From: Niel Lambrechts <niel.lambrechts@gmail.com>
To: "linux.kernel" <linux-kernel@vger.kernel.org>
Subject: 2.6.29: EXT4: __ext4_get_inode_loc errors after s2disk
Date: Tue, 24 Mar 2009 22:25:57 +0200 [thread overview]
Message-ID: <49C941D5.1000509@gmail.com> (raw)
Hi,
After upgrading to 2.6.29 I get the below errors after resuming from
hibernating with s2disk. I ran fsck and tried doing the same thing again
in 2.6.28.9-pae, but do not get any errors there.
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs: barriers enabled
kjournald2 starting: pid 649, dev sda6:8, commit interval 5 seconds
EXT4 FS on sda6, internal journal on sda6:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda6 with ordered data mode
EXT4 (no)acl options not supported
Adding 2099328k swap on /dev/sda5. Priority:-1 extents:1across:2099328k
EXT3 FS on sda7, internal journal
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Starting disk
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
sd 0:0:0:0: [sda] Add. Sense: No additional sense information
end_request: I/O error, dev sda, sector 242190447
EXT4-fs error (device sda6): __ext4_get_inode_loc: <6>sd 0:0:0:0: [sda]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
sd 0:0:0:0: [sda] unable to read inode block - inode=2346519,
block=9404418Add. Sense: No additional sense information end_request:
I/O error, dev sda, sector 242190703
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
EXT4-fs error (device sda6) in ext4_reserve_inode_write: IO failure
Any ideas?
Niel
next reply other threads:[~2009-03-24 20:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-24 20:25 Niel Lambrechts [this message]
2009-03-25 1:19 ` 2.6.29: EXT4: __ext4_get_inode_loc errors after s2disk Theodore Tso
2009-03-25 22:29 ` Pavel Machek
[not found] <cjlqb-7sp-1@gated-at.bofh.it>
[not found] ` <cjJLV-4jA-15@gated-at.bofh.it>
2009-03-25 22:43 ` Niel Lambrechts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C941D5.1000509@gmail.com \
--to=niel.lambrechts@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).