nvida sata controller CK804 and NCQ not working on linux-2.6.28||29.1

nvida sata controller CK804 and NCQ not working on linux-2.6.28||29.1

[l.genoni]

Hi,
to make NCQ work with nvidia sata CK804 I had to introduce this simple 
change into sata-nv.c. Is there some reason I am missing why adma_enable 
is not by default one, so later in the dome NCQ is not enabled?



--- linux/drivers/ata/sata_nv.c.old     2009-04-06 14:56:19.000000000 
+0200
+++ linux/drivers/ata/sata_nv.c 2009-04-06 14:56:24.000000000 +0200
@@ -577,7 +577,7 @@
  MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
  MODULE_VERSION(DRV_VERSION);

-static int adma_enabled;
+static int adma_enabled = 1;
  static int swncq_enabled = 1;

  static void nv_adma_register_mode(struct ata_port *ap)

regards

Luigi Genoni

Re: nvida sata controller CK804 and NCQ not working on linux-2.6.28||29.1

[Jeff Garzik]

l.genoni@oltrelinux.com wrote:
> 
> Hi,
> to make NCQ work with nvidia sata CK804 I had to introduce this simple 
> change into sata-nv.c. Is there some reason I am missing why adma_enable 
> is not by default one, so later in the dome NCQ is not enabled?

Yes -- too many problems in the field led us to disable ADMA by default.

	Jeff

Re: nvida sata controller CK804 and NCQ not working on linux-2.6.28||29.1

[Robert Hancock]

l.genoni@oltrelinux.com wrote:
> 
> Hi,
> to make NCQ work with nvidia sata CK804 I had to introduce this simple 
> change into sata-nv.c. Is there some reason I am missing why adma_enable 
> is not by default one, so later in the dome NCQ is not enabled?

It's had some problems with certain hotplug scenarios and seemingly 
others (like command timeouts) with different systems/drives. I use it 
on my system and it seems to work fine, but others have had some issues.

NVIDIA won't release any public register specs for this controller (the 
support there now was based on a partially finished version they 
released), and haven't been very helpful with debugging. I suspect some 
of the issues with it are related to hardware errata/bugs, which may 
partially explain their silence. There definitely are hardware bugs in 
this controller - just connect a SATA optical drive to it and try to 
read a scratched DVD with read errors. Even under Windows, with either 
NVIDIA's driver or the default Microsoft IDE driver, it'll usually 
either hardlock or machine-check blue screen the system. (It's known 
that the ATAPI part of ADMA is busted and unusable, but this happens 
with or without it enabled.)

> 
> 
> 
> --- linux/drivers/ata/sata_nv.c.old     2009-04-06 14:56:19.000000000 +0200
> +++ linux/drivers/ata/sata_nv.c 2009-04-06 14:56:24.000000000 +0200
> @@ -577,7 +577,7 @@
>  MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
>  MODULE_VERSION(DRV_VERSION);
> 
> -static int adma_enabled;
> +static int adma_enabled = 1;
>  static int swncq_enabled = 1;
> 
>  static void nv_adma_register_mode(struct ata_port *ap)
> 
> regards
> 
> Luigi Genoni

nvida sata controller CK804 and NCQ not working on linux-2.6.28||29.1

[Genoni Luigi]

Hi,
to make NCQ work with nvidia sata CK804 I had to introduce this simple
change into sata-nv.c. Is there some reason I am missing why adma_enable is
not by default one, so later in the dome NCQ is not enabled?



--- linux/drivers/ata/sata_nv.c.old     2009-04-06 14:56:19.000000000 +0200
+++ linux/drivers/ata/sata_nv.c 2009-04-06 14:56:24.000000000 +0200
@@ -577,7 +577,7 @@
 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);

-static int adma_enabled;
+static int adma_enabled = 1;
 static int swncq_enabled = 1;

 static void nv_adma_register_mode(struct ata_port *ap)

regards


Luigi Genoni

Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie.

This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks.

Re: nvida sata controller CK804 and NCQ not working on linux-2.6.28||29.1

[Tejun Heo]

Genoni Luigi wrote:
> Hi,
> to make NCQ work with nvidia sata CK804 I had to introduce this simple
> change into sata-nv.c. Is there some reason I am missing why adma_enable is
> not by default one, so later in the dome NCQ is not enabled?

You can simply use module parameter - sata_nv.adma=1.  It's disabled
by default because it's unstable on certain configurations.

Thanks.

-- 
tejun