public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: Andy Isaacson <adi@hexapodia.org>,
	Maciej Rutecki <maciej.rutecki@gmail.com>,
	"Rafael J. Wysocki" <rjw@sisk.pl>, Eric Anholt <eric@anholt.net>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	"lenb@kernel.org" <lenb@kernel.org>,
	mjg@redhat.com, Andrew Morton <akpm@linux-foundation.org>,
	rui.zhang@intel.com, airlied@redhat.com
Subject: Re: [Linux 2.6.29-rc6] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page
Date: Tue, 24 Feb 2009 11:48:31 -0800	[thread overview]
Message-ID: <49A44F0F.4060105@kernel.org> (raw)
In-Reply-To: <20090224194432.GB28772@elte.hu>

Ingo Molnar wrote:
> * Yinghai Lu <yinghai@kernel.org> wrote:
> 
>> On Mon, Feb 23, 2009 at 7:23 PM, Andy Isaacson <adi@hexapodia.org> wrote:
>>> On Mon, Feb 23, 2009 at 05:01:10PM -0800, Yinghai Lu wrote:
>>>> CONFIG_MTRR=y
>>>> CONFIG_MTRR_SANITIZER=y
>>>> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
>>>> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
>>>>
>>>> should help mtrr ones.
>>>>
>>>> please post bootlog with those option set.
>>> Doesn't help here (Dell E6400).
>>>
>>> [    0.000000] Initializing cgroup subsys cpuset
>>> [    0.000000] Initializing cgroup subsys cpu
>>> [    0.000000] Linux version 2.6.29-rc6-dirty (adi@cvp-loaner-01) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #14 SMP Mon Feb 23 19:05:31 PST 2009
>>> [    0.000000] Command line: root=/dev/sda1 ro
>>> [    0.000000] KERNEL supported cpus:
>>> [    0.000000]   Intel GenuineIntel
>>> [    0.000000]   AMD AuthenticAMD
>>> [    0.000000]   Centaur CentaurHauls
>>> [    0.000000] BIOS-provided physical RAM map:
>>> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>>> [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
>>> [    0.000000]  BIOS-e820: 0000000000100000 - 000000007d04d400 (usable)
>>> [    0.000000]  BIOS-e820: 000000007d04d400 - 000000007d04f400 (ACPI NVS)
>>> [    0.000000]  BIOS-e820: 000000007d04f400 - 0000000080000000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
>>> [    0.000000] DMI 2.4 present.
>>> [    0.000000] last_pfn = 0x7d04d max_arch_pfn = 0x100000000
>>> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>>> [    0.000000] original variable MTRRs
>>> [    0.000000] reg 0, base: 0GB, range: 32GB, type WB
>>> [    0.000000] reg 1, base: 3584MB, range: 512MB, type UC
>>> [    0.000000] reg 2, base: 2012MB, range: 4MB, type UC
>>> [    0.000000] reg 3, base: 2016MB, range: 32MB, type UC
>> the BIOS is so sick
>> according to MTRR, it said:
>> [0,2012M) is WB
>> [2048M, 3.5G) is WB too
>> [4G, 32G) is WB
>>
>> but according to e820: about [0,2g) is RAM...
>>
>> really not how to workaround in BIOS.
> 
> I suspect the box was tested with other OSs and limped along 
> there. Should we perhaps clear non-sensical MTRR entries?
> 

according to e820 to update MTRR?

in the previous discussion, some SMI region that is not stated in e820 could still need to be covered by MTRR with WB

YH

  reply	other threads:[~2009-02-24 19:51 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-23 14:46 [Linux 2.6.29-rc6] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page Maciej Rutecki
2009-02-23 15:22 ` Sitsofe Wheeler
2009-02-23 18:27   ` Maciej Rutecki
2009-02-23 20:02 ` Eric Anholt
2009-02-23 21:30   ` Rafael J. Wysocki
2009-02-23 21:40     ` Maciej Rutecki
2009-02-24  1:01       ` Yinghai Lu
2009-02-24  3:23         ` Andy Isaacson
2009-02-24  5:50           ` Yinghai Lu
2009-02-24  6:48             ` Andy Isaacson
2009-02-24 22:54               ` Andy Isaacson
2009-02-25 14:35                 ` Zdenek Kabelac
2009-02-27 11:14                   ` Maciej Rutecki
2009-02-24 19:44             ` Ingo Molnar
2009-02-24 19:48               ` Yinghai Lu [this message]
2009-02-24 21:39                 ` Ingo Molnar
2009-02-24 21:44                   ` Dave Airlie
2009-02-24 21:59                     ` Linus Torvalds
2009-02-24 22:10                       ` Pallipadi, Venkatesh
2009-02-24  6:54         ` Maciej Rutecki
2009-02-24  8:54           ` Maciej Rutecki
2009-02-24  9:01             ` Maciej Rutecki
2009-02-24 18:25             ` Yinghai Lu
2009-02-24  3:56       ` Andy Isaacson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49A44F0F.4060105@kernel.org \
    --to=yinghai@kernel.org \
    --cc=adi@hexapodia.org \
    --cc=airlied@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=eric@anholt.net \
    --cc=jbarnes@virtuousgeek.org \
    --cc=lenb@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.rutecki@gmail.com \
    --cc=mingo@elte.hu \
    --cc=mjg@redhat.com \
    --cc=rjw@sisk.pl \
    --cc=rui.zhang@intel.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox