From: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
To: Alex Chiang <achiang@hp.com>
Cc: jbarnes@virtuousgeek.org, shimada-yxb@necst.nec.co.jp,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 00/12] PCI core learns hotplug
Date: Thu, 19 Mar 2009 23:09:07 +0900 [thread overview]
Message-ID: <49C25203.60005@jp.fujitsu.com> (raw)
In-Reply-To: <20090318222426.887.1008.stgit@bob.kio>
Alex Chiang wrote:
> We're getting close to the new merge window, and I _think_ this
> patch series is ready for consideration. Notably:
>
> - multiple rescans/removes of devices with and without bridges
> - verified that resource allocation after multiple remove/rescan
> cycles is the same as what we had during initial boot
> - fixes the complete suckage of fakephp (that I created)
> - doesn't affect existing hotplug drivers
> - tested on x86 and ia64 platforms
>
> Please review, and consider testing. For testing ease, you can pull
> from my git branch:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/achiang/pci-hotplug.git
> branch 'test-20090318' is what you want
>
When I rescan the bus even without remove anything, I got the
following messages. And enable count of the bridge is incremented
every time.
[17240.309096] pci 0000:2d:00.0: BAR 6: bogus alignment [0x0-0x0] flags 0x2
[17240.309135] pcieport-driver 0000:00:01.0: setting latency timer to 64
[17240.309143] pcieport-driver 0000:00:02.0: setting latency timer to 64
[17240.309150] pcieport-driver 0000:14:00.0: setting latency timer to 64
[17240.309159] pcieport-driver 0000:15:00.0: setting latency timer to 64
[17240.309166] pcieport-driver 0000:15:01.0: setting latency timer to 64
[17240.309174] pcieport-driver 0000:15:02.0: setting latency timer to 64
[17240.309182] pci 0000:14:00.3: setting latency timer to 64
[17240.309189] pcieport-driver 0000:00:03.0: setting latency timer to 64
[17240.309198] pcieport-driver 0000:2a:00.0: setting latency timer to 64
[17240.309207] pcieport-driver 0000:2b:02.0: setting latency timer to 64
[17240.309215] pcieport-driver 0000:2b:04.0: setting latency timer to 64
[17240.309223] pcieport-driver 0000:00:04.0: setting latency timer to 64
[17240.309231] pcieport-driver 0000:2e:00.0: setting latency timer to 64
[17240.309240] pcieport-driver 0000:2f:02.0: setting latency timer to 64
[17240.309248] pcieport-driver 0000:2f:04.0: setting latency timer to 64
[17240.309256] pcieport-driver 0000:00:06.0: setting latency timer to 64
[17240.309264] pcieport-driver 0000:51:00.0: setting latency timer to 64
[17240.309273] pcieport-driver 0000:52:02.0: setting latency timer to 64
[17240.309281] pcieport-driver 0000:52:04.0: setting latency timer to 64
[17240.309291] pci 0000:64:00.0: setting latency timer to 64
[17240.309300] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[17240.309308] pci 0000:00:1e.0: setting latency timer to 64
[root@localhost pci]# echo 1 > rescan
[root@localhost pci]# cat /sys/bus/pci/devices/0000\:2f\:04.0/enable
6
[root@localhost pci]# echo 1 > rescan
[root@localhost pci]# cat /sys/bus/pci/devices/0000\:2f\:04.0/enable
7
[root@localhost pci]# echo 1 > rescan
[root@localhost pci]# cat /sys/bus/pci/devices/0000\:2f\:04.0/enable
8
[root@localhost pci]# echo 1 > rescan
[root@localhost pci]# cat /sys/bus/pci/devices/0000\:2f\:04.0/enable
9
Thanks,
Kenji Kaneshige
next prev parent reply other threads:[~2009-03-19 14:09 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-18 22:39 [PATCH v4 00/12] PCI core learns hotplug Alex Chiang
2009-03-18 22:39 ` [PATCH v4 01/12] PCI: pci_is_root_bus helper Alex Chiang
2009-03-18 22:39 ` [PATCH v4 02/12] PCI: don't scan existing devices Alex Chiang
2009-03-18 22:39 ` [PATCH v4 03/12] PCI: pci_scan_slot() returns newly found devices Alex Chiang
2009-03-18 22:39 ` [PATCH v4 04/12] PCI: always scan child buses Alex Chiang
2009-03-18 22:39 ` [PATCH v4 05/12] PCI: do not initialize bridges more than once Alex Chiang
2009-03-18 22:39 ` [PATCH v4 06/12] PCI: Introduce pci_rescan_bus() Alex Chiang
2009-03-19 9:27 ` Andrew Morton
2009-03-19 17:05 ` Alex Chiang
2009-03-19 17:42 ` Greg KH
2009-03-19 17:49 ` Alex Chiang
2009-03-19 18:09 ` Matthew Wilcox
2009-03-19 18:09 ` Greg KH
2009-03-19 9:29 ` Andrew Morton
2009-03-19 17:11 ` Alex Chiang
2009-03-18 22:40 ` [PATCH v4 07/12] PCI: Introduce /sys/bus/pci/rescan Alex Chiang
2009-03-19 9:34 ` Andrew Morton
2009-03-19 17:11 ` Alex Chiang
2009-03-19 22:55 ` Trent Piepho
2009-03-19 23:21 ` Alex Chiang
2009-03-18 22:40 ` [PATCH v4 08/12] PCI: Introduce /sys/bus/pci/devices/.../remove Alex Chiang
2009-03-19 9:43 ` Andrew Morton
2009-03-19 16:06 ` Greg KH
2009-03-19 16:30 ` Alex Chiang
2009-03-19 14:17 ` Kenji Kaneshige
2009-03-19 16:41 ` Alex Chiang
2009-03-19 20:43 ` Trent Piepho
2009-03-19 20:46 ` Alex Chiang
2009-03-19 23:19 ` Kenji Kaneshige
2009-03-20 3:53 ` Alex Chiang
2009-03-18 22:40 ` [PATCH v4 09/12] PCI: Introduce /sys/bus/pci/devices/.../rescan Alex Chiang
2009-03-18 22:40 ` [PATCH v4 10/12] PCI Hotplug: restore fakephp interface with complete reimplementation Alex Chiang
2009-03-19 9:45 ` Andrew Morton
2009-03-19 17:00 ` Alex Chiang
2009-03-19 19:24 ` Trent Piepho
2009-03-18 22:40 ` [PATCH v4 11/12] PCI Hotplug: rename legacy_fakephp to fakephp Alex Chiang
2009-03-18 22:40 ` [PATCH v4 12/12] PCI Hotplug: schedule fakephp for feature removal Alex Chiang
2009-03-19 8:12 ` [PATCH v4 00/12] PCI core learns hotplug Kenji Kaneshige
2009-03-19 17:07 ` Alex Chiang
2009-03-20 4:15 ` Alex Chiang
2009-03-19 14:09 ` Kenji Kaneshige [this message]
2009-03-19 17:13 ` Alex Chiang
2009-03-20 5:16 ` Alex Chiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C25203.60005@jp.fujitsu.com \
--to=kaneshige.kenji@jp.fujitsu.com \
--cc=achiang@hp.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=shimada-yxb@necst.nec.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox