <some stack offset>, so the assembler ends up seeing 
%48.  I considered renaming all the CLBR_ defines to CLBR_rax, but that 
looks unhappy too.  So I stayed with this.

    J

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Jeremy Fitzhardinge]

H. Peter Anvin wrote:
> The failing configuration was x86-64 "make allyesconfig".
>
> 	-hpa
>   
Subject: x86/paravirt: fix missing callee-save call on pud_val

Fix missed convertion to using callee-saved calls for pud_val, which
causes a compile error when CONFIG_PARAVIRT_DEBUG is enabled.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
diff -r 452b0aa6f629 arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h	Wed Jan 28 14:18:52 2009 -0800
+++ b/arch/x86/include/asm/paravirt.h	Thu Jan 29 01:49:37 2009 -0800
@@ -1321,11 +1321,11 @@
 	pudval_t ret;
 
 	if (sizeof(pudval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud, (u64)pud.pud >> 32);
+		ret =  PVOP_CALLEE2(pudval_t, pv_mmu_ops.pud_val,
+				    pud.pud, (u64)pud.pud >> 32);
 	else
-		ret =  PVOP_CALL1(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud);
+		ret =  PVOP_CALLEE1(pudval_t, pv_mmu_ops.pud_val,
+				    pud.pud);
 
 	return ret;
 }

Re: [PATCH 2 of 7] x86/pvops: add a paravirt_ident functions to allow special patching

[Jeremy Fitzhardinge]

Rusty Russell wrote:
> I think I prefer:
>
> /* make_pte etc and pgd_val etc are identity functions. */
> #define paravirt_native_page_op \
> 	(sizeof(pte_t) == sizeof(u64) ? paravirt_ident_64 : paravirt_ident_32)
>
> Then use that everywhere rather than these defines?
>   

Hm, also I don't think that will work because paravirt_ident_32|64 
return different types.  The compiler might promote paravirt_ident_32 to 
returning a 64-bit number, which would be a bit disastrous. 

    J

Re: [PATCH 4 of 7] x86/paravirt: selectively save/restore regs around pvops calls

[Rusty Russell]

On Thursday 29 January 2009 20:00:34 Jeremy Fitzhardinge wrote:
> Rusty Russell wrote:
> > It's kind of messy.  Can we do something clever here with token pasting?
> 
> I tried a few things, but no.  Passing in just RAX, and then pasting 
> CLBR_##reg works, and the assembler accepts %RAX - but - the asm code 
> also #defines RAX <some stack offset>, so the assembler ends up seeing 
> %48.  I considered renaming all the CLBR_ defines to CLBR_rax, but that 
> looks unhappy too.  So I stayed with this.

OK, then Acked-by: Rusty Russell <rusty@rustcorp.com.au> on this one too.

Thanks,
Rusty.

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[H. Peter Anvin]

Jeremy Fitzhardinge wrote:
> H. Peter Anvin wrote:
>> The failing configuration was x86-64 "make allyesconfig".
>>
>>     -hpa
>>   
> Subject: x86/paravirt: fix missing callee-save call on pud_val
> 
> Fix missed convertion to using callee-saved calls for pud_val, which
> causes a compile error when CONFIG_PARAVIRT_DEBUG is enabled.
> 

Series applied to tip:x86/paravirt; it should make its way into
tip:master and linux-next over the next day or two, unless there are
failures.

	-hpa

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Jeremy Fitzhardinge]

H. Peter Anvin wrote:
> Jeremy Fitzhardinge wrote:
>   
>> H. Peter Anvin wrote:
>>     
>>> The failing configuration was x86-64 "make allyesconfig".
>>>
>>>     -hpa
>>>   
>>>       
>> Subject: x86/paravirt: fix missing callee-save call on pud_val
>>
>> Fix missed convertion to using callee-saved calls for pud_val, which
>> causes a compile error when CONFIG_PARAVIRT_DEBUG is enabled.
>>
>>     
>
> Series applied to tip:x86/paravirt; it should make its way into
> tip:master and linux-next over the next day or two, unless there are
> failures.

Thanks.  I have a couple of additional fixes.  Also, did you pick up 
those other two io.h patches I mailed you the other day?

    J

[PATCH 1/2] x86/paravirt: don't restore second return reg

[Jeremy Fitzhardinge]

Impact: bugfix

In the 32-bit calling convention, %eax:%edx is used to return 64-bit
values.  Don't save and restore %edx around wrapped functions, or they
can't return a full 64-bit result.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

===================================================================
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1522,8 +1522,8 @@
 #define PV_RESTORE_REGS "popl %edx; popl %ecx;"
 
 /* save and restore all caller-save registers, except return value */
-#define PV_SAVE_ALL_CALLER_REGS PV_SAVE_REGS
-#define PV_RESTORE_ALL_CALLER_REGS PV_RESTORE_REGS
+#define PV_SAVE_ALL_CALLER_REGS		"pushl %ecx;"
+#define PV_RESTORE_ALL_CALLER_REGS	"popl  %ecx;"
 
 #define PV_FLAGS_ARG "0"
 #define PV_EXTRA_CLOBBERS

[PATCH 2/2] x86/vmi: fix interrupt enable/disable/save/restore calling convention.

[Jeremy Fitzhardinge]

Zach says:
> Enable/Disable have no clobbers at all.
> Save clobbers only return value, %eax
> Restore also clobbers nothing.

This is precisely compatible with the calling convention, so we can
just call them directly without wrapping.

(Compile tested only.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/vmi_32.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

===================================================================
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -670,10 +670,11 @@
 	para_fill(pv_mmu_ops.write_cr2, SetCR2);
 	para_fill(pv_mmu_ops.write_cr3, SetCR3);
 	para_fill(pv_cpu_ops.write_cr4, SetCR4);
-	para_fill(pv_irq_ops.save_fl, GetInterruptMask);
-	para_fill(pv_irq_ops.restore_fl, SetInterruptMask);
-	para_fill(pv_irq_ops.irq_disable, DisableInterrupts);
-	para_fill(pv_irq_ops.irq_enable, EnableInterrupts);
+
+	para_fill(pv_irq_ops.save_fl.func, GetInterruptMask);
+	para_fill(pv_irq_ops.restore_fl.func, SetInterruptMask);
+	para_fill(pv_irq_ops.irq_disable.func, DisableInterrupts);
+	para_fill(pv_irq_ops.irq_enable.func, EnableInterrupts);
 
 	para_fill(pv_cpu_ops.wbinvd, WBINVD);
 	para_fill(pv_cpu_ops.read_tsc, RDTSC);

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Ingo Molnar]

* H. Peter Anvin <hpa@kernel.org> wrote:

> Jeremy Fitzhardinge wrote:
> > H. Peter Anvin wrote:
> >> The failing configuration was x86-64 "make allyesconfig".
> >>
> >>     -hpa
> >>   
> > Subject: x86/paravirt: fix missing callee-save call on pud_val
> > 
> > Fix missed convertion to using callee-saved calls for pud_val, which
> > causes a compile error when CONFIG_PARAVIRT_DEBUG is enabled.
> > 
> 
> Series applied to tip:x86/paravirt; it should make its way into
> tip:master and linux-next over the next day or two, unless there are
> failures.

there's some build trouble on VMI:

arch/x86/kernel/vmi_32.c: In function ‘activate_vmi’:
arch/x86/kernel/vmi_32.c:673: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:673: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:674: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:674: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:675: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:675: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:676: error: incompatible types in assignment
arch/x86/kernel/vmi_32.c:676: error: incompatible types in assignment

	Ingo

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> there's some build trouble on VMI:
>
> arch/x86/kernel/vmi_32.c: In function ‘activate_vmi’:
> arch/x86/kernel/vmi_32.c:673: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:673: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:674: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:674: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:675: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:675: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:676: error: incompatible types in assignment
> arch/x86/kernel/vmi_32.c:676: error: incompatible types in assignment
>   

Yes.  I sent a couple of fix patches last night, which included a fix 
for this.

    J

Subject: x86/vmi: fix interrupt enable/disable/save/restore calling convention.

Zach says:
> Enable/Disable have no clobbers at all.
> Save clobbers only return value, %eax
> Restore also clobbers nothing.

This is precisely compatible with the calling convention, so we can
just call them directly without wrapping.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/vmi_32.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

===================================================================
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -670,10 +670,11 @@
 	para_fill(pv_mmu_ops.write_cr2, SetCR2);
 	para_fill(pv_mmu_ops.write_cr3, SetCR3);
 	para_fill(pv_cpu_ops.write_cr4, SetCR4);
-	para_fill(pv_irq_ops.save_fl, GetInterruptMask);
-	para_fill(pv_irq_ops.restore_fl, SetInterruptMask);
-	para_fill(pv_irq_ops.irq_disable, DisableInterrupts);
-	para_fill(pv_irq_ops.irq_enable, EnableInterrupts);
+
+	para_fill(pv_irq_ops.save_fl.func, GetInterruptMask);
+	para_fill(pv_irq_ops.restore_fl.func, SetInterruptMask);
+	para_fill(pv_irq_ops.irq_disable.func, DisableInterrupts);
+	para_fill(pv_irq_ops.irq_enable.func, EnableInterrupts);
 
 	para_fill(pv_cpu_ops.wbinvd, WBINVD);
 	para_fill(pv_cpu_ops.read_tsc, RDTSC);

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[H. Peter Anvin]

Jeremy Fitzhardinge wrote:
> 
> Thanks.  I have a couple of additional fixes.  Also, did you pick up
> those other two io.h patches I mailed you the other day?
> 

Haven't yet, but it's on the TODO list for today (Friday got a bit busy.)

	-hpa


-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 182 bytes --]


x86/paravirt is causing boot trouble on a 32-bit box - it reboots during 
early bootup (it's a laptop so no easy access to its crashlog - if there's 
any).

config attached.

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 62218 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc3
# Wed Feb  4 00:03:51 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not set
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_IBS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP_SUPPORT=y
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_MIGRATE_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_NON_STANDARD=y
CONFIG_X86_RDC321X=y
# CONFIG_X86_ELAN is not set
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_NUMAQ=y
# CONFIG_X86_SUMMIT is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
CONFIG_X86_SUMMIT_NUMA=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_X86_DS is not set
# CONFIG_X86_PTRACE_BTS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_UP_WANTED_1=y
# CONFIG_UP_WANTED_2 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_HAVE_ARCH_BOOTMEM_NODE=y
CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_HAVE_ARCH_ALLOC_REMAP=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
# CONFIG_SUSPEND is not set
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_E_POWERSAVER=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
CONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_NET_DSA_MV88E6XXX is not set
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=y
CONFIG_TOSHIBA_FIR=y
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
# CONFIG_MCS_FIR is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=y
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_PHONET=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_MAC80211=y

#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
# CONFIG_MEGARAID_MAILBOX is not set
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_LIBFC=y
# CONFIG_FCOE is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_FD_MCS=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_IBMMCA=y
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
# CONFIG_SCSI_NCR_D700 is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_NCR_Q720=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=y
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_IT8213=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SC1200=y
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=y
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=y
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=y
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
# CONFIG_DM9102 is not set
CONFIG_ULI526X=y
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
CONFIG_HP100=y
CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_SC92031=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
CONFIG_IGB_LRO=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=y
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_JME=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_HSO=y
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_PPPOL2TP=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
CONFIG_PHONE=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF50633_PMU is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_MCA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_SCx200_ACB=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
CONFIG_CHARGER_PCF50633=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_ABITUGURU=y
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7473=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_HDAPS=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_HWMON_DEBUG_CHIP=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=y
# CONFIG_SC520_WDT is not set
CONFIG_IB700_WDT=y
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_RDC321X_WDT=y
CONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=y
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
CONFIG_W83697UG_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
CONFIG_HTC_PASIC3=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_PCF50633=y

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
CONFIG_MEDIA_TUNER_XC2028=y
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
# CONFIG_VIDEO_IR_I2C is not set

#
# Encoders/decoders and other helper chips
#

#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TDA9875=y
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y

#
# Video decoders
#
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_TCM825X=y
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA7111 is not set
# CONFIG_VIDEO_SAA7114 is not set
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_SAA7191=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=y

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=y

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_ADV7170=y
# CONFIG_VIDEO_ADV7175 is not set

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_SAA6588=y
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_CPIA_USB=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_SAA5246A=y
CONFIG_VIDEO_SAA5249=y
CONFIG_VIDEO_STRADIS=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
# CONFIG_VIDEO_ZORAN_ZR36060 is not set
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_MXB=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_IVTV=y
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
# CONFIG_SOC_CAMERA_MT9M111 is not set
CONFIG_SOC_CAMERA_MT9T031=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
CONFIG_SOC_CAMERA_TW9910=y
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_SOC_CAMERA_OV772X=y
# CONFIG_V4L_USB_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=y

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
# CONFIG_DRM is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
# CONFIG_FB_IMSTT is not set
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_I810 is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_INTEL=y
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_CARILLO_RANCH is not set
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_MBP_NVIDIA=y
CONFIG_BACKLIGHT_SAHARA=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=y
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETMOTORCONTROL is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# OTG and related infrastructure
#
CONFIG_UWB=y
CONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_SDRICOH_CS is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_ALIX2=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_DA903X=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1390 is not set
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
# CONFIG_UIO is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ALLOW_WARNINGS is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y

#
# Tracers
#
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
CONFIG_POWER_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_DYNAMIC_PRINTK_DEBUG=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_4KSTACKS is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> x86/paravirt is causing boot trouble on a 32-bit box - it reboots during 
> early bootup (it's a laptop so no easy access to its crashlog - if there's 
> any).
>
> config attached.

HPA just applied a patch which will likely fix this.  
0eb592dbba40baebec9cdde3ff4574185de6cbcc

    J

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> Ingo Molnar wrote:
>> x86/paravirt is causing boot trouble on a 32-bit box - it reboots 
>> during early bootup (it's a laptop so no easy access to its crashlog - 
>> if there's any).
>>
>> config attached.
>
> HPA just applied a patch which will likely fix this.   
> 0eb592dbba40baebec9cdde3ff4574185de6cbcc

thanks! Will need about 24 hours until i know for sure - the test-box that 
is affected by this bug triggers the problem every 10 hours or so.

	Ingo

Re: [PATCH 0 of 7] x86/paravirt: optimise pvop calls and register use

[Ingo Molnar]

* Ingo Molnar <mingo@elte.hu> wrote:

> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
> 
> > Ingo Molnar wrote:
> >> x86/paravirt is causing boot trouble on a 32-bit box - it reboots 
> >> during early bootup (it's a laptop so no easy access to its crashlog - 
> >> if there's any).
> >>
> >> config attached.
> >
> > HPA just applied a patch which will likely fix this.   
> > 0eb592dbba40baebec9cdde3ff4574185de6cbcc
> 
> thanks! Will need about 24 hours until i know for sure - the test-box that 
> is affected by this bug triggers the problem every 10 hours or so.

okay - a testbox just happened to trigger this PARAVIRT=y boot crash bug and 
i can confirm that latest tip/master fixes it.

	Ingo

Re: [PATCH 5 of 7] x86/paravirt: add register-saving thunks to reduce caller register pressure

[Andi Kleen]

Jeremy Fitzhardinge <jeremy@goop.org> writes:

> One of the problems with inserting a pile of C calls where previously
> there were none is that the register pressure is greatly increased.
> The C calling convention says that the caller must expect a certain
> set of registers may be trashed by the callee, and that the callee can
> use those registers without restriction.  This includes the function
> argument registers, and several others.
>
> This patch seeks to alleviate this pressure by introducing wrapper
> thunks that will do the register saving/restoring, so that the
> callsite doesn't need to worry about it, but the callee function can
> be conventional compiler-generated code. 

I had something like this (but not as generic) for the old pre
unification semaphores on x86-64 too. I think it's a generally useful
facility for lots of things (in fact I've been asking gcc developers
for providing this in a general way for some time).

So I would suggest to move the necessary macros to do that outside
paravirt.h into a separate include so that it can be used independently
and not call it PV_*.

-Andi

-- 
ak@linux.intel.com -- Speaking for myself only.

Re: [PATCH 5 of 7] x86/paravirt: add register-saving thunks to reduce caller register pressure

[Jeremy Fitzhardinge]

Andi Kleen wrote:
> I had something like this (but not as generic) for the old pre
> unification semaphores on x86-64 too. I think it's a generally useful
> facility for lots of things (in fact I've been asking gcc developers
> for providing this in a general way for some time).
>   

What other users do you have in mind?

> So I would suggest to move the necessary macros to do that outside
> paravirt.h into a separate include so that it can be used independently
> and not call it PV_*.

That wouldn't be too hard to do, but I don't think its something we 
should do lightly.  There are quite a few pitfalls, and the bugs can get 
pretty obscure.  It would also mean bringing out a lot of the PV_CALL 
machinery, and I'm not sure we really want to give that too much 
exposure in the light of day.

    J