From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>,
Rusty Russell <rusty@rustcorp.com.au>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: Gary Hade <garyhade@us.ibm.com>,
lcm@us.ibm.com, "Pallipadi,
Venkatesh" <venkatesh.pallipadi@intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/4] irq: only update affinity in chip set_affinity() -v3
Date: Tue, 14 Apr 2009 13:43:33 -0700 [thread overview]
Message-ID: <49E4F575.7060201@kernel.org> (raw)
In-Reply-To: <49E4F513.1060709@kernel.org>
Impact: keep affinity consistent
irq_set_affinity() and move_masked_irq() try to assign affinity
before calling chip set_affinity(). some archs are assigning again in set_affinity
again.
something like:
cpumask_cpy(desc->affinity, mask);
desc->chip->set_affinity(mask);
in the failing path, affinity should not be touched.
also set_extra_move_desc() ( called by set_affinity) will rely on the old
affinity to decide if need to move irq_desc to different node when logical
flat apic mode is used.
So try remove those assignment, and make some missed arch to assign affinity
in their set_affinity.
v2: update after "irq, x86: Remove IRQ_DISABLED check in process context IRQ move"
v3: according to Ingo, change set_affinity() in irq_chip to return int.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
kernel/irq/internals.h | 3 +++
kernel/irq/manage.c | 17 +++++++++++------
kernel/irq/migration.c | 14 +++++++++-----
3 files changed, 23 insertions(+), 11 deletions(-)
Index: linux-2.6/kernel/irq/internals.h
===================================================================
--- linux-2.6.orig/kernel/irq/internals.h
+++ linux-2.6/kernel/irq/internals.h
@@ -42,6 +42,9 @@ static inline void unregister_handler_pr
extern int irq_select_affinity_usr(unsigned int irq);
+extern void
+irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+
/*
* Debugging printout:
*/
Index: linux-2.6/kernel/irq/manage.c
===================================================================
--- linux-2.6.orig/kernel/irq/manage.c
+++ linux-2.6/kernel/irq/manage.c
@@ -80,7 +80,7 @@ int irq_can_set_affinity(unsigned int ir
return 1;
}
-static void
+void
irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
{
struct irqaction *action = desc->action;
@@ -109,17 +109,22 @@ int irq_set_affinity(unsigned int irq, c
spin_lock_irqsave(&desc->lock, flags);
#ifdef CONFIG_GENERIC_PENDING_IRQ
- if (desc->status & IRQ_MOVE_PCNTXT)
- desc->chip->set_affinity(irq, cpumask);
+ if (desc->status & IRQ_MOVE_PCNTXT) {
+ if (!desc->chip->set_affinity(irq, cpumask)) {
+ cpumask_copy(desc->affinity, cpumask);
+ irq_set_thread_affinity(desc, cpumask);
+ }
+ }
else {
desc->status |= IRQ_MOVE_PENDING;
cpumask_copy(desc->pending_mask, cpumask);
}
#else
- cpumask_copy(desc->affinity, cpumask);
- desc->chip->set_affinity(irq, cpumask);
+ if (!desc->chip->set_affinity(irq, cpumask)) {
+ cpumask_copy(desc->affinity, cpumask);
+ irq_set_thread_affinity(desc, cpumask);
+ }
#endif
- irq_set_thread_affinity(desc, cpumask);
desc->status |= IRQ_AFFINITY_SET;
spin_unlock_irqrestore(&desc->lock, flags);
return 0;
Index: linux-2.6/kernel/irq/migration.c
===================================================================
--- linux-2.6.orig/kernel/irq/migration.c
+++ linux-2.6/kernel/irq/migration.c
@@ -1,5 +1,8 @@
#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include "internals.h"
void move_masked_irq(int irq)
{
@@ -39,11 +42,12 @@ void move_masked_irq(int irq)
* masking the irqs.
*/
if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask)
- < nr_cpu_ids)) {
- cpumask_and(desc->affinity,
- desc->pending_mask, cpu_online_mask);
- desc->chip->set_affinity(irq, desc->affinity);
- }
+ < nr_cpu_ids))
+ if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
+ cpumask_copy(desc->affinity, desc->pending_mask);
+ irq_set_thread_affinity(desc, desc->pending_mask);
+ }
+
cpumask_clear(desc->pending_mask);
}
next prev parent reply other threads:[~2009-04-14 20:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200903231757.53709.rusty@rustcorp.com.au>
[not found] ` <20090323165921.GA7559@us.ibm.com>
[not found] ` <200903241553.58209.rusty@rustcorp.com.au>
[not found] ` <20090402013108.GB7103@us.ibm.com>
[not found] ` <20090404003520.GA8847@us.ibm.com>
[not found] ` <20090410215515.GC7242@us.ibm.com>
[not found] ` <20090411065510.GA11799@elte.hu>
[not found] ` <20090413220321.GA11098@us.ibm.com>
[not found] ` <49E4146C.7060507@kernel.org>
[not found] ` <49E4162A.3060701@kernel.org>
[not found] ` <20090414131711.GA4403@elte.hu>
2009-04-14 20:41 ` [PATCH 1/4] irq: correct CPUMASKS_OFFSTACK typo -v2 Yinghai Lu
2009-04-14 20:42 ` [PATCH 2/4] irq: make set_affinity to return status Yinghai Lu
2009-04-15 3:27 ` Rusty Russell
2009-04-15 5:44 ` [PATCH 2/4] irq: make set_affinity to return status -v2 Yinghai Lu
2009-04-14 20:43 ` Yinghai Lu [this message]
2009-04-14 20:44 ` [PATCH 4/4] irq: move move_irq_desc calling to set_affinity directly -v4 Yinghai Lu
2009-04-14 22:03 ` Suresh Siddha
2009-04-14 20:59 ` [PATCH 1/4] irq: correct CPUMASKS_OFFSTACK typo -v2 Andrew Morton
2009-04-15 10:01 ` Ingo Molnar
2009-04-15 19:17 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49E4F575.7060201@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=ebiederm@xmission.com \
--cc=garyhade@us.ibm.com \
--cc=hpa@zytor.com \
--cc=lcm@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
--cc=venkatesh.pallipadi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox