public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
To: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pciehp:  Handle interrupts that happen during initialization.
Date: Wed, 18 Feb 2009 14:48:49 +0900	[thread overview]
Message-ID: <499BA141.2090403@jp.fujitsu.com> (raw)
In-Reply-To: <m1y6w4u001.fsf@fess.ebiederm.org>

Eric W. Biederman wrote:
> Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> writes:
> 
>> Eric W. Biederman wrote:
>>> ebiederm@xmission.com (Eric W. Biederman) writes:
>>>
>>>> And on the big gotcha's I have found one more I am tracking.
>>>>
>>>> I am seeing pci bridges with a NULL pointer for the subordinate bus.
>>>> Earlier I had thought that this was a symptom of the double remove
>>>> but I have been able to reproduce it without that.
>>>>
>>>> On just a little bit deeper investigation it looks like the cases
>>>> are dying are all coming when the nested bridge reappears.
>>>>
>>>> Which is wrong on so many levels as I am toggle power to the outer
>>>> slot, so the nested bridge should not even exist at that time.  Ugh.
>>>> More tracing to for me on that one.
>>> Ok. Got it.  I was processing the interrupt for a device after it had
>>> been hot removed but before the device state had disappeared.
>>>
>>> pcie_isr looks like it would be even worse in that situation.  Looping forever
>>> if pciehp_readw(ctrl, PCIE_EXPSLTA) always succeed sand returns 0xffff.
>>>
>>> That loop in there appears impossibly misguided.  If the pending interrupt
>>> values change after you have received the interrupt another instance
>>> of the same interrupt should be pending so the loop should be completely
>>> unnecessary.
>>>
>> For level-triggered interrupt, I think it's true.
>>
>> But for edge-triggered interrupt, I don't think it's true. I think
>> only one interrupt is generated if the first hotplug event occurs
>> and the second hotplug event occurs before clearing the status of
>> first hotplug event.
> 
> My test case is edge-triggered MSI's.  The issue is that I get an interrupt
> from the card that I am unplugging, but by the time the interrupt handler
> is executed the card is physically absent, but the pci_dev structure is
> still present in the kernel.
> 

Ok, I understood what is happening. Could you try the following patch?
It is currently in Jesse's linux-next.

http://marc.info/?l=linux-pci&m=123364118418484&w=2

BTW, I don't think surprise removal is well tested.

Thanks,
Kenji Kaneshige



  reply	other threads:[~2009-02-18  5:49 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-29  3:31 [PATCH] pciehp: Handle interrupts that happen during initialization Eric W. Biederman
2009-01-29  7:34 ` Kenji Kaneshige
2009-02-13 19:29   ` Jesse Barnes
2009-02-14  4:06     ` Eric W. Biederman
2009-02-14 12:53       ` Eric W. Biederman
2009-02-14 14:56         ` Eric W. Biederman
2009-02-16  8:02           ` Kenji Kaneshige
2009-02-17 23:17             ` Eric W. Biederman
2009-02-18  5:48               ` Kenji Kaneshige [this message]
2009-02-23 11:08                 ` Eric W. Biederman
2009-02-24 17:05                   ` Jesse Barnes
2009-02-24 17:08                   ` Jesse Barnes
2009-02-16  8:00       ` Kenji Kaneshige
2009-02-18  0:40         ` Eric W. Biederman
2009-02-18  7:12           ` Kenji Kaneshige
2009-02-18  8:47             ` Eric W. Biederman
2009-02-20  6:18               ` Kenji Kaneshige
2009-02-23 11:17               ` Eric W. Biederman
2009-02-24 17:38 ` Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=499BA141.2090403@jp.fujitsu.com \
    --to=kaneshige.kenji@jp.fujitsu.com \
    --cc=ebiederm@xmission.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox