From: Frank Seidel <fseidel@suse.de>
To: linux kernel <linux-kernel@vger.kernel.org>
Cc: akpm@linux-foundation.org, linux-acpi@vger.kernel.org,
linux-pm@lists.linux-foundation.org, len.brown@intel.com,
shaohuhua.li@intel.com, kristen.c.accardi@intel.com,
frank@f-seidel.de, Frans Pop <elendil@planet.nl>,
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Subject: [PATCHv2] ACPI: add missing KERN_* constants to printks
Date: Wed, 04 Feb 2009 17:03:07 +0100 [thread overview]
Message-ID: <4989BC3B.2070508@suse.de> (raw)
In-Reply-To: <4989A784.3030604@suse.de>
From: Frank Seidel <frank@f-seidel.de>
According to kerneljanitors todo list all printk calls (beginning
a new line) should have an according KERN_* constant.
Those are the missing peaces here for the acpi subsystem.
Signed-off-by: Frank Seidel <frank@f-seidel.de>
---
drivers/acpi/container.c | 5 +++--
drivers/acpi/dock.c | 8 ++++----
drivers/acpi/osl.c | 4 ++--
drivers/acpi/pci_link.c | 2 +-
drivers/acpi/sleep.c | 2 +-
drivers/acpi/video.c | 2 +-
6 files changed, 12 insertions(+), 11 deletions(-)
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1260,7 +1260,7 @@ static int acpi_video_bus_POST_info_seq_
printk(KERN_WARNING PREFIX
"This indicates a BIOS bug. Please contact the manufacturer.\n");
}
- printk("%llx\n", options);
+ printk(KERN_WARNING "%llx\n", options);
seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -163,7 +163,7 @@ static void container_notify_cb(acpi_han
case ACPI_NOTIFY_BUS_CHECK:
/* Fall through */
case ACPI_NOTIFY_DEVICE_CHECK:
- printk("Container driver received %s event\n",
+ printk(KERN_WARNING "Container driver received %s event\n",
(type == ACPI_NOTIFY_BUS_CHECK) ?
"ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
status = acpi_bus_get_device(handle, &device);
@@ -174,7 +174,8 @@ static void container_notify_cb(acpi_han
kobject_uevent(&device->dev.kobj,
KOBJ_ONLINE);
else
- printk("Failed to add container\n");
+ printk(KERN_WARNING
+ "Failed to add container\n");
}
} else {
if (ACPI_SUCCESS(status)) {
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -593,7 +593,7 @@ static int acpi_pci_link_allocate(struct
return -ENODEV;
} else {
acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING;
- printk(PREFIX "%s [%s] enabled at IRQ %d\n",
+ printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n",
acpi_device_name(link->device),
acpi_device_bid(link->device), link->irq.active);
}
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -984,7 +984,7 @@ static int dock_add(acpi_handle handle)
ret = device_create_file(&dock_device->dev, &dev_attr_docked);
if (ret) {
- printk("Error %d adding sysfs file\n", ret);
+ printk(KERN_ERR "Error %d adding sysfs file\n", ret);
platform_device_unregister(dock_device);
kfree(dock_station);
dock_station = NULL;
@@ -992,7 +992,7 @@ static int dock_add(acpi_handle handle)
}
ret = device_create_file(&dock_device->dev, &dev_attr_undock);
if (ret) {
- printk("Error %d adding sysfs file\n", ret);
+ printk(KERN_ERR "Error %d adding sysfs file\n", ret);
device_remove_file(&dock_device->dev, &dev_attr_docked);
platform_device_unregister(dock_device);
kfree(dock_station);
@@ -1001,7 +1001,7 @@ static int dock_add(acpi_handle handle)
}
ret = device_create_file(&dock_device->dev, &dev_attr_uid);
if (ret) {
- printk("Error %d adding sysfs file\n", ret);
+ printk(KERN_ERR "Error %d adding sysfs file\n", ret);
device_remove_file(&dock_device->dev, &dev_attr_docked);
device_remove_file(&dock_device->dev, &dev_attr_undock);
platform_device_unregister(dock_device);
@@ -1011,7 +1011,7 @@ static int dock_add(acpi_handle handle)
}
ret = device_create_file(&dock_device->dev, &dev_attr_flags);
if (ret) {
- printk("Error %d adding sysfs file\n", ret);
+ printk(KERN_ERR "Error %d adding sysfs file\n", ret);
device_remove_file(&dock_device->dev, &dev_attr_docked);
device_remove_file(&dock_device->dev, &dev_attr_undock);
device_remove_file(&dock_device->dev, &dev_attr_uid);
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -228,10 +228,10 @@ void acpi_os_vprintf(const char *fmt, va
if (acpi_in_debugger) {
kdb_printf("%s", buffer);
} else {
- printk("%s", buffer);
+ printk(KERN_WARNING "%s", buffer);
}
#else
- printk("%s", buffer);
+ printk(KERN_WARNING "%s", buffer);
#endif
}
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -679,7 +679,7 @@ static void acpi_power_off_prepare(void)
static void acpi_power_off(void)
{
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
- printk("%s called\n", __func__);
+ printk(KERN_DEBUG "%s called\n", __func__);
local_irq_disable();
acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);
next prev parent reply other threads:[~2009-02-04 16:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-04 14:34 [PATCH] ACPI: add missing KERN_* constants to printks Frank Seidel
2009-02-04 15:28 ` Frans Pop
2009-02-04 15:31 ` Frank Seidel
2009-02-04 15:44 ` Geert Uytterhoeven
2009-02-04 15:48 ` Frank Seidel
2009-02-04 16:12 ` Frans Pop
2009-02-04 16:48 ` Geert Uytterhoeven
2009-02-04 16:03 ` Frank Seidel [this message]
2009-02-07 5:38 ` [PATCHv2] " Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4989BC3B.2070508@suse.de \
--to=fseidel@suse.de \
--cc=Geert.Uytterhoeven@sonycom.com \
--cc=akpm@linux-foundation.org \
--cc=elendil@planet.nl \
--cc=frank@f-seidel.de \
--cc=kristen.c.accardi@intel.com \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=shaohuhua.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox