From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ingo Molnar <mingo@elte.hu>,
linux-pci@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: x86/pci: Detect mmconfig on nVidia MCP55 -v2 - resend
Date: Thu, 19 Mar 2009 20:57:56 -0700 [thread overview]
Message-ID: <49C31444.1000700@kernel.org> (raw)
In-Reply-To: <20090319193218.445ce0ca@hobbes.lan>
From: Ed Swierk <eswierk@aristanetworks.com>
Subject: [PATCH] x86/pci: Detect mmconfig on nVidia MCP55 -v2
Detect and enable memory-mapped PCI configuration space on the nVidia
MCP55 southbridge. Tested against 2.6.27.4 on an Arista Networks
development board with one MCP55, Coreboot firmware, no ACPI.
v2: add multi mcp55 support, and conexist with amd quad core system by Yinghai
also only enable it only when acpi=off or acpi is not built-in
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/pci/mmconfig-shared.c | 64 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -166,6 +166,68 @@ static const char __init *pci_mmcfg_amd_
return "AMD Family 10h NB";
}
+static bool __initdata mcp55_checked;
+static const char __init *pci_mmcfg_nvidia_mcp55(void)
+{
+ int bus;
+ int mcp55_mmconf_found = 0;
+
+ static const u32 extcfg_regnum = 0x90;
+ static const u32 extcfg_regsize = 4;
+ static const u32 extcfg_enable_mask = 1<<31;
+ static const u32 extcfg_start_mask = 0xff<<16;
+ static const int extcfg_start_shift = 16;
+ static const u32 extcfg_size_mask = 0x3<<28;
+ static const int extcfg_size_shift = 28;
+ static const int extcfg_sizebus[] = {0x100, 0x80, 0x40, 0x20};
+ static const u32 extcfg_base_mask[] = {0x7ff8, 0x7ffc, 0x7ffe, 0x7fff};
+ static const int extcfg_base_lshift = 25;
+
+ /*
+ * do check if amd fam10h already took over
+ */
+ if (!acpi_disabled || pci_mmcfg_config_num || mcp55_checked)
+ return NULL;
+
+ mcp55_checked = true;
+ for (bus = 0; bus < 256; bus++) {
+ u64 base;
+ u32 l, extcfg;
+ u16 vendor, device;
+ int start, size_index, end;
+
+ raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), 0, 4, &l);
+ vendor = l & 0xffff;
+ device = (l >> 16) & 0xffff;
+
+ if (PCI_VENDOR_ID_NVIDIA != vendor || 0x0369 != device)
+ continue;
+
+ raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), extcfg_regnum,
+ extcfg_regsize, &extcfg);
+
+ if (!(extcfg & extcfg_enable_mask))
+ continue;
+
+ if (extend_mmcfg(1) == -1)
+ continue;
+
+ size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift;
+ base = extcfg & extcfg_base_mask[size_index];
+ /* base could > 4G */
+ base <<= extcfg_base_lshift;
+ start = (extcfg & extcfg_start_mask) >> extcfg_start_shift;
+ end = start + extcfg_sizebus[size_index] - 1;
+ fill_one_mmcfg(base, 0, start, end);
+ mcp55_mmconf_found++;
+ }
+
+ if (!mcp55_mmconf_found)
+ return NULL;
+
+ return "nVidia MCP55";
+}
+
struct pci_mmcfg_hostbridge_probe {
u32 bus;
u32 devfn;
@@ -183,6 +245,8 @@ static struct pci_mmcfg_hostbridge_probe
0x1200, pci_mmcfg_amd_fam10h },
{ 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD,
0x1200, pci_mmcfg_amd_fam10h },
+ { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_NVIDIA,
+ 0x0369, pci_mmcfg_nvidia_mcp55 },
};
static int __init cmp_mmcfg(const void *x1, const void *x2)
next prev parent reply other threads:[~2009-03-20 3:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090205181505.GB5661@elte.hu>
[not found] ` <20090319193218.445ce0ca@hobbes.lan>
2009-03-20 3:55 ` [PATCH] x86/pci: host mmconfig detect clean up v3 - resend Yinghai Lu
2009-03-20 18:40 ` Jesse Barnes
2009-03-20 3:57 ` Yinghai Lu [this message]
2009-03-20 18:41 ` x86/pci: Detect mmconfig on nVidia MCP55 -v2 " Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C31444.1000700@kernel.org \
--to=yinghai@kernel.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox