From: Eric Dumazet <dada1@cosmosbay.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Gallatin <gallatin@myri.com>,
linux-kernel@vger.kernel.org, rick.jones2@hp.com, brice@myri.com,
Paul Mackerras <paulus@samba.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Martin Schwidefsky <schwidefsky@de.ibm.com>,
Ingo Molnar <mingo@elte.hu>
Subject: Re: IRQ / SoftIRQ CPU time accounting broken by 457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4
Date: Wed, 29 Apr 2009 07:01:56 +0200 [thread overview]
Message-ID: <49F7DF44.8090907@cosmosbay.com> (raw)
In-Reply-To: <20090428163004.46733752.akpm@linux-foundation.org>
Andrew Morton a écrit :
> (cc's added)
>
> On Thu, 23 Apr 2009 10:19:38 -0400
> Andrew Gallatin <gallatin@myri.com> wrote:
>
>> When running netperf for some 10GbE tests, I noticed
>> that IRQ and SOFTIRQ CPU time is no longer reported for an
>> otherwise idle CPU on recent kernels, at least for x86_64.
>>
>> If I take a 2-CPU system, and bind the NIC IRQ to CPU0, and
>> bind the user-space netserver daemon to CPU1, the problem
>> is obvious when blasting 10Gb/s of traffic at it. I see
>> no CPU used for irq or softirq on CPU0, even though it is
>> handling 13K interrupts/sec:
>>
>>
>>
>> % mpstat -P 0 1
>> Linux 2.6.30-rc1 (venice) 04/22/09
>>
>> 11:25:25 CPU %user %nice %system %iowait %irq %soft %idle
>> intr/s
>> 11:25:26 0 0.00 0.00 0.00 0.00 0.00 0.00 100.00
>> 13248.00
>> 11:25:27 0 0.00 0.00 0.00 0.00 0.00 0.00 100.00
>> 13280.00
>>
>> Common sense tells me that is wrong, and oprofile verifies there is
>> a lot happening on CPU0. Further, when I run a cpu-soaker in
>> usermode bound to CPU0, I start to see irq, softirq, etc,
>> being correctly identified:
>>
>> 11:28:02 CPU %user %nice %system %iowait %irq %soft %idle
>> intr/s
>> 11:28:03 0 45.10 0.00 0.00 0.00 1.96 52.94 0.00
>> 13019.61
>> 11:28:04 0 46.46 0.00 0.00 0.00 2.02 51.52 0.00
>> 13414.14
>>
>> The problem is observable, but much less obvious when using a more
>> common, e1000 1GbE NIC (15% softirq is missing, rather than 50%).
>>
>> I spent a few hours git-bisecting until I finally got here:
>>
>> % git-bisect bad
>> Bisecting: 0 revisions left to test after this
>> [457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4] fix scaled & unscaled cputime
>> accounting
>>
>> I have neither CONFIG_NO_HZ, CONFIG_VIRT_CPU_ACCOUNTING, or XEN configured.
>>
>
> Thanks for doing the bisection.
>
> 457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4 was merged late last year, so
> this regression has been around for a while.
>
> We might have fixed it in more recent kernels - stranger things have
> happened ;)
>
Same problem here on 32 bit current git kernel, 8 cpus machine.
Easily reproductible with a ping flood, NIC interrupts bonded to CPU0
Cpu0 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 396260 474568 2881560 0 0 0 4 43642 2859 0 0 100 0
0 0 0 396260 474568 2881560 0 0 0 0 55802 2840 0 0 100 0
0 0 0 396260 474576 2881560 0 0 0 4 51239 2861 0 0 100 0
0 0 0 396260 474576 2881560 0 0 0 0 47848 2847 0 0 100 0
0 0 0 396260 474576 2881560 0 0 0 4 54245 2841 0 0 100 0
0 0 0 396260 474576 2881560 0 0 0 0 46500 2851 0 0 100 0
0 0 0 396260 474576 2881560 0 0 0 4 48035 2839 0 0 100 0
0 0 0 396136 474580 2881560 0 0 0 0 41994 2855 0 0 100 0
0 0 0 396136 474580 2881560 0 0 0 4 46701 2842 0 0 100 0
If load is large enough to trigger ksoftirqd, then softirq time is correctly reported.
Cpu0 : 0.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi,100.0%si, 0.0%st
CONFIG_GENERIC_TIME=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_KTIME_SCALAR=y
CONFIG_TIMERFD=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HPET_TIMER=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_X86_PM_TIMER=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_PRINTK_TIME=y
CONFIG_TIMER_STATS=y
ping flood received on eth0 / eth1 interfaces (PCI-MSI-edge IRQS)
$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 343 0 0 0 0 0 0 0 IO-APIC-edge timer
1: 1 0 1 0 0 0 0 0 IO-APIC-edge i8042
9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi
12: 0 0 0 1 1 1 1 1 IO-APIC-edge i8042
14: 0 0 0 0 0 0 0 0 IO-APIC-edge ide0
15: 0 0 0 0 0 0 0 0 IO-APIC-edge ide1
16: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb1
17: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2
18: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3
19: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4
22: 12 10 13 9 14 14 14 8 IO-APIC-fasteoi uhci_hcd:usb5
33: 109191 165558 162520 156506 160469 161549 162655 161780 PCI-MSI-edge cciss0
34: 91628623 0 0 0 0 0 0 0 PCI-MSI-edge eth1
36: 18517783 0 0 0 0 0 0 0 PCI-MSI-edge eth0
NMI: 227238100 165960221 154895362 165425712 111786333 116776935 114633666 111315114 Non-maskable interrupts
LOC: 88434578 80673549 73277767 78134420 77183920 71046805 68905716 70869751 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
RES: 16425 216454 73793 347021 125963 30655 47623 31300 Rescheduling interrupts
CAL: 13164 13182 13184 13175 100 13169 13151 13163 Function call interrupts
TLB: 45488 52740 50498 53806 57548 54933 58091 56249 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
commit 79741dd35713ff4f6fd0eafd59fa94e8a4ba922d did :
void account_process_tick(struct task_struct *p, int user_tick)
{
cputime_t one_jiffy = jiffies_to_cputime(1);
cputime_t one_jiffy_scaled = cputime_to_scaled(one_jiffy);
struct rq *rq = this_rq();
if (user_tick)
account_user_time(p, one_jiffy, one_jiffy_scaled);
else if (p != rq->idle)
account_system_time(p, HARDIRQ_OFFSET, one_jiffy,
one_jiffy_scaled);
else
account_idle_time(one_jiffy);
}
So, if IRQs are interrupting idle task, I guess if (p != rq->idle) will be false.
next prev parent reply other threads:[~2009-04-29 5:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-23 14:19 IRQ / SoftIRQ CPU time accounting broken by 457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4 Andrew Gallatin
2009-04-28 23:30 ` Andrew Morton
2009-04-29 5:01 ` Eric Dumazet [this message]
2009-04-29 7:46 ` [PATCH] sched: account system time properly Eric Dumazet
2009-04-29 8:08 ` Martin Schwidefsky
2009-04-29 9:20 ` Eric Dumazet
2009-04-29 9:48 ` Martin Schwidefsky
2009-04-29 10:24 ` Ingo Molnar
2009-04-29 12:44 ` Eric Dumazet
2009-04-29 13:09 ` [tip:sched/urgent] " tip-bot for Eric Dumazet
2009-04-29 14:58 ` Andrew Morton
2009-04-29 19:06 ` Ingo Molnar
2009-04-29 13:23 ` [PATCH] " Andrew Gallatin
2009-04-29 8:02 ` IRQ / SoftIRQ CPU time accounting broken by 457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4 Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49F7DF44.8090907@cosmosbay.com \
--to=dada1@cosmosbay.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=brice@myri.com \
--cc=gallatin@myri.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=paulus@samba.org \
--cc=rick.jones2@hp.com \
--cc=schwidefsky@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox