public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* ACPI / powernow-k8 problems with M4A78T-E (AM3) and 2.6.30-rc3
@ 2009-04-23 10:09 Ross Alexander
  2009-04-23 17:29 ` Ozan Çağlayan
       [not found] ` <alpine.LFD.2.00.0904231616480.15843@localhost.localdomain>
  0 siblings, 2 replies; 4+ messages in thread
From: Ross Alexander @ 2009-04-23 10:09 UTC (permalink / raw)
  To: linux-kernel@vger.kernel.org

[-- Attachment #1: Type: text/plain, Size: 2929 bytes --]

With BIOS version 0801 the powernow-k8 faulting.

------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1257 powernowk8_cpu_init+0
x4e0/0xd3f()
Hardware name: System Product Name
[Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a w
ay that Linux understands. Please report this to the Linux ACPI maintainers and
complain to your BIOS vendor.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.30-rc3 #2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/inpu
t2
Call Trace:
 [<ffffffff8023b28f>] ? warn_slowpath+0xdf/0x130
 [<ffffffff8038f91c>] ? acpi_get_handle+0x84/0xa8
 [<ffffffff8039c06f>] ? acpi_processor_register_performance+0x3ae/0x3d2
 [<ffffffff804e1227>] ? powernowk8_cpu_init+0x4e0/0xd3f
 [<ffffffff804e868e>] ? _spin_lock_irqsave+0x1e/0x50
 [<ffffffff8045c944>] ? cpufreq_add_dev+0x174/0x670
 [<ffffffff8023be8b>] ? vprintk+0x2bb/0x3f0
 [<ffffffff8023be95>] ? vprintk+0x2c5/0x3f0
 [<ffffffff80233ca0>] ? default_wake_function+0x0/0x20
 [<ffffffff8022fdb7>] ? task_rq_lock+0x47/0x90
 [<ffffffff804e88c2>] ? _spin_unlock_irqrestore+0x12/0x30
 [<ffffffff80236e33>] ? set_cpus_allowed_ptr+0x83/0x140
 [<ffffffff804e5964>] ? printk+0x40/0x4c
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
 [<ffffffff803c75c6>] ? sysdev_driver_register+0x96/0x120
 [<ffffffff804e0cc7>] ? powernowk8_init+0x0/0x80
 [<ffffffff8045b6bd>] ? cpufreq_register_driver+0xbd/0x1e0
 [<ffffffff8020904b>] ? do_one_initcall+0x3b/0x160
 [<ffffffff802f5ff8>] ? create_proc_entry+0x58/0xb0
 [<ffffffff80272aa0>] ? register_irq_proc+0xc0/0xe0
 [<ffffffff806b8658>] ? kernel_init+0x12b/0x181
 [<ffffffff8020c2aa>] ? child_rip+0xa/0x20
 [<ffffffff806b852d>] ? kernel_init+0x0/0x181
 [<ffffffff8020c2a0>] ? child_rip+0x0/0x20
---[ end trace f89681380ea72a15 ]---


Attached is the full dmesg and dmicode files.



Ross Alexander
SAP Basis
NEC Europe Ltd
Corporate IT Centre
Tel:     +44 20 8752 3394

IMPORTANT: The information contained in this e-mail and attachment (if any) is intended for the person to whom it is addressed and may contain confidential and/or privileged information. The contents of this message may contain personal views which are not the views of NEC Europe Ltd or its subsidiaries, unless specifically stated. You should not copy, retain, forward or disclose its contents to anyone else, or take any action based upon it, if it is not addressed to you personally.  If you have received this e-mail in error please contact the sender immediately. Any legally binding agreement resulting from its content must be made separately in a printed

NEC Europe Limited | Registered Office: NEC House, 1 Victoria Road, London W3 6BL | Registered in England 2832014


[-- Attachment #2: decode.txt --]
[-- Type: text/plain, Size: 19489 bytes --]

# dmidecode 2.10
SMBIOS 2.5 present.
65 structures occupying 2385 bytes.
Table at 0x000F06E0.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: American Megatrends Inc.
	Version: 0801   
	Release Date: 03/06/2009
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 1024 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		LS-120 boot is supported
		ATAPI Zip drive boot is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
	BIOS Revision: 8.15

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: System manufacturer
	Product Name: System Product Name
	Version: System Version
	Serial Number: System Serial Number
	UUID: 6014001E-8C00-01D4-20C5-00248C661322
	Wake-up Type: Power Switch
	SKU Number: To Be Filled By O.E.M.
	Family: To Be Filled By O.E.M.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
	Manufacturer: ASUSTeK Computer INC.
	Product Name: M4A78T-E
	Version: Rev 1.xx
	Serial Number: MS1C93BC2J01421
	Asset Tag: To Be Filled By O.E.M.
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis: To Be Filled By O.E.M.
	Chassis Handle: 0x0003
	Type: Motherboard
	Contained Object Handles: 0

Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
	Manufacturer: Chassis Manufacture
	Type: Desktop
	Lock: Not Present
	Version: Chassis Version
	Serial Number: Chassis Serial Number
	Asset Tag: Asset-1234567890
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00000001
	Height: Unspecified
	Number Of Power Cords: 1
	Contained Elements: 0

Handle 0x0004, DMI type 4, 40 bytes
Processor Information
	Socket Designation: AM3
	Type: Central Processor
	Family: Quad-Core Opteron
	Manufacturer: AMD              
	ID: 42 0F 10 00 FF FB 8B 17
	Signature: Family 16, Model 4, Stepping 2
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		HTT (Hyper-threading technology)
	Version: AMD Phenom(tm) II X4 810 Processor                  
	Voltage: 1.5 V
	External Clock: 200 MHz
	Max Speed: 2600 MHz
	Current Speed: 2600 MHz
	Status: Populated, Enabled
	Upgrade: Other
	L1 Cache Handle: 0x0005
	L2 Cache Handle: 0x0006
	L3 Cache Handle: 0x0007
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Part Number: To Be Filled By O.E.M.
	Core Count: 4
	Core Enabled: 4
	Characteristics:
		64-bit capable

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L1-Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 512 kB
	Maximum Size: 512 kB
	Supported SRAM Types:
		Pipeline Burst
	Installed SRAM Type: Pipeline Burst
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Data
	Associativity: 4-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L2-Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 2048 kB
	Maximum Size: 2048 kB
	Supported SRAM Types:
		Pipeline Burst
	Installed SRAM Type: Pipeline Burst
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 4-way Set-associative

Handle 0x0007, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L3-Cache
	Configuration: Enabled, Not Socketed, Level 3
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 4096 kB
	Maximum Size: 4096 kB
	Supported SRAM Types:
		Pipeline Burst
	Installed SRAM Type: Pipeline Burst
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 4-way Set-associative

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PS/2
	Internal Connector Type: None
	External Reference Designator: Keyboard
	External Connector Type: PS/2
	Port Type: Keyboard Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB12
	Internal Connector Type: None
	External Reference Designator: USB12
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB34
	Internal Connector Type: None
	External Reference Designator: USB34
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: On Board VGA
	Internal Connector Type: None
	External Reference Designator: On Board VGA
	External Connector Type: DB-15 female
	Port Type: Video Port

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LAN1
	Internal Connector Type: None
	External Reference Designator: LAN1
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SPDIF_O1
	Internal Connector Type: None
	External Reference Designator: SPDIF_O1
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: HDMI
	Internal Connector Type: None
	External Reference Designator: HDMI
	External Connector Type: Other
	Port Type: Audio Port

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Line In
	Internal Connector Type: None
	External Reference Designator: Line In
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Line Out
	Internal Connector Type: None
	External Reference Designator: Line Out
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Mic In
	Internal Connector Type: None
	External Reference Designator: Mic In
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Center Out
	Internal Connector Type: None
	External Reference Designator: Center Out
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Surround Out
	Internal Connector Type: None
	External Reference Designator: Surround Out
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Side Surround
	Internal Connector Type: None
	External Reference Designator: Side Surround Out
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: MAIN POWER
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CPU_FAN
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHA_FAN1
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHA_FAN2
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB56
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB78
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB910
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB1112
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA1
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA2
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA3
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA4
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA5
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: ESATA
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CDIN
	Internal Connector Type: On Board Sound Input From CD-ROM
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Audio Port

Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: AAFP
	Internal Connector Type: Mini Jack (headphones)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Audio Port

Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SPDIF_OUT
	Internal Connector Type: Mini Jack (headphones)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Audio Port

Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM1
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PRI_IDE
	Internal Connector Type: On Board IDE
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FLOPPY
	Internal Connector Type: On Board Floppy
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PANEL
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x002A, DMI type 9, 13 bytes
System Slot Information
	Designation: PCIEX16_1
	Type: x16 PCI Express
	Current Usage: Available
	Length: Short
	ID: 2
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported

Handle 0x002B, DMI type 9, 13 bytes
System Slot Information
	Designation: PCIEX16_2
	Type: x16 PCI Express
	Current Usage: Available
	Length: Short
	ID: 2
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported

Handle 0x002C, DMI type 9, 13 bytes
System Slot Information
	Designation: PCIEX1_1
	Type: x1 PCI Express
	Current Usage: Available
	Length: Short
	ID: 4
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported

Handle 0x002D, DMI type 9, 13 bytes
System Slot Information
	Designation: PCIEX1_2
	Type: x1 PCI Express
	Current Usage: Available
	Length: Short
	ID: 5
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported

Handle 0x002E, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI1
	Type: 32-bit PCI
	Current Usage: Available
	Length: Short
	ID: 13
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported

Handle 0x002F, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI2
	Type: 32-bit PCI
	Current Usage: Available
	Length: Short
	ID: 14
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported

Handle 0x0030, DMI type 10, 6 bytes
On Board Device Information
	Type: Video
	Status: Enabled
	Description:   To Be Filled By O.E.M.

Handle 0x0031, DMI type 11, 5 bytes
OEM Strings
	String 1: 00248C661322
	String 2: To Be Filled By O.E.M.
	String 3: To Be Filled By O.E.M.
	String 4: To Be Filled By O.E.M.

Handle 0x0032, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 1
		en|US|iso8859-1
	Currently Installed Language: en|US|iso8859-1

Handle 0x0033, DMI type 15, 35 bytes
System Event Log
	Area Length: 4 bytes
	Header Start Offset: 0x0000
	Header Length: 2 bytes
	Data Start Offset: 0x0002
	Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port
	Access Address: Index 0x046A, Data 0x046C
	Status: Invalid, Not Full
	Change Token: 0x00000000
	Header Format: No Header
	Supported Log Type Descriptors: 6
	Descriptor 1: End of log
	Data Format 1: OEM-specific
	Descriptor 2: End of log
	Data Format 2: OEM-specific
	Descriptor 3: End of log
	Data Format 3: OEM-specific
	Descriptor 4: End of log
	Data Format 4: OEM-specific
	Descriptor 5: End of log
	Data Format 5: OEM-specific
	Descriptor 6: End of log
	Data Format 6: OEM-specific

Handle 0x0034, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 8 GB
	Error Information Handle: Not Provided
	Number Of Devices: 4

Handle 0x0035, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0022FFFFFFF
	Range Size: 8960 MB
	Physical Array Handle: 0x0034
	Partition Width: 0

Handle 0x0036, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0034
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM0
	Bank Locator: BANK0
	Type: DDR
	Type Detail: Synchronous
	Speed: 1333 MHz
	Manufacturer: Manufacturer00
	Serial Number: SerNum00
	Asset Tag: AssetTagNum0
	Part Number: ModulePartNumber00

Handle 0x0037, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 2 GB
	Physical Device Handle: 0x0036
	Memory Array Mapped Address Handle: 0x0035
	Partition Row Position: 1

Handle 0x0038, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0034
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM1
	Bank Locator: BANK1
	Type: DDR
	Type Detail: Synchronous
	Speed: 1333 MHz
	Manufacturer: Manufacturer01
	Serial Number: SerNum01
	Asset Tag: AssetTagNum1
	Part Number: ModulePartNumber01

Handle 0x0039, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00080000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 2 GB
	Physical Device Handle: 0x0038
	Memory Array Mapped Address Handle: 0x0035
	Partition Row Position: 1

Handle 0x003A, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0034
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM2
	Bank Locator: BANK2
	Type: DDR
	Type Detail: Synchronous
	Speed: 1333 MHz
	Manufacturer: Manufacturer02
	Serial Number: SerNum02
	Asset Tag: AssetTagNum2
	Part Number: ModulePartNumber02

Handle 0x003B, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00100000000
	Ending Address: 0x0017FFFFFFF
	Range Size: 2 GB
	Physical Device Handle: 0x003A
	Memory Array Mapped Address Handle: 0x0035
	Partition Row Position: 1

Handle 0x003C, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0034
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM3
	Bank Locator: BANK3
	Type: DDR
	Type Detail: Synchronous
	Speed: 1333 MHz
	Manufacturer: Manufacturer03
	Serial Number: SerNum03
	Asset Tag: AssetTagNum3
	Part Number: ModulePartNumber03

Handle 0x003D, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00180000000
	Ending Address: 0x001FFFFFFFF
	Range Size: 2 GB
	Physical Device Handle: 0x003C
	Memory Array Mapped Address Handle: 0x0035
	Partition Row Position: 1

Handle 0x003E, DMI type 32, 20 bytes
System Boot Information
	Status: No errors detected

Handle 0x003F, DMI type 139, 94 bytes
OEM-specific Type
	Header and Data:
		8B 5E 3F 00 00 1E 8C 00 01 D4 20 C5 04 04 32 55
		F8 00 A2 02 A1 00 40 63 43 10 84 83 03 DF 40 80
		00 20 00 73 3C 10 08 00 60 0F 43 10 15 04 20 00
		3C 10 00 00 00 43 10 00 00 00 00 00 00 00 00 00
		00 00 00 00 C5 20 D4 FF FF 8C 1E 00 04 00 00 23
		33 00 00 00 00 00 00 00 00 00 00 00 00 01
	Strings:
		V1394GUID

Handle 0x0040, DMI type 127, 4 bytes
End Of Table


[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 51094 bytes --]

Linux version 2.6.30-rc3 (root@mig27) (gcc version 4.4.0 (GCC) ) #2 SMP PREEMPT Wed Apr 22 15:13:57 BST 2009
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-rc3 root=/dev/sda1 init=/sbin/init vga=773 ro
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
 BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
 BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
 BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x230000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0   00000000 mask FFFF80000000 write-back
  1 base 0   80000000 mask FFFFC0000000 write-back
  2 base 0   C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff90 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000cff90000
Using GB pages for direct mapping
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cfe00000 page 2M
 00cfe00000 - 00cff90000 page 4k
kernel direct mapping tables up to cff90000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000230000000
Using GB pages for direct mapping
 0100000000 - 0200000000 page 1G
 0200000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ 12000-14000
ACPI: RSDP 00000000000fb8b0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cff90000 00038 (v01 030609 RSDT1009 20090306 MSFT 00000097)
ACPI: FACP 00000000cff90200 00084 (v01 030609 FACP1009 20090306 MSFT 00000097)
ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20090320]
ACPI: DSDT 00000000cff90440 0D92C (v01  A1152 A1152000 00000000 INTL 20060113)
ACPI: FACS 00000000cffa8000 00040
ACPI: APIC 00000000cff90390 0006C (v01 030609 APIC1009 20090306 MSFT 00000097)
ACPI: MCFG 00000000cff90400 0003C (v01 030609 OEMMCFG  20090306 MSFT 00000097)
ACPI: OEMB 00000000cffa8040 00072 (v01 030609 OEMB1009 20090306 MSFT 00000097)
ACPI: HPET 00000000cff9f440 00038 (v01 030609 OEMHPET  20090306 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 0230000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00007bff58]    TEXT DATA BSS ==> [0000200000 - 00007bff58]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [00007c0000 - 00007c0290]              BRK ==> [00007c0000 - 00007c0290]
  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #6 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002fdfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000cff90
    0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096927
  DMA zone: 56 pages used for memmap
  DMA zone: 1573 pages reserved
  DMA zone: 2354 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833480 pages, LIFO batch:31
  Normal zone: 17024 pages used for memmap
  Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 24 pages at ffff880028034000, static data 67936 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063994
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-rc3 root=/dev/sda1 init=/sbin/init vga=773 ro
Initializing CPU#0
NR_IRQS:1280
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2609.088 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 8175388k/9175040k available (3006k kernel code, 787332k absent, 211372k reserved, 1535k data, 348k init)
hpet clockevent registered
HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5218.17 BogoMIPS (lpj=2609085)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 810 Processor stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5217.80 BogoMIPS (lpj=2608903)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 810 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5217.80 BogoMIPS (lpj=2608901)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 810 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5217.80 BogoMIPS (lpj=2608901)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 810 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (20871.58 BogoMIPS).
net_namespace: 592 bytes
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffefffff]
TOM2: 0000000230000000 aka 8960M
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [d0000000, dfffffff]
bus: 00 index 3 mmio: [f0000000, ffffffff]
bus: 00 index 4 mmio: [230000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E4, should be DB [20090320]
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xf7fffc00-0xf7ffffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10 32bit mmio: [0xf7ffd000-0xf7ffdfff]
pci 0000:00:12.1: reg 10 32bit mmio: [0xf7ffe000-0xf7ffefff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xf7fff800-0xf7fff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xf7ffb000-0xf7ffbfff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xf7ffc000-0xf7ffcfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xf7fff400-0xf7fff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xf7ff4000-0xf7ff7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xf7ffa000-0xf7ffafff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfbd80000-0xfbdfffff]
pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbdfffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfbec0000-0xfbefffff]
pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:06.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfff800-0xfbffffff]
pci 0000:03:00.0: reg 18 io port: [0xe800-0xe8ff]
pci 0000:03:00.0: supports D2
pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci 0000:00:14.4: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
pnp: PnP ACPI init
ACPI: bus type pnp registered
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc51 has been reserved
system 00:08: ioport range 0xc52-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd0-0xcd1 has been reserved
system 00:08: ioport range 0xcd2-0xcd3 has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0xb00-0xb3f has been reserved
system 00:08: ioport range 0x800-0x89f has been reserved
system 00:08: ioport range 0xb00-0xb0f has been reserved
system 00:08: ioport range 0xb20-0xb3f has been reserved
system 00:08: ioport range 0x900-0x90f has been reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0xfe00-0xfefe has been reserved
system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved
system 00:0c: ioport range 0x230-0x23f has been reserved
system 00:0c: ioport range 0x290-0x29f has been reserved
system 00:0c: ioport range 0xf40-0xf4f has been reserved
system 00:0c: ioport range 0xa30-0xa3f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff has been reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: 0xc000-0xcfff
pci 0000:00:02.0:   MEM window: 0xf8000000-0xfbdfffff
pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
pci 0000:00:06.0:   IO window: 0xd000-0xdfff
pci 0000:00:06.0:   MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:06.0:   PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0:   IO window: 0xe000-0xefff
pci 0000:00:07.0:   MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
pci 0000:00:14.4:   IO window: disabled
pci 0000:00:14.4:   MEM window: disabled
pci 0000:00:14.4:   PREFETCH window: disabled
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbdfffff]
pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 mem: [0x0-0x0]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 15969
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc20010100000, using 1536k, total 14336k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
processor ACPI_CPU:02: registered as cooling_device2
processor ACPI_CPU:03: registered as cooling_device3
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.SBRG.PSKE._STA] (Node ffff88022f854e10), AE_AML_ILLEGAL_ADDRESS
ACPI Error (hwvalid-0185): Denied AML access to port 0x(null)/1 (DMA 0x0000-0x000F) [20090320]
ACPI Exception (evregion-0422): AE_AML_ILLEGAL_ADDRESS, Returned by Handler for [SystemIO] [20090320]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.CFG_] (Node ffff88022f854f70), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.STA_] (Node ffff88022f854f30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
ACPI Error (uteval-0256): Method execution failed [\_SB_.PCI0.SBRG.PSMS._STA] (Node ffff88022f854d30), AE_AML_ILLEGAL_ADDRESS
Linux agpgart interface v0.103
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040 , connection status changed
ata2: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffe80 irq 22
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor processors (4 cpu cores) (version 2.20.00)
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1257 powernowk8_cpu_init+0x4e0/0xd3f()
Hardware name: System Product Name
[Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.30-rc3 #2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Call Trace:
 [<ffffffff8023b28f>] ? warn_slowpath+0xdf/0x130
 [<ffffffff8038f91c>] ? acpi_get_handle+0x84/0xa8
 [<ffffffff8039c06f>] ? acpi_processor_register_performance+0x3ae/0x3d2
 [<ffffffff804e1227>] ? powernowk8_cpu_init+0x4e0/0xd3f
 [<ffffffff804e868e>] ? _spin_lock_irqsave+0x1e/0x50
 [<ffffffff8045c944>] ? cpufreq_add_dev+0x174/0x670
 [<ffffffff8023be8b>] ? vprintk+0x2bb/0x3f0
 [<ffffffff8023be95>] ? vprintk+0x2c5/0x3f0
 [<ffffffff80233ca0>] ? default_wake_function+0x0/0x20
 [<ffffffff8022fdb7>] ? task_rq_lock+0x47/0x90
 [<ffffffff804e88c2>] ? _spin_unlock_irqrestore+0x12/0x30
 [<ffffffff80236e33>] ? set_cpus_allowed_ptr+0x83/0x140
 [<ffffffff804e5964>] ? printk+0x40/0x4c
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
 [<ffffffff803c75c6>] ? sysdev_driver_register+0x96/0x120
 [<ffffffff804e0cc7>] ? powernowk8_init+0x0/0x80
 [<ffffffff8045b6bd>] ? cpufreq_register_driver+0xbd/0x1e0
 [<ffffffff8020904b>] ? do_one_initcall+0x3b/0x160
 [<ffffffff802f5ff8>] ? create_proc_entry+0x58/0xb0
 [<ffffffff80272aa0>] ? register_irq_proc+0xc0/0xe0
 [<ffffffff806b8658>] ? kernel_init+0x12b/0x181
 [<ffffffff8020c2aa>] ? child_rip+0xa/0x20
 [<ffffffff806b852d>] ? kernel_init+0x0/0x181
 [<ffffffff8020c2a0>] ? child_rip+0x0/0x20
---[ end trace f89681380ea72a15 ]---
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: Optiarc DVD RW AD-7201S, 1.06, max UDMA/100
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/100
ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1: softreset failed (device not ready)
ata1: failed due to HW bug, retry pmp=0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6L200M0, BANC1G10, max UDMA/133
ata1.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<5>scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7201S  1.06 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sda1 sda2
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
 sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 2 and added 2 devices.
md: autorun ...
md: considering sdc1 ...
md:  adding sdc1 ...
md:  adding sdb1 ...
md: created md1
md: bind<sdb1>
md: bind<sdc1>
md: running: <sdc1><sdb1>
raid1: raid set md1 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 348k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
 md1: unknown partition table
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7fff800
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ffd000
ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ATL1E 0000:02:00.0: setting latency timer to 64
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7fff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ffe000
ohci1394 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394 0000:03:00.0: setting latency timer to 64
udev: renamed network interface eth0 to eth1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7ffb000
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fbfff800-fbffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ALSA sound/pci/hda/hda_intel.c:2267: chipset global capabilities = 0x4401
ALSA sound/pci/hda/hda_intel.c:788: codec_mask = 0x1
ALSA sound/pci/hda/hda_intel.c:1218: hda_intel: codec #0 probed OK
ALSA sound/pci/hda/hda_codec.c:3795: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0)
ALSA sound/pci/hda/hda_codec.c:3799:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3803:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3804:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3807:    dig-out=0x20/0x0
ALSA sound/pci/hda/hda_codec.c:3815:    inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x1f, aux=0x0
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7ffc000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7ffa000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-2: new low speed USB device using ohci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: HID 04d9:048e as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3
generic-usb 0003:04D9:048E.0001: input: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:12.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT3 FS on sda1, internal journal
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0001d420c5]
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
ATL1E 0000:02:00.0: ATL1E: eth1 NIC Link is Up<1000 Mbps Full Duplex>
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_intel.c:1491: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
warning: `pulseaudio' uses deprecated v2 capabilities in a way that may be insecure.
ALSA sound/pci/hda/hda_intel.c:1491: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1491: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x6, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1491: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x13, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_intel.c:1491: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x13, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x13
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x13
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x12
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_intel.c:1491: azx_pcm_prepare: bufsize=0x10000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x12
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
HDA Intel 0000:00:14.2: PCI INT A disabled
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ALSA sound/pci/hda/hda_codec.c:3795: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0)
ALSA sound/pci/hda/hda_codec.c:3799:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3803:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3804:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3807:    dig-out=0x20/0x0
ALSA sound/pci/hda/hda_codec.c:3815:    inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x1f, aux=0x0
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x12
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x12
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
nvidia: module license 'NVIDIA' taints kernel.
Disabling lockdep due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.51  Fri Apr 17 00:08:33 PDT 2009
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.51  Fri Apr 17 00:08:33 PDT 2009
IRQ 18/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x13, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x13, stream=0x1, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x12, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x24, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1029: hda_codec_setup_stream: NID=0x25, stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x13
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x13
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x12
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x10
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x11
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x24
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ALSA sound/pci/hda/hda_codec.c:1042: hda_codec_cleanup_stream: NID=0x25
ioctl32(gnome-terminal:14400): Unknown cmd fd(21) cmd(0000530b){t:'S';sz:0} arg(f75ef50a) on /dev/pts/0
ioctl32(gnome-terminal:14400): Unknown cmd fd(21) cmd(0000530b){t:'S';sz:0} arg(f75ef50f) on /dev/pts/0
ioctl32(gnome-terminal:14400): Unknown cmd fd(21) cmd(0000530b){t:'S';sz:0} arg(f75ef516) on /dev/pts/0

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2009-04-24  7:53 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-04-23 10:09 ACPI / powernow-k8 problems with M4A78T-E (AM3) and 2.6.30-rc3 Ross Alexander
2009-04-23 17:29 ` Ozan Çağlayan
     [not found] ` <alpine.LFD.2.00.0904231616480.15843@localhost.localdomain>
2009-04-24  3:35   ` Len Brown
2009-04-24  7:50     ` Ross Alexander

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox