From: Yinghai Lu <yinghai@kernel.org>
To: "Kevin O'Connor" <kevin@koconnor.net>
Cc: Ingo Molnar <mingo@elte.hu>, "Rafael J. Wysocki" <rjw@sisk.pl>,
Stefan Reinauer <stepan@coresystems.de>,
linux-kernel@vger.kernel.org, coreboot@coreboot.org,
Jaswinder Singh Rajput <jaswinder@infradead.org>
Subject: Re: MPTable can not be high-memory on Linux
Date: Sat, 28 Feb 2009 19:10:18 -0800 [thread overview]
Message-ID: <49A9FC9A.2030707@kernel.org> (raw)
In-Reply-To: <20090228234127.GA29964@morn.localdomain>
Kevin O'Connor wrote:
> On Sun, Feb 22, 2009 at 10:14:56PM -0800, Yinghai Lu wrote:
>> please check
>>
>> [PATCH] x86: check physptr with max_low_pfn on 32bit
>
> Thanks for looking at this issue.
>
> Unfortunately, the kernel still does not work with the applied patch.
> Neither 32bit nor 64bit kernels boot. (Note, I applied the patch to
> Linus' git, and I had to replace mpf->physptr with mpf->mpf_physptr.)
>
> The error messages from before and after patching appear to be the
> same.
>
>
please add this patch too
[PATCH] x86: ioremap mptable
Impact: fix boot with mptable above max_low_mapped
try to use early_ioremap it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/mpparse.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -611,12 +611,20 @@ static void __init __get_smp_config(unsi
construct_default_ISA_mptable(mpf->feature1);
} else if (mpf->physptr) {
+ struct mpc_table *mpc;
+ unsigned int length;
+ mpc = early_ioremap(mpf->physptr, PAGE_SIZE);
+ length = mpc->length;
+ apic_printk(APIC_VERBOSE, " mpc: %x-%x\n", mpf->physptr,
+ mpf->physptr + length);
+ early_iounmap(mpc, PAGE_SIZE);
+ mpc = early_ioremap(mpf->physptr, length);
/*
* Read the physical hardware table. Anything here will
* override the defaults.
*/
- if (!smp_read_mpc(phys_to_virt(mpf->physptr), early)) {
+ if (!smp_read_mpc(mpc, early)) {
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 0;
#endif
@@ -624,9 +632,12 @@ static void __init __get_smp_config(unsi
"BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. "
"(tell your hw vendor)\n");
+ early_iounmap(mpc, length);
return;
}
+ early_iounmap(mpc, length);
+
if (early)
return;
#ifdef CONFIG_X86_IO_APIC
next prev parent reply other threads:[~2009-03-01 3:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <499DB40C.1060205@coresystems.de>
[not found] ` <499DB480.1000909@coresystems.de>
[not found] ` <499DB6D8.5040706@coresystems.de>
[not found] ` <499DBDA0.2010606@coresystems.de>
[not found] ` <499DCE79.8020809@coresystems.de>
2009-02-22 15:25 ` MPTable can not be high-memory on Linux Kevin O'Connor
2009-02-22 17:06 ` Rafael J. Wysocki
2009-02-22 21:33 ` Yinghai Lu
2009-02-22 22:32 ` Kevin O'Connor
2009-02-22 22:58 ` Ingo Molnar
2009-02-23 6:14 ` Yinghai Lu
2009-02-23 6:42 ` Ingo Molnar
2009-02-28 23:41 ` Kevin O'Connor
2009-03-01 3:10 ` Yinghai Lu [this message]
2009-03-01 18:04 ` Kevin O'Connor
2009-03-02 3:23 ` [PATCH] x86: ioremap mptable -v2 Yinghai Lu
2009-03-02 10:18 ` Ingo Molnar
2009-03-02 10:19 ` Ingo Molnar
2009-03-02 20:07 ` Yinghai Lu
2009-03-02 20:29 ` Ingo Molnar
2009-03-02 20:46 ` Yinghai Lu
2009-03-02 20:57 ` Ingo Molnar
2009-02-22 17:53 ` MPTable can not be high-memory on Linux Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49A9FC9A.2030707@kernel.org \
--to=yinghai@kernel.org \
--cc=coreboot@coreboot.org \
--cc=jaswinder@infradead.org \
--cc=kevin@koconnor.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rjw@sisk.pl \
--cc=stepan@coresystems.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox