linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Suresh Siddha <suresh.b.siddha@intel.com>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	Rusty Russell <rusty@rustcorp.com.au>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/9] x86/irq: remove NUMA_MIGRATE_IRQ_DESC -v2
Date: Mon, 27 Apr 2009 17:58:23 -0700	[thread overview]
Message-ID: <49F654AF.8000808@kernel.org> (raw)
In-Reply-To: <49E80305.8080200@kernel.org>


it causes crash on system with lots of cards with MSI-X
when irq_balancer enabled...

will have new patches that create irq_desc according to device numa node.

v2: still keep move_irq_desc, will use it later

Impact: it is not ready yet.remove it

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/Kconfig                  |   10 ------
 arch/x86/configs/x86_64_defconfig |    1 
 arch/x86/kernel/apic/io_apic.c    |   56 ++------------------------------------
 include/linux/irq.h               |   10 ------
 kernel/irq/Makefile               |    2 -
 kernel/irq/chip.c                 |   12 +-------
 kernel/irq/handle.c               |    9 +-----
 kernel/irq/numa_migrate.c         |    2 -
 8 files changed, 9 insertions(+), 93 deletions(-)

Index: linux-2.6/arch/x86/configs/x86_64_defconfig
===================================================================
--- linux-2.6.orig/arch/x86/configs/x86_64_defconfig
+++ linux-2.6/arch/x86/configs/x86_64_defconfig
@@ -195,7 +195,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_SPARSE_IRQ=y
-# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 # CONFIG_X86_ELAN is not set
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -149,9 +149,6 @@ struct irq_cfg {
 	unsigned move_cleanup_count;
 	u8 vector;
 	u8 move_in_progress : 1;
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-	u8 move_desc_pending : 1;
-#endif
 };
 
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
@@ -255,8 +252,7 @@ int arch_init_chip_data(struct irq_desc
 	return 0;
 }
 
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-
+/* for move_irq_desc */
 static void
 init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
 {
@@ -357,19 +353,7 @@ void arch_free_chip_data(struct irq_desc
 		old_desc->chip_data = NULL;
 	}
 }
-
-static void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg = desc->chip_data;
-
-	if (!cfg->move_in_progress) {
-		/* it means that domain is not changed */
-		if (!cpumask_intersects(desc->affinity, mask))
-			cfg->move_desc_pending = 1;
-	}
-}
-#endif
+/* end for move_irq_desc */
 
 #else
 static struct irq_cfg *irq_cfg(unsigned int irq)
@@ -379,13 +363,6 @@ static struct irq_cfg *irq_cfg(unsigned
 
 #endif
 
-#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
-static inline void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-}
-#endif
-
 struct io_apic {
 	unsigned int index;
 	unsigned int unused[3];
@@ -2302,9 +2279,6 @@ set_desc_affinity(struct irq_desc *desc,
 	if (assign_irq_vector(irq, cfg, mask))
 		return BAD_APICID;
 
-	/* check that before desc->addinity get updated */
-	set_extra_move_desc(desc, mask);
-
 	cpumask_copy(desc->affinity, mask);
 
 	return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
@@ -2373,8 +2347,6 @@ migrate_ioapic_irq_desc(struct irq_desc
 	if (assign_irq_vector(irq, cfg, mask))
 		return;
 
-	set_extra_move_desc(desc, mask);
-
 	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
 
 	irte.vector = cfg->vector;
@@ -2471,34 +2443,14 @@ static void irq_complete_move(struct irq
 	struct irq_cfg *cfg = desc->chip_data;
 	unsigned vector, me;
 
-	if (likely(!cfg->move_in_progress)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-		if (likely(!cfg->move_desc_pending))
-			return;
-
-		/* domain has not changed, but affinity did */
-		me = smp_processor_id();
-		if (cpumask_test_cpu(me, desc->affinity)) {
-			*descp = desc = move_irq_desc(desc, me);
-			/* get the new one */
-			cfg = desc->chip_data;
-			cfg->move_desc_pending = 0;
-		}
-#endif
+	if (likely(!cfg->move_in_progress))
 		return;
-	}
 
 	vector = ~get_irq_regs()->orig_ax;
 	me = smp_processor_id();
 
-	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-		*descp = desc = move_irq_desc(desc, me);
-		/* get the new one */
-		cfg = desc->chip_data;
-#endif
+	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 		send_cleanup_vector(cfg);
-	}
 }
 #else
 static inline void irq_complete_move(struct irq_desc **descp) {}
Index: linux-2.6/include/linux/irq.h
===================================================================
--- linux-2.6.orig/include/linux/irq.h
+++ linux-2.6/include/linux/irq.h
@@ -212,16 +212,6 @@ extern struct irq_desc *move_irq_desc(st
 
 extern struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu);
 
-static inline struct irq_desc *
-irq_remap_to_desc(unsigned int irq, struct irq_desc *desc)
-{
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-	return irq_to_desc(irq);
-#else
-	return desc;
-#endif
-}
-
 /*
  * Migration helpers for obsolete names, they will go away:
  */
Index: linux-2.6/kernel/irq/Makefile
===================================================================
--- linux-2.6.orig/kernel/irq/Makefile
+++ linux-2.6/kernel/irq/Makefile
@@ -3,5 +3,5 @@ obj-y := handle.o manage.o spurious.o re
 obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
-obj-$(CONFIG_NUMA_MIGRATE_IRQ_DESC) += numa_migrate.o
+obj-$(CONFIG_SPARSE_IRQ) += numa_migrate.o
 obj-$(CONFIG_PM_SLEEP) += pm.o
Index: linux-2.6/kernel/irq/chip.c
===================================================================
--- linux-2.6.orig/kernel/irq/chip.c
+++ linux-2.6/kernel/irq/chip.c
@@ -359,7 +359,6 @@ handle_level_irq(unsigned int irq, struc
 
 	spin_lock(&desc->lock);
 	mask_ack_irq(desc, irq);
-	desc = irq_remap_to_desc(irq, desc);
 
 	if (unlikely(desc->status & IRQ_INPROGRESS))
 		goto out_unlock;
@@ -438,7 +437,6 @@ handle_fasteoi_irq(unsigned int irq, str
 	desc->status &= ~IRQ_INPROGRESS;
 out:
 	desc->chip->eoi(irq);
-	desc = irq_remap_to_desc(irq, desc);
 
 	spin_unlock(&desc->lock);
 }
@@ -475,7 +473,6 @@ handle_edge_irq(unsigned int irq, struct
 		    !desc->action)) {
 		desc->status |= (IRQ_PENDING | IRQ_MASKED);
 		mask_ack_irq(desc, irq);
-		desc = irq_remap_to_desc(irq, desc);
 		goto out_unlock;
 	}
 	kstat_incr_irqs_this_cpu(irq, desc);
@@ -483,7 +480,6 @@ handle_edge_irq(unsigned int irq, struct
 	/* Start handling the irq */
 	if (desc->chip->ack)
 		desc->chip->ack(irq);
-	desc = irq_remap_to_desc(irq, desc);
 
 	/* Mark the IRQ currently in progress.*/
 	desc->status |= IRQ_INPROGRESS;
@@ -544,10 +540,8 @@ handle_percpu_irq(unsigned int irq, stru
 	if (!noirqdebug)
 		note_interrupt(irq, desc, action_ret);
 
-	if (desc->chip->eoi) {
+	if (desc->chip->eoi)
 		desc->chip->eoi(irq);
-		desc = irq_remap_to_desc(irq, desc);
-	}
 }
 
 void
@@ -582,10 +576,8 @@ __set_irq_handler(unsigned int irq, irq_
 
 	/* Uninstall? */
 	if (handle == handle_bad_irq) {
-		if (desc->chip != &no_irq_chip) {
+		if (desc->chip != &no_irq_chip)
 			mask_ack_irq(desc, irq);
-			desc = irq_remap_to_desc(irq, desc);
-		}
 		desc->status |= IRQ_DISABLED;
 		desc->depth = 1;
 	}
Index: linux-2.6/kernel/irq/handle.c
===================================================================
--- linux-2.6.orig/kernel/irq/handle.c
+++ linux-2.6/kernel/irq/handle.c
@@ -457,11 +457,8 @@ unsigned int __do_IRQ(unsigned int irq)
 		/*
 		 * No locking required for CPU-local interrupts:
 		 */
-		if (desc->chip->ack) {
+		if (desc->chip->ack)
 			desc->chip->ack(irq);
-			/* get new one */
-			desc = irq_remap_to_desc(irq, desc);
-		}
 		if (likely(!(desc->status & IRQ_DISABLED))) {
 			action_ret = handle_IRQ_event(irq, desc->action);
 			if (!noirqdebug)
@@ -472,10 +469,8 @@ unsigned int __do_IRQ(unsigned int irq)
 	}
 
 	spin_lock(&desc->lock);
-	if (desc->chip->ack) {
+	if (desc->chip->ack)
 		desc->chip->ack(irq);
-		desc = irq_remap_to_desc(irq, desc);
-	}
 	/*
 	 * REPLAY is when Linux resends an IRQ that was dropped earlier
 	 * WAITING is used by probe to mark irqs that are being tested
Index: linux-2.6/arch/x86/Kconfig
===================================================================
--- linux-2.6.orig/arch/x86/Kconfig
+++ linux-2.6/arch/x86/Kconfig
@@ -280,16 +280,6 @@ config SPARSE_IRQ
 
 	  If you don't know what to do here, say N.
 
-config NUMA_MIGRATE_IRQ_DESC
-	bool "Move irq desc when changing irq smp_affinity"
-	depends on SPARSE_IRQ && NUMA
-	depends on BROKEN
-	default n
-	---help---
-	  This enables moving irq_desc to cpu/node that irq will use handled.
-
-	  If you don't know what to do here, say N.
-
 config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
 	default y
Index: linux-2.6/kernel/irq/numa_migrate.c
===================================================================
--- linux-2.6.orig/kernel/irq/numa_migrate.c
+++ linux-2.6/kernel/irq/numa_migrate.c
@@ -97,9 +97,7 @@ static struct irq_desc *__real_move_irq_
 
 	/* free the old one */
 	free_one_irq_desc(old_desc, desc);
-	spin_unlock(&old_desc->lock);
 	kfree(old_desc);
-	spin_lock(&desc->lock);
 
 	return desc;
 

  reply	other threads:[~2009-04-28  1:00 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-16  1:39 [PATCH 1/8] x86/irq: remove NUMA_MIGRATIE_IRQ_DESC Yinghai Lu
2009-04-16  1:40 ` [PATCH 2/8] irq: correct CPUMASKS_OFFSTACK typo -v3 Yinghai Lu
2009-04-16  1:41 ` [PATCH 3/8] irq: make set_affinity to return status -v2 Yinghai Lu
2009-04-16  9:08   ` Ingo Molnar
2009-04-16  9:17     ` Joe Perches
2009-04-16  9:25       ` Ingo Molnar
2009-04-16  1:41 ` [PATCH 4/8] irq: only update affinity in chip set_affinity() -v3 Yinghai Lu
2009-04-16 23:25   ` Suresh Siddha
2009-04-17  1:58     ` Yinghai Lu
2009-04-16  1:42 ` [PATCH 5/8] irq: change irq_desc_alloc to take node instead cpu Yinghai Lu
2009-04-16  9:10   ` Ingo Molnar
2009-04-16  1:43 ` [PATCH 6/8] irq: make io_apic_set_pci_routing to take device Yinghai Lu
2009-04-16  9:16   ` Ingo Molnar
2009-04-16  1:44 ` [PATCH 7/8] x86/irq: make MSI irq_desc numa aware Yinghai Lu
2009-04-16  9:18   ` Ingo Molnar
2009-04-16  1:44 ` [PATCH 8/8] irq: make ht " Yinghai Lu
2009-04-16  9:21   ` Ingo Molnar
2009-04-16 23:34     ` Suresh Siddha
2009-04-16  9:03 ` [PATCH 1/8] x86/irq: remove NUMA_MIGRATIE_IRQ_DESC Ingo Molnar
2009-04-17  4:17   ` [PATCH 1/9] x86/irq: remove NUMA_MIGRATE_IRQ_DESC Yinghai Lu
2009-04-17  4:18     ` [PATCH 2/9] irq: correct CPUMASKS_OFFSTACK typo -v4 Yinghai Lu
2009-04-28  0:58       ` Yinghai Lu [this message]
2009-05-01 17:06         ` [tip:irq/numa] x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESC tip-bot for Yinghai Lu
2009-04-17  4:19     ` [PATCH 3/9] irq: make set_affinity to return status -v2 Yinghai Lu
2009-04-28  0:59       ` Yinghai Lu
2009-05-01 17:06         ` [tip:irq/numa] irq: change ->set_affinity() to return status tip-bot for Yinghai Lu
2009-05-06  6:55         ` [tip:irq/numa] irq: change ->set_affinity() to return status, fix tip-bot for Ingo Molnar
2009-04-17  4:20     ` [PATCH 4/9] irq: only update affinity if set_affinity() sucessfully -v4 Yinghai Lu
2009-04-28  0:59       ` Yinghai Lu
2009-05-01 17:07         ` [tip:irq/numa] irq: only update affinity if ->set_affinity() is sucessfull tip-bot for Yinghai Lu
2009-04-17  4:21     ` [PATCH 5/9] x86/irq: change irq_desc_alloc to take node instead cpu Yinghai Lu
2009-04-28  1:00       ` [PATCH 5/9] x86/irq: change irq_desc_alloc to take node instead cpu -v2 Yinghai Lu
2009-05-01 17:07         ` [tip:irq/numa] x86/irq: change irq_desc_alloc() to take node instead of cpu tip-bot for Yinghai Lu
2009-04-17  4:23     ` [PATCH 6/9] irq: make io_apic_set_pci_routing to take device Yinghai Lu
2009-04-23  4:42       ` Len Brown
2009-04-26 21:53         ` [PATCH] x86/acpi: remove compress irq trick for 32bit Yinghai Lu
2009-04-26 21:55           ` [PATCH] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi Yinghai Lu
2009-04-26 23:25             ` Yinghai Lu
2009-04-27  1:12             ` [PATCH] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2 Yinghai Lu
2009-04-27  3:30           ` [PATCH] x86/acpi: remove compress irq trick for 32bit Ingo Molnar
2009-05-14 15:41           ` Len Brown
2009-05-15 13:06             ` Ingo Molnar
2009-04-28  1:01       ` [PATCH 6/9] irq: make io_apic_set_pci_routing to take device Yinghai Lu
2009-05-01 17:07         ` [tip:irq/numa] irq: change ACPI GSI APIs to also take a device argument tip-bot for Yinghai Lu
2009-04-17  4:24     ` [PATCH 7/9] irq: make io_apic_set_pci_routing to use device Yinghai Lu
2009-04-28  1:01       ` Yinghai Lu
2009-05-01 17:07         ` [tip:irq/numa] irq: change io_apic_set_pci_routing() to use device parameter tip-bot for Yinghai Lu
2009-04-17  4:25     ` [PATCH 8/9] x86/irq: make MSI irq_desc numa aware Yinghai Lu
2009-04-27  3:26       ` [PATCH 8/9] x86/irq: make MSI irq_desc numa aware -v2 Yinghai Lu
2009-04-28  1:02       ` [PATCH 8/9] x86/irq: make MSI irq_desc numa aware -v3 Yinghai Lu
2009-04-28 10:14         ` Ingo Molnar
2009-04-28 14:17           ` Yinghai Lu
2009-04-28 14:32             ` Ingo Molnar
2009-04-28 19:07               ` Yinghai Lu
2009-04-29 12:00                 ` Ingo Molnar
2009-04-29 16:27                   ` [PATCH] x86/irq: using move_irq_desc Yinghai Lu
2009-04-29 20:41                     ` Ingo Molnar
2009-04-29 21:23                       ` Ingo Molnar
2009-04-29 21:55                         ` Yinghai Lu
2009-04-29 23:25                         ` Yinghai Lu
2009-04-30  7:29                           ` Ingo Molnar
2009-04-30  8:17                             ` [PATCH] x86/irq: using move_irq_desc -v3 Yinghai Lu
2009-05-01 17:08                               ` [tip:irq/numa] x86/irq: use move_irq_desc() in create_irq_nr() tip-bot for Yinghai Lu
2009-04-28 21:41               ` [PATCH] x86/irq: use move_irq_desc only when CONFIG_NUMA_IRQ_DESC is set Yinghai Lu
2009-05-01 17:07         ` [tip:irq/numa] x86/irq: change MSI irq_desc to be more numa aware tip-bot for Yinghai Lu
2009-04-17  4:25     ` [PATCH 9/9] irq: make ht irq_desc " Yinghai Lu
2009-04-28  1:02       ` Yinghai Lu
2009-04-28 10:19         ` Ingo Molnar
2009-04-28 16:28           ` Jesse Barnes
2009-04-28 16:28           ` Jesse Barnes
2009-05-01 17:07         ` [tip:irq/numa] irq: make ht irq_desc more " tip-bot for Yinghai Lu
2009-04-17 13:49     ` [PATCH 1/9] x86/irq: remove NUMA_MIGRATE_IRQ_DESC Ingo Molnar
2009-04-28  0:57     ` [PATCH 1/9] irq: correct CPUMASKS_OFFSTACK typo -v5 Yinghai Lu
2009-05-01 17:06       ` [tip:irq/numa] irq, cpumask: correct CPUMASKS_OFFSTACK typo and fix fallout tip-bot for Yinghai Lu
2009-04-17  1:00 ` [tip:irq/urgent] x86/irq: mark NUMA_MIGRATIE_IRQ_DESC broken tip-bot for Yinghai Lu
2009-04-17  1:21 ` [tip:irq/urgent] x86/irq: mark NUMA_MIGRATE_IRQ_DESC broken tip-bot for Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49F654AF.8000808@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=ebiederm@xmission.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=rusty@rustcorp.com.au \
    --cc=suresh.b.siddha@intel.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).