From: Rui Santos <rsantos@grupopie.com>
To: "Michael Büker" <m.bueker@berlin.de>
Cc: Francois Romieu <romieu@fr.zoreil.com>,
linux-kernel@vger.kernel.org, Michael Buesch <mb@bu3sch.de>
Subject: Re: 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too
Date: Mon, 23 Mar 2009 14:57:52 +0000 [thread overview]
Message-ID: <49C7A370.9070601@grupopie.com> (raw)
In-Reply-To: <200903231529.18064.m.bueker@berlin.de>
Michael Büker wrote:
> On Sunday 22 March 2009, Francois Romieu wrote:
>
> I have not tried your patches, but I'd like to point out that I can also
> reproduce this error with a card that uses the 8139too driver, so it seems
> unlikely to me that the root of it all lies in the r8169 code.
>
> Please don't be annoyed if this comment is utterly unqualified, it just seems
> like a point that should be made :)
>
There are also a few other notes that should be taken into
consideration, witch I already mentioned:
1) I have 3 other NIC's on the same machine that also use r8169 driver.
I cannot reproduce this problem in any of them. These are PCI cards.
2) The card on which I can reproduce this problem is a PCI Express one (
on board ).
3) If I compile the kernel without MSI/MSI-X support, I can't also
reproduce the problem. You may test it by booting with pci=nomsi
I believe that Francoi's patches (correct me if I'm wrong), are meant
for him just be sure/clue on where the problem lies. I'll test those
patches in a few hours and will report back the results.
> Michael
>
>
--
Regards,
Rui Santos
next prev parent reply other threads:[~2009-03-23 14:58 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-04 17:28 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Michael Büker
2009-03-04 22:43 ` Francois Romieu
2009-03-06 0:17 ` Michael Büker
2009-03-08 10:27 ` Tom Weber
2009-03-10 5:42 ` Tom Weber
2009-03-09 12:07 ` Rui Santos
2009-03-13 18:29 ` Rui Santos
2009-03-16 13:07 ` Rui Santos
2009-03-22 21:12 ` Francois Romieu
2009-03-22 21:19 ` Michael Buesch
2009-03-22 22:00 ` Francois Romieu
2009-03-22 22:09 ` Michael Buesch
2009-03-22 22:27 ` Francois Romieu
2009-03-22 22:38 ` Michael Buesch
2009-03-23 11:47 ` Michael Buesch
2009-03-23 12:47 ` Michael Buesch
2009-03-23 23:47 ` Francois Romieu
2009-03-24 9:43 ` Michael Buesch
2009-03-23 14:29 ` Michael Büker
2009-03-23 14:57 ` Rui Santos [this message]
2009-03-23 15:04 ` Michael Büker
2009-03-25 11:40 ` Rui Santos
2009-04-04 17:50 ` Michael Buesch
2009-05-10 13:38 ` Michael Riepe
2009-05-10 15:01 ` Michael S. Zick
2009-05-10 15:10 ` Michael S. Zick
2009-05-10 15:53 ` Michael Buesch
2009-05-10 16:27 ` Michael Riepe
2009-05-10 17:09 ` Michael S. Zick
2009-05-11 0:29 ` David Dillow
2009-05-11 20:48 ` Michael Buesch
2009-05-11 21:10 ` Michael Buesch
2009-05-11 21:29 ` David Dillow
2009-05-11 21:59 ` Michael Buesch
2009-05-12 20:29 ` Michael Riepe
2009-05-14 2:38 ` David Dillow
2009-05-14 18:37 ` Michael Riepe
2009-05-14 19:14 ` David Dillow
2009-05-14 19:42 ` Michael Riepe
2009-05-23 1:29 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts David Dillow
2009-05-23 9:24 ` Michael Buesch
2009-05-23 14:35 ` Michael Riepe
2009-05-23 14:44 ` Michael Buesch
2009-05-23 15:01 ` Michael Riepe
2009-05-23 16:40 ` Michael Buesch
2009-05-23 14:51 ` David Dillow
2009-05-23 16:12 ` Michael Riepe
2009-05-23 16:45 ` Michael Buesch
2009-05-23 16:46 ` David Dillow
2009-05-23 16:50 ` Michael Buesch
2009-05-23 16:53 ` Michael Riepe
2009-05-23 17:03 ` David Dillow
2009-05-24 21:15 ` Francois Romieu
2009-05-24 22:55 ` David Dillow
2009-05-26 5:55 ` David Miller
2009-05-26 18:22 ` Michael Buesch
2009-05-26 21:52 ` David Miller
2009-05-26 22:14 ` David Miller
2009-05-26 22:40 ` Michael Riepe
2009-05-26 22:43 ` David Miller
2009-05-26 23:10 ` David Miller
2009-05-27 16:19 ` Michael Buesch
2009-06-16 19:32 ` Rui Santos
2009-08-21 20:57 ` Eric W. Biederman
2009-08-21 21:22 ` Michael Riepe
2009-08-21 22:59 ` David Dillow
2009-08-21 23:34 ` David Dillow
2009-08-22 0:24 ` Eric W. Biederman
2009-08-22 11:48 ` Eric W. Biederman
2009-08-22 12:07 ` Eric W. Biederman
2009-08-22 20:43 ` David Dillow
2009-08-23 17:17 ` Jarek Poplawski
2009-08-23 17:43 ` Michal Soltys
2009-08-23 17:54 ` Jarek Poplawski
2009-08-24 2:37 ` Eric W. Biederman
2009-08-25 0:51 ` Eric W. Biederman
2009-08-25 2:59 ` David Dillow
2009-08-25 20:22 ` Eric W. Biederman
2009-08-25 20:40 ` David Dillow
2009-08-25 21:24 ` Eric W. Biederman
2009-08-25 21:46 ` David Dillow
2009-08-25 22:19 ` Francois Romieu
2009-08-26 3:47 ` Eric W. Biederman
2009-08-26 7:58 ` [PATCH] r8169: Reduce looping in the interrupt handler Eric W. Biederman
2009-08-26 13:56 ` David Dillow
2009-08-26 13:59 ` David Dillow
2009-08-26 20:02 ` Eric W. Biederman
2009-08-26 21:30 ` Francois Romieu
2009-08-26 21:40 ` Eric W. Biederman
2009-08-27 5:24 ` Francois Romieu
2009-08-27 5:38 ` Eric W. Biederman
2009-08-27 23:20 ` Francois Romieu
2009-08-28 1:17 ` Eric W. Biederman
2009-08-28 1:29 ` David Dillow
2009-08-30 20:37 ` Francois Romieu
2009-08-30 20:53 ` Eric W. Biederman
2009-09-01 3:33 ` David Dillow
2009-09-01 9:20 ` Francois Romieu
2009-08-25 21:37 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts Eric W. Biederman
2009-08-25 21:54 ` David Dillow
2009-08-25 23:11 ` Francois Romieu
2009-05-12 11:10 ` 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Krzysztof Halasa
2009-05-12 21:45 ` Michael Riepe
2009-05-13 6:11 ` Francois Romieu
2009-05-13 6:27 ` Michael Riepe
2009-05-13 19:34 ` Krzysztof Halasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C7A370.9070601@grupopie.com \
--to=rsantos@grupopie.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.bueker@berlin.de \
--cc=mb@bu3sch.de \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox