Re: [PATCH] pci: enable MSI on 8132

[Yinghai Lu <yinghai@kernel.org>]

James Bottomley wrote:
> On Wed, 2009-02-18 at 11:08 -0800, Yinghai Lu wrote:
>> James Bottomley wrote:
>>> On Wed, 2009-02-18 at 10:04 -0800, Andrew Morton wrote:
>>>
>>>> Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as
>>>> well, to fix this regression?
>>> No ... it's a separate issue.  MSI was enabled for fusion SAS in 2.6.26;
>>> the problem msi patch which the above corrects actually has the effect
>>> of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a
>>> kernel that's been tested here.
>>>
>> so for 2.6.26, 27, 28 need pci-enable-msi-on-8132.patch
> 
> I'm a bit lost with the names, but if that's the PCI quirk fix, then yes

yes

> 
>> 2.6.29 need pci-enable-msi-on-8132.patch and mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch
> 
> Like I said, I'm happy to have MSI completely disabled until LSI wants
> to comment, so no ... only the PCI quirk fix.  The true fix is to have
> the drivers participate in dynamic testing of MSI IRQ routing, but I've
> somewhat lost sight of that.

[PATCH] mpt: fix enable lsi sas to use msi as default

Impact: fix bug

the third param in module_param(,,) is perm instead of default value.
we still need to assign default at first.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 drivers/message/fusion/mptbase.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Index: linux-2.6/drivers/message/fusion/mptbase.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptbase.c
+++ linux-2.6/drivers/message/fusion/mptbase.c
@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
 		controllers (default=0)");
 
-static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+static int mpt_msi_enable_sas = 1;
+module_param(mpt_msi_enable_sas, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
 		controllers (default=1)");
 
or you want

[PATCH] mpt: fix disable lsi sas to use msi as default

Impact: fix bug

the third param in module_param(,,) is perm instead of default value.
we still need to assign default at first.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 drivers/message/fusion/mptbase.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Index: linux-2.6/drivers/message/fusion/mptbase.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptbase.c
+++ linux-2.6/drivers/message/fusion/mptbase.c
@@ -91,9 +91,9 @@ MODULE_PARM_DESC(mpt_msi_enable_fc, " En
 		controllers (default=0)");
 
 static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+module_param(mpt_msi_enable_sas, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
-		controllers (default=1)");
+		controllers (default=0)");
 
 
 static int mpt_channel_mapping;

anyway we need to fix the typo.

YH