ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin Mattock]

I've been trying to diagnose an issue
with 2.6.30-rc4. At first thinking it
was not the kernel, but the network manager
(in my case I use wicd).
with 2.6.29-rc8 the system starts up,
connects no problem.
but as soon as I load 2.6.30-rc4
I get limited connection to none.
in dmesg I see:

[   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
[   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out

The type of encryption used is just
a standard WEP key(no WPA).

has this been resolved already?

Also I'm noticing(but not that big of a deal)
if I set in sysctl.conf:

net.ipv4.conf.all.arp_ignore=8
net.ipv4.conf.wlan0.arp_ignore=8
net.ipv4.conf.wmaster0.arp_ignore=8
net.ipv4.conf.lo.arp_ignore=8
net.ipv4.conf.all.arp_announce=2
net.ipv4.conf.wlan0.arp_announce=2
net.ipv4.conf.wmaster0.arp_announce=2
net.ipv4.conf.lo.arp_announce=2

watching a movie on hulu, about 15/20 minuets
into enjoyment, hulu craps out(starts re-buffering)
then re initializes after about 30 secs later.
but if I comment those out(set back to default)
hulu will run fine.

-- 
Justin P. Mattock

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Jiri Slaby]

Adding some CCs.

On 05/11/2009 07:02 PM, Justin Mattock wrote:
> I've been trying to diagnose an issue
> with 2.6.30-rc4. At first thinking it
> was not the kernel, but the network manager
> (in my case I use wicd).
> with 2.6.29-rc8 the system starts up,
> connects no problem.
> but as soon as I load 2.6.30-rc4
> I get limited connection to none.
> in dmesg I see:
> 
> [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> 
> The type of encryption used is just
> a standard WEP key(no WPA).
> 
> has this been resolved already?
> 
> Also I'm noticing(but not that big of a deal)
> if I set in sysctl.conf:
> 
> net.ipv4.conf.all.arp_ignore=8
> net.ipv4.conf.wlan0.arp_ignore=8
> net.ipv4.conf.wmaster0.arp_ignore=8
> net.ipv4.conf.lo.arp_ignore=8
> net.ipv4.conf.all.arp_announce=2
> net.ipv4.conf.wlan0.arp_announce=2
> net.ipv4.conf.wmaster0.arp_announce=2
> net.ipv4.conf.lo.arp_announce=2
> 
> watching a movie on hulu, about 15/20 minuets
> into enjoyment, hulu craps out(starts re-buffering)
> then re initializes after about 30 secs later.
> but if I comment those out(set back to default)
> hulu will run fine.
> 

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin P. Mattock]

On Mon, 2009-05-11 at 23:53 +0200, Jiri Slaby wrote:
> Adding some CCs.
> 
> On 05/11/2009 07:02 PM, Justin Mattock wrote:
> > I've been trying to diagnose an issue
> > with 2.6.30-rc4. At first thinking it
> > was not the kernel, but the network manager
> > (in my case I use wicd).
> > with 2.6.29-rc8 the system starts up,
> > connects no problem.
> > but as soon as I load 2.6.30-rc4
> > I get limited connection to none.
> > in dmesg I see:
> > 
> > [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > 
> > The type of encryption used is just
> > a standard WEP key(no WPA).
> > 
> > has this been resolved already?
> > 
> > Also I'm noticing(but not that big of a deal)
> > if I set in sysctl.conf:
> > 
> > net.ipv4.conf.all.arp_ignore=8
> > net.ipv4.conf.wlan0.arp_ignore=8
> > net.ipv4.conf.wmaster0.arp_ignore=8
> > net.ipv4.conf.lo.arp_ignore=8
> > net.ipv4.conf.all.arp_announce=2
> > net.ipv4.conf.wlan0.arp_announce=2
> > net.ipv4.conf.wmaster0.arp_announce=2
> > net.ipv4.conf.lo.arp_announce=2
> > 
> > watching a movie on hulu, about 15/20 minuets
> > into enjoyment, hulu craps out(starts re-buffering)
> > then re initializes after about 30 secs later.
> > but if I comment those out(set back to default)
> > hulu will run fine.
> > 
> 

Cool.
Another odd thing Ive experienced as well
with 2.6.29-rc8 is if my iphone is
connected to the router I'll have a hard time connecting
to anything until I disconnect the iphone
from the router.(my guess is the router is getting
old).

regards,

Justin P. Mattock

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Bob Copeland]

On Mon, May 11, 2009 at 6:18 PM, Justin P. Mattock
<justinmattock@gmail.com> wrote:
> Cool.
> Another odd thing Ive experienced as well
> with 2.6.29-rc8 is if my iphone is
> connected to the router I'll have a hard time connecting
> to anything until I disconnect the iphone
> from the router.(my guess is the router is getting
> old).

So the iphone causes problems when connecting from another machine
with ath9k, but it works ok in other kernels, or when iphone is not
connected?  It could be related to power saving.

-- 
Bob Copeland %% www.bobcopeland.com

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin Mattock]

On Tue, May 12, 2009 at 8:03 AM, Bob Copeland <bcopeland@gmail.com> wrote:
> On Mon, May 11, 2009 at 6:18 PM, Justin P. Mattock
> <justinmattock@gmail.com> wrote:
>> Cool.
>> Another odd thing Ive experienced as well
>> with 2.6.29-rc8 is if my iphone is
>> connected to the router I'll have a hard time connecting
>> to anything until I disconnect the iphone
>> from the router.(my guess is the router is getting
>> old).
>
> So the iphone causes problems when connecting from another machine
> with ath9k, but it works ok in other kernels, or when iphone is not
> connected?  It could be related to power saving.
>
> --
> Bob Copeland %% www.bobcopeland.com
>

The setup I have is one router(netgear cheap but
works)
with macbook pro, imac, and an iphone. I guess I'm an
apple groupie, minus the OS!!
(two dells also, that I'm going to bring back from the
dead when I get a chance).

With 2.6.29-rc8 I've noticed this twice
the first time about a month ago.
basically I turned on the macbook
had the radio streaming, as well as T.V.
then a few seconds later all connections
died on the macbook, then after freaking
out I decided to reset the router, but still
system runs(macbook) and then everything
dies. Then freaking out for the second time,
I decided to shut everything off of the router
except the macbook, and voila no problem streaming.
Then after about ten minuets of non interruption
I turned the iphone wireless back on, and bam
the macbook had a dead connection again.
(leaving me dazed and confused, and that's without
any liquid propulsion).
The second time with the same kernel
was about a few days ago, but this time
after resetting the router, shutting everything
off except the macbook, and then turning the
iphone back on seemed to run fine.(leading me
to believe something might be wrong with the
router).

As for 2.6.30-rc4 not sure, still need to
get the wireless running smoothly, and then
I'll go from there.


-- 
Justin P. Mattock

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Luis R. Rodriguez]

On Mon, May 11, 2009 at 2:53 PM, Jiri Slaby <jirislaby@gmail.com> wrote:
> Adding some CCs.
>
> On 05/11/2009 07:02 PM, Justin Mattock wrote:
>> I've been trying to diagnose an issue
>> with 2.6.30-rc4. At first thinking it
>> was not the kernel, but the network manager
>> (in my case I use wicd).
>> with 2.6.29-rc8 the system starts up,
>> connects no problem.
>> but as soon as I load 2.6.30-rc4
>> I get limited connection to none.
>> in dmesg I see:
>>
>> [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
>> [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
>> [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
>> [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
>> [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
>> [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
>> [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
>> [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
>>
>> The type of encryption used is just
>> a standard WEP key(no WPA).
>>
>> has this been resolved already?

Can you provide more details, like the AP you used, and card you have?
(dmesg log would be nice).

  Luis

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin Mattock]

[-- Attachment #1: Type: text/plain, Size: 1664 bytes --]

On Mon, May 11, 2009 at 3:24 PM, Luis R. Rodriguez <mcgrof@gmail.com> wrote:
> On Mon, May 11, 2009 at 2:53 PM, Jiri Slaby <jirislaby@gmail.com> wrote:
>> Adding some CCs.
>>
>> On 05/11/2009 07:02 PM, Justin Mattock wrote:
>>> I've been trying to diagnose an issue
>>> with 2.6.30-rc4. At first thinking it
>>> was not the kernel, but the network manager
>>> (in my case I use wicd).
>>> with 2.6.29-rc8 the system starts up,
>>> connects no problem.
>>> but as soon as I load 2.6.30-rc4
>>> I get limited connection to none.
>>> in dmesg I see:
>>>
>>> [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
>>> [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
>>> [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
>>> [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
>>> [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
>>> [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
>>> [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
>>> [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
>>>
>>> The type of encryption used is just
>>> a standard WEP key(no WPA).
>>>
>>> has this been resolved already?
>
> Can you provide more details, like the AP you used, and card you have?
> (dmesg log would be nice).
>
>  Luis
>

The AP I use is a
netgear 54g(cheap 40 dollar router from
bestbuy)

attached is dmesg and lspci
disregard the kernel commits
2.6.30-rc4-00004-gfb422e6
(those are from the bluetooth patches a few
days ago) without them the kernel is at
2.6.30-rc4.


-- 
Justin P. Mattock

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 54379 bytes --]

[    0.000000] Linux version 2.6.30-rc4-00004-gfb422e6 (name@name) (gcc version 4.4.0 20090130 (experimental) (GCC) ) #8 SMP Sat May 2 13:58:31 PDT 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[    0.000000]  BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 03FF00000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT 3fefd1c0 00074 (v01 APPLE   Apple00 000000A5      01000013)
[    0.000000] ACPI: FACP 3fefb000 000F4 (v03 APPLE   Apple00 000000A5 Loki 0000005F)
[    0.000000] ACPI: DSDT 3fef0000 048D1 (v01 APPLE  MacBookP 00020002 INTL 20050309)
[    0.000000] ACPI: FACS 3fec0000 00040
[    0.000000] ACPI: HPET 3fefa000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 3fef9000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: MCFG 3fef8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! 3fef7000 000A0 (v32 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 3fef6000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 3fef5000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 3feef000 004DC (v01 APPLE     CpuPm 00003000 INTL 20050309)
[    0.000000] ACPI: SSDT 3febd000 0064F (v01 SataRe  SataPri 00001000 INTL 20050309)
[    0.000000] ACPI: SSDT 3febc000 0069C (v01 SataRe  SataSec 00001000 INTL 20050309)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 120MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 0000694a90]    TEXT DATA BSS ==> [0000100000 - 0000694a90]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [0000695000 - 00006981f9]              BRK ==> [0000695000 - 00006981f9]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f0ea
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f0ea
[    0.000000] On node 0 totalpages: 258185
[    0.000000] free_area_init_node: node 0, pgdat c0569ec0, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 242 pages used for memmap
[    0.000000]   HighMem zone: 30714 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[    0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages at c17f0000, static data 31324 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256167
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-rc4-00004-gfb422e6 root=/dev/sda1 vga=790 debug pnpacpi=off pci=routeirq audit=1 selinux=1 enforcing=0
[    0.000000] audit: enabled (after initialization)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:320
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2161.121 MHz processor.
[    0.010000] Console: colour dummy device 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.010000] Initializing HighMem for node 0 (000377fe:0003f0ea)
[    0.010000] Memory: 1017616k/1033128k available (2975k kernel code, 14792k reserved, 1622k data, 412k init, 123824k highmem)
[    0.010000] virtual kernel memory layout:
[    0.010000]     fixmap  : 0xfff9d000 - 0xfffff000   ( 392 kB)
[    0.010000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.010000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.010000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.010000]       .init : 0xc0584000 - 0xc05eb000   ( 412 kB)
[    0.010000]       .data : 0xc03e7ffd - 0xc057db38   (1622 kB)
[    0.010000]       .text : 0xc0100000 - 0xc03e7ffd   (2975 kB)
[    0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.010000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.010000] hpet clockevent registered
[    0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.24 BogoMIPS (lpj=21611210)
[    0.010000] Security Framework initialized
[    0.010000] SELinux:  Initializing.
[    0.010000] SELinux:  Starting in permissive mode
[    0.010000] Mount-cache hash table entries: 512
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 4096K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 0
[    0.010000] Intel machine check architecture supported.
[    0.010000] Intel machine check reporting enabled on CPU#0.
[    0.010000] using mwait in idle threads.
[    0.010000] Checking 'hlt' instruction... OK.
[    0.040936] ACPI: Core revision 20090320
[    0.059762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.159777] CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
[    0.160000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.010000] Initializing CPU#1
[    0.010000] Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=21612604)
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 4096K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 1
[    0.010000] Intel machine check architecture supported.
[    0.010000] Intel machine check reporting enabled on CPU#1.
[    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.311860] CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
[    0.311894] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.320034] Brought up 2 CPUs
[    0.320039] Total of 2 processors activated (8644.76 BogoMIPS).
[    0.320106] CPU0 attaching sched-domain:
[    0.320112]  domain 0: span 0-1 level MC
[    0.320116]   groups: 0 1
[    0.320123] CPU1 attaching sched-domain:
[    0.320127]  domain 0: span 0-1 level MC
[    0.320131]   groups: 1 0
[    0.320219] net_namespace: 832 bytes
[    0.320505] Booting paravirtualized kernel on bare hardware
[    0.320505] NET: Registered protocol family 16
[    0.320505] EISA bus registered
[    0.320505] ACPI: bus type pci registered
[    0.320505] PCI: Using configuration type 1 for base access
[    0.330073] bio: create slab <bio-0> at 0
[    0.331038] ACPI: EC: EC description table is found, configuring boot EC
[    0.331282] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.354896] ACPI: BIOS _OSI(Linux) query ignored
[    0.355955] ACPI: Interpreter enabled
[    0.355965] ACPI: (supports S0 S3 S4 S5)
[    0.356043] ACPI: Using IOAPIC for interrupt routing
[    0.380487] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.380487] ACPI: EC: driver started in interrupt mode
[    0.390728] ACPI: No dock devices found.
[    0.391354] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.391420] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.391420] pci 0000:00:01.0: PME# disabled
[    0.391420] pci 0000:00:07.0: reg 10 32bit mmio: [0x50404000-0x50404fff]
[    0.391420] pci 0000:00:1b.0: reg 10 64bit mmio: [0x50400000-0x50403fff]
[    0.391420] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.391420] pci 0000:00:1b.0: PME# disabled
[    0.391420] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.391420] pci 0000:00:1c.0: PME# disabled
[    0.391420] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.391420] pci 0000:00:1c.1: PME# disabled
[    0.391420] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.391420] pci 0000:00:1c.2: PME# disabled
[    0.391420] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
[    0.391420] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f]
[    0.391420] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[    0.391420] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f]
[    0.391420] pci 0000:00:1d.7: reg 10 32bit mmio: [0x50405400-0x504057ff]
[    0.391420] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.391420] pci 0000:00:1d.7: PME# disabled
[    0.391420] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.391420] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.391420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[    0.391420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    0.391420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[    0.391420] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df]
[    0.391420] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef]
[    0.391420] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7]
[    0.391420] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb]
[    0.391420] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf]
[    0.391429] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf]
[    0.391440] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7]
[    0.391450] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7]
[    0.391460] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3]
[    0.391470] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af]
[    0.391481] pci 0000:00:1f.2: reg 24 32bit mmio: [0x50405000-0x504053ff]
[    0.391514] pci 0000:00:1f.2: PME# supported from D3hot
[    0.391520] pci 0000:00:1f.2: PME# disabled
[    0.391588] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
[    0.391671] pci 0000:01:00.0: reg 10 32bit mmio: [0x40000000-0x47ffffff]
[    0.391682] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[    0.391693] pci 0000:01:00.0: reg 18 32bit mmio: [0x50300000-0x5030ffff]
[    0.391715] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.391744] pci 0000:01:00.0: supports D1 D2
[    0.391806] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[    0.391812] pci 0000:00:01.0: bridge 32bit mmio: [0x50300000-0x503fffff]
[    0.391819] pci 0000:00:01.0: bridge 64bit mmio pref: [0x40000000-0x47ffffff]
[    0.391913] pci 0000:02:00.0: reg 10 64bit mmio: [0x50200000-0x50203fff]
[    0.391927] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff]
[    0.391965] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.392023] pci 0000:02:00.0: supports D1 D2
[    0.392027] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.392036] pci 0000:02:00.0: PME# disabled
[    0.392102] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.392109] pci 0000:00:1c.0: bridge 32bit mmio: [0x50200000-0x502fffff]
[    0.392192] pci 0000:03:00.0: reg 10 64bit mmio: [0x50100000-0x5010ffff]
[    0.392288] pci 0000:03:00.0: supports D1
[    0.392292] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.392301] pci 0000:03:00.0: PME# disabled
[    0.392379] pci 0000:00:1c.1: bridge 32bit mmio: [0x50100000-0x501fffff]
[    0.392450] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff]
[    0.392458] pci 0000:00:1c.2: bridge 32bit mmio: [0x4c100000-0x500fffff]
[    0.392468] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x48000000-0x4bffffff]
[    0.392535] pci 0000:0c:03.0: reg 10 32bit mmio: [0x4c004000-0x4c0047ff]
[    0.392547] pci 0000:0c:03.0: reg 14 32bit mmio: [0x4c000000-0x4c003fff]
[    0.392614] pci 0000:0c:03.0: supports D1 D2
[    0.392618] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[    0.392626] pci 0000:0c:03.0: PME# disabled
[    0.392689] pci 0000:00:1e.0: transparent bridge
[    0.392699] pci 0000:00:1e.0: bridge 32bit mmio: [0x4c000000-0x4c0fffff]
[    0.392737] pci_bus 0000:00: on NUMA node 0
[    0.392751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.393734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.394055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.394368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.394681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.395023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.420228] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.420517] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.420801] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.421085] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.421367] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.421651] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.421934] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.422214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.422331] SCSI subsystem initialized
[    0.422331] libata version 3.00 loaded.
[    0.422331] usbcore: registered new interface driver usbfs
[    0.422331] usbcore: registered new interface driver hub
[    0.422331] usbcore: registered new device driver usb
[    0.422331] PCI: Using ACPI for IRQ routing
[    0.422331] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[    0.422331] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.422331] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.422331] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.422331] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.422331] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.422331] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.422331] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.422331] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.422331] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.422331] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.422331] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.422331] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.422331] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.422331] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.422331] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.422331] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.422331] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.422331] pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.600069] cfg80211: Using static regulatory domain info
[    0.600069] cfg80211: Regulatory domain: US
[    0.600069] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.600069] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    0.600073] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.600077] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.600083] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.600087] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.600092] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    0.600101] NetLabel: Initializing
[    0.600104] NetLabel:  domain hash size = 128
[    0.600107] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.600188] NetLabel:  unlabeled traffic allowed by default
[    0.600202] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.600210] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.602220] cfg80211: Calling CRDA for country: US
[    0.620008] Switched to high resolution mode on CPU 0
[    0.621926] Switched to high resolution mode on CPU 1
[    0.650031] pnp: PnP ACPI: disabled
[    0.686032] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.686039] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
[    0.686045] pci 0000:00:01.0:   MEM window: 0x50300000-0x503fffff
[    0.686051] pci 0000:00:01.0:   PREFETCH window: 0x00000040000000-0x00000047ffffff
[    0.686061] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.686067] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.686076] pci 0000:00:1c.0:   MEM window: 0x50200000-0x502fffff
[    0.686083] pci 0000:00:1c.0:   PREFETCH window: 0x00000050500000-0x000000505fffff
[    0.686094] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.686098] pci 0000:00:1c.1:   IO window: disabled
[    0.686107] pci 0000:00:1c.1:   MEM window: 0x50100000-0x501fffff
[    0.686114] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.686124] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.686130] pci 0000:00:1c.2:   IO window: 0x1000-0x1fff
[    0.686138] pci 0000:00:1c.2:   MEM window: 0x4c100000-0x500fffff
[    0.686145] pci 0000:00:1c.2:   PREFETCH window: 0x00000048000000-0x0000004bffffff
[    0.686157] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[    0.686161] pci 0000:00:1e.0:   IO window: disabled
[    0.686169] pci 0000:00:1e.0:   MEM window: 0x4c000000-0x4c0fffff
[    0.686176] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.686190] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.686197] pci 0000:00:01.0: setting latency timer to 64
[    0.686206] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.686214] pci 0000:00:1c.0: setting latency timer to 64
[    0.686224] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.686231] pci 0000:00:1c.1: setting latency timer to 64
[    0.686241] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.686248] pci 0000:00:1c.2: setting latency timer to 64
[    0.686414] pci 0000:00:1e.0: power state changed by ACPI to D0
[    0.686424] pci 0000:00:1e.0: setting latency timer to 64
[    0.686430] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.686435] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.686440] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
[    0.686444] pci_bus 0000:01: resource 1 mem: [0x50300000-0x503fffff]
[    0.686449] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x47ffffff]
[    0.686454] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.686458] pci_bus 0000:02: resource 1 mem: [0x50200000-0x502fffff]
[    0.686463] pci_bus 0000:02: resource 2 pref mem [0x50500000-0x505fffff]
[    0.686468] pci_bus 0000:03: resource 1 mem: [0x50100000-0x501fffff]
[    0.686473] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
[    0.686477] pci_bus 0000:04: resource 1 mem: [0x4c100000-0x500fffff]
[    0.686482] pci_bus 0000:04: resource 2 pref mem [0x48000000-0x4bffffff]
[    0.686487] pci_bus 0000:0c: resource 1 mem: [0x4c000000-0x4c0fffff]
[    0.686491] pci_bus 0000:0c: resource 3 io:  [0x00-0xffff]
[    0.686496] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff]
[    0.686533] NET: Registered protocol family 2
[    0.800071] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.800455] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.800922] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[    0.801541] TCP: Hash tables configured (established 131072 bind 65536)
[    0.801546] TCP reno registered
[    0.830140] NET: Registered protocol family 1
[    0.831032] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.833240] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.834855] Initializing RT-Tester: OK
[    0.834983] audit: initializing netlink socket (enabled)
[    0.835005] type=2000 audit(1242083362.830:1): initialized
[    0.843685] highmem bounce pool size: 64 pages
[    0.843694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.861890] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.862196] fuse init (API version 7.11)
[    0.862855] msgmni has been set to 1746
[    0.863117] SELinux:  Registering netfilter hooks
[    0.863996] alg: No test for stdrng (krng)
[    0.864019] io scheduler noop registered
[    0.864397] io scheduler cfq registered (default)
[    0.864543] pci 0000:01:00.0: Boot video device
[    0.864927] rivafb_setup START
[    0.865055] nvidiafb_setup START
[    0.865627] vesafb: framebuffer at 0x40000000, mapped to 0xf8100000, using 3072k, total 16384k
[    0.865634] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[    0.865639] vesafb: protected mode interface info at c000:ad0c
[    0.865643] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[    0.865648] vesafb: scrolling: redraw
[    0.865652] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
[    0.890115] Console: switching to colour frame buffer device 128x48
[    0.912330] fb0: VESA VGA frame buffer device
[    0.928406] loop: module loaded
[    0.928726] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.929422] Driver 'sd' needs updating - please use bus_type methods
[    0.929828] Driver 'sr' needs updating - please use bus_type methods
[    0.931055] ata_piix 0000:00:1f.1: version 2.12
[    0.931365] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.931664] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.932036] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.932407] scsi0 : ata_piix
[    0.934770] scsi1 : ata_piix
[    0.937008] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[    0.937328] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[    0.937670] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.938000] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    1.090026] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.090463] scsi2 : ata_piix
[    1.090903] scsi3 : ata_piix
[    1.102379] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[    1.110319] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[    1.112999] ata1.00: ATAPI: MATSHITADVD-R   UJ-857D, KCV9, max UDMA/66
[    1.126770] usbcore: registered new interface driver usblcd
[    1.134733] usbcore: registered new interface driver usbled
[    1.142886] PNP: No PS/2 controller found. Probing ports directly.
[    1.151492] i8042.c: No controller found.
[    1.159486] mice: PS/2 mouse device common for all mice
[    1.167335] Linux video capture interface: v2.00
[    1.172913] ata1.00: configured for UDMA/66
[    1.184292] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    1.192430] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857D  KCV9 PQ: 0 ANSI: 5
[    1.192448] EDAC MC: Ver: 2.1.0 May  2 2009
[    1.193026] EISA: Probing bus 0 at eisa.0
[    1.193151] cpuidle: using governor ladder
[    1.193152] cpuidle: using governor menu
[    1.195561] usbcore: registered new interface driver hiddev
[    1.195680] usbcore: registered new interface driver usbhid
[    1.195683] usbhid: v2.6:USB HID core driver
[    1.195816] Advanced Linux Sound Architecture Driver Version 1.0.19.
[    1.195818] ALSA device list:
[    1.195819]   No soundcards found.
[    1.196011] oprofile: using NMI interrupt.
[    1.196287] IPVS: Registered protocols (TCP, AH, ESP)
[    1.196476] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    1.196505] IPVS: ipvs loaded.
[    1.196859] Initializing XFRM netlink socket
[    1.196875] NET: Registered protocol family 17
[    1.196882] NET: Registered protocol family 15
[    1.196903] Using IPI No-Shortcut mode
[    1.344633] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.352710] Uniform CD-ROM driver Revision: 3.20
[    1.360459] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.368213] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[    1.375816] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.383918] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.423052] ata3.01: configured for UDMA/100
[    1.561265] scsi 2:0:1:0: Direct-Access     ATA      FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[    1.569859] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    1.577994] sd 2:0:1:0: [sda] Write Protect is off
[    1.586056] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.594115] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.602714]  sda:<5>sd 2:0:1:0: Attached scsi generic sg1 type 0
[    1.611278]  sda1 sda2
[    1.620442] sd 2:0:1:0: [sda] Attached SCSI disk
[    1.820516] kjournald starting.  Commit interval 5 seconds
[    1.828863] EXT3-fs: mounted filesystem with writeback data mode.
[    1.837475] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[    1.846140] Freeing unused kernel memory: 412k freed
[    2.413264] SELinux: 8192 avtab hash slots, 173690 rules.
[    2.527132] SELinux: 8192 avtab hash slots, 173690 rules.
[    2.726506] SELinux:  7 users, 9 roles, 3231 types, 100 bools
[    2.735049] SELinux:  73 classes, 173690 rules
[    2.750633] SELinux:  class kernel_service not defined in policy
[    2.758829] SELinux:  permission open in class sock_file not defined in policy
[    2.767139] SELinux:  permission nlmsg_tty_audit in class netlink_audit_socket not defined in policy
[    2.775709] SELinux: the above unknown classes and permissions will be denied
[    2.784242] SELinux:  Completing initialization.
[    2.792856] SELinux:  Setting up existing superblocks.
[    2.818438] SELinux: initialized (dev sda1, type ext3), uses xattr
[    2.827402] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.836324] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    2.845186] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[    2.854051] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.863013] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[    2.872062] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.881122] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    2.890208] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.899195] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.908348] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.917461] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.926734] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    2.935904] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.945038] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    3.076416] type=1403 audit(1242083365.070:2): policy loaded auid=4294967295 ses=4294967295
[    4.098489] applesmc: Apple MacBook Pro detected:
[    4.107831] applesmc:  - Model with accelerometer
[    4.117398] applesmc:  - Model with light sensors and backlight
[    4.126870] applesmc:  - Model with 12 temperature sensors
[    4.200617] applesmc: device successfully initialized (0xe0, 0x00).
[    4.200619] applesmc: device successfully initialized.
[    4.210835] applesmc: 2 fans found.
[    4.221452] input: applesmc as /devices/platform/applesmc.768/input/input1
[    4.230906] Registered led device: smc::kbd_backlight
[    4.240327] applesmc: driver successfully loaded.
[    4.272543] usbcore: registered new interface driver appletouch
[    4.289699] ACPI: SSDT 3feb8c10 002AE (v01 APPLE   Cpu0Ist 00003000 INTL 20050309)
[    4.300450] ACPI: SSDT 3feb8910 002A0 (v01 APPLE   Cpu0Cst 00003001 INTL 20050309)
[    4.311220] Monitor-Mwait will be used to enter C-1 state
[    4.311260] Monitor-Mwait will be used to enter C-2 state
[    4.311297] Monitor-Mwait will be used to enter C-3 state
[    4.311309] Marking TSC unstable due to TSC halts in idle
[    4.321703] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    4.331725] processor ACPI_CPU:00: registered as cooling_device0
[    4.341782] ACPI: Processor [CPU0] (supports 8 throttling states)
[    4.353262] ACPI: SSDT 3feb8f10 00087 (v01 APPLE   Cpu1Ist 00003000 INTL 20050309)
[    4.364397] ACPI: SSDT 3feb7f10 00085 (v01 APPLE   Cpu1Cst 00003000 INTL 20050309)
[    4.376385] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    4.386676] processor ACPI_CPU:01: registered as cooling_device1
[    4.396729] ACPI: Processor [CPU1] (supports 8 throttling states)
[    4.512922] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.568403] nf_conntrack version 0.5.0 (16142 buckets, 64568 max)
[    4.583083] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    4.597103] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[    4.611341] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    4.640968] arp_tables: (C) 2002 David S. Miller
[    4.713061] usbcore: registered new interface driver isight_firmware
[    4.757586] usbcore: registered new interface driver uvcvideo
[    4.772510] USB Video Class driver (v0.1.0)
[    4.839457] ipmi message handler version 39.2
[    4.869583] IPMI Watchdog: driver initialized
[    4.915410] Bluetooth: Core ver 2.15
[    4.930654] NET: Registered protocol family 31
[    4.945527] Bluetooth: HCI device and connection manager initialized
[    4.960623] Bluetooth: HCI socket layer initialized
[    4.995802] Bluetooth: L2CAP ver 2.13
[    5.010826] Bluetooth: L2CAP socket layer initialized
[    5.045256] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.075270] Bluetooth: Generic Bluetooth USB driver ver 0.5
[    5.090270] usbcore: registered new interface driver btusb
[    5.123084] Bluetooth: RFCOMM socket layer initialized
[    5.137911] Bluetooth: RFCOMM TTY layer initialized
[    5.152624] Bluetooth: RFCOMM ver 1.11
[    5.178543] Bluetooth: SCO (Voice Link) ver 0.6
[    5.192908] Bluetooth: SCO socket layer initialized
[    5.213639] Bluetooth: HCI UART driver ver 2.2
[    5.228197] Bluetooth: HCI H4 protocol initialized
[    5.242819] Bluetooth: HCI BCSP protocol initialized
[    5.379273] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.868431] udev: starting version 137
[    6.023186] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    6.037461] ACPI: Power Button [PWRF]
[    6.051759] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    6.131498] uhci_hcd: USB Universal Host Controller Interface driver
[    6.146277] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.160973] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    6.160981] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    6.175543] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    6.175807] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    6.190238] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[    6.205109] usb usb1: configuration #1 chosen from 1 choice
[    6.219640] hub 1-0:1.0: USB hub found
[    6.233846] hub 1-0:1.0: 2 ports detected
[    6.246966] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.257751] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    6.257755] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    6.268187] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    6.278448] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[    6.288697] usb usb2: configuration #1 chosen from 1 choice
[    6.298754] hub 2-0:1.0: USB hub found
[    6.308534] hub 2-0:1.0: 2 ports detected
[    6.318274] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.327662] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    6.327667] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    6.336899] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    6.346224] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    6.355520] usb usb3: configuration #1 chosen from 1 choice
[    6.364927] hub 3-0:1.0: USB hub found
[    6.374000] hub 3-0:1.0: 2 ports detected
[    6.383386] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    6.392612] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    6.392617] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    6.401702] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    6.410960] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[    6.420117] usb usb4: configuration #1 chosen from 1 choice
[    6.429041] hub 4-0:1.0: USB hub found
[    6.437783] hub 4-0:1.0: 2 ports detected
[    6.449235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.457935] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    6.467076] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.476100] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    6.476104] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    6.485048] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    6.498067] ehci_hcd 0000:00:1d.7: debug port 1
[    6.507041] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    6.507062] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[    6.544331] ACPI: Lid Switch [LID0]
[    6.554065] power_supply ADP1: uevent
[    6.554068] power_supply ADP1: No power supply yet
[    6.554089] power_supply ADP1: power_supply_changed
[    6.554097] ACPI: AC Adapter [ADP1] (on-line)
[    6.563630] power_supply ADP1: power_supply_changed_work
[    6.563770] power_supply ADP1: power_supply_update_gen_leds 1
[    6.563786] power_supply ADP1: uevent
[    6.563788] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[    6.563793] power_supply ADP1: Static prop TYPE=Mains
[    6.563796] power_supply ADP1: 1 dynamic props
[    6.563799] power_supply ADP1: prop ONLINE=1
[    6.657268] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    6.658654] sky2 driver version 1.22
[    6.658701] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.658714] sky2 0000:02:00.0: setting latency timer to 64
[    6.658752] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[    6.658892] sky2 0000:02:00.0: irq 24 for MSI/MSI-X
[    6.692546] usb usb5: configuration #1 chosen from 1 choice
[    6.692560] sky2 eth0: addr 00:17:f2:cb:e3:71
[    6.709252] hub 5-0:1.0: USB hub found
[    6.717505] hub 5-0:1.0: 8 ports detected
[    6.726199] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.776939] power_supply BAT0: uevent
[    6.776941] power_supply BAT0: No power supply yet
[    6.776993] power_supply BAT0: power_supply_changed
[    6.777167] power_supply BAT0: power_supply_changed_work
[    6.788533] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.796952] ath9k 0000:03:00.0: setting latency timer to 64
[    6.898258] ACPI: Battery Slot [BAT0] (battery present)
[    6.946723] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    6.946852] phy0: Selected rate control algorithm 'ath9k_rate_control'
[    6.950207] Registered led device: ath9k-phy0::radio
[    6.950267] Registered led device: ath9k-phy0::assoc
[    6.950325] Registered led device: ath9k-phy0::tx
[    6.950383] Registered led device: ath9k-phy0::rx
[    6.950415] phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xf8b00000, irq=17
[    6.998167] ACPI: Power Button [PWRB]
[    7.000271] ohci1394 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    7.016116] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[    7.025126] ACPI: Sleep Button [SLPB]
[    7.053559] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[4c004000-4c0047ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[    7.084046] power_supply BAT0: power_supply_update_bat_leds 0
[    7.084065] power_supply BAT0: uevent
[    7.084067] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[    7.084072] power_supply BAT0: Static prop TYPE=Battery
[    7.084075] power_supply BAT0: 13 dynamic props
[    7.084079] power_supply BAT0: prop STATUS=Unknown
[    7.084083] power_supply BAT0: prop PRESENT=1
[    7.084087] power_supply BAT0: prop TECHNOLOGY=Unknown
[    7.084091] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[    7.084095] power_supply BAT0: prop VOLTAGE_NOW=12502000
[    7.084099] power_supply BAT0: prop CURRENT_NOW=0
[    7.084102] power_supply BAT0: prop POWER_NOW=0
[    7.084106] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[    7.084110] power_supply BAT0: prop ENERGY_FULL=50520000
[    7.084114] power_supply BAT0: prop ENERGY_NOW=49560000
[    7.084117] power_supply BAT0: prop MODEL_NAME=ASMB012
[    7.084121] power_supply BAT0: prop MANUFACTURER=SMPN012
[    7.084124] power_supply BAT0: prop SERIAL_NUMBER=
[    7.085014] power_supply BAT0: uevent
[    7.085016] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[    7.085022] power_supply BAT0: Static prop TYPE=Battery
[    7.085025] power_supply BAT0: 13 dynamic props
[    7.085028] power_supply BAT0: prop STATUS=Unknown
[    7.085032] power_supply BAT0: prop PRESENT=1
[    7.085036] power_supply BAT0: prop TECHNOLOGY=Unknown
[    7.085040] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[    7.085044] power_supply BAT0: prop VOLTAGE_NOW=12502000
[    7.085047] power_supply BAT0: prop CURRENT_NOW=0
[    7.085051] power_supply BAT0: prop POWER_NOW=0
[    7.085054] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[    7.085058] power_supply BAT0: prop ENERGY_FULL=50520000
[    7.085062] power_supply BAT0: prop ENERGY_NOW=49560000
[    7.085065] power_supply BAT0: prop MODEL_NAME=ASMB012
[    7.085069] power_supply BAT0: prop MANUFACTURER=SMPN012
[    7.085072] power_supply BAT0: prop SERIAL_NUMBER=
[    7.261102] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.273769] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.422586] usb 5-4: new high speed USB device using ehci_hcd and address 3
[    7.435643] hda_codec: STAC922x, Apple subsys_id=106b1e00
[    7.470890] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6
[    7.484516] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7
[    7.500018] Clocksource tsc unstable (delta = -64450321 ns)
[    7.600774] usb 5-4: configuration #1 chosen from 1 choice
[    7.614493] usb 5-4: firmware: requesting isight.fw
[    7.894406] Adding 2982500k swap on /dev/sda2.  Priority:1 extents:1 across:2982500k 
[    8.280016] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    8.400313] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0019e3fffe2ad87e]
[    8.504893] usb 1-2: configuration #1 chosen from 1 choice
[    8.643132] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input8
[    8.766199] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[    8.793753] appletouch: Geyser mode initialized.
[    8.805565] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input9
[    8.823979] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2/input/input10
[    8.848728] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[    9.150092] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    9.359712] usb 3-2: configuration #1 chosen from 1 choice
[    9.385653] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[    9.670098] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    9.890560] usb 4-1: configuration #1 chosen from 1 choice
[    9.939935] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input11
[    9.958864] generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[    9.995898] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input12
[   10.015981] generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[  148.251792] EXT3 FS on sda1, internal journal
[  148.340775] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[  151.197363] power_supply ADP1: uevent
[  151.197370] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[  151.197387] power_supply ADP1: Static prop TYPE=Mains
[  151.197395] power_supply ADP1: 1 dynamic props
[  151.197403] power_supply ADP1: prop ONLINE=1
[  151.218096] power_supply BAT0: uevent
[  151.218102] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[  151.218116] power_supply BAT0: Static prop TYPE=Battery
[  151.218123] power_supply BAT0: 13 dynamic props
[  151.264518] power_supply BAT0: prop STATUS=Unknown
[  151.264531] power_supply BAT0: prop PRESENT=1
[  151.264541] power_supply BAT0: prop TECHNOLOGY=Unknown
[  151.264551] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[  151.264559] power_supply BAT0: prop VOLTAGE_NOW=12501000
[  151.264568] power_supply BAT0: prop CURRENT_NOW=0
[  151.264577] power_supply BAT0: prop POWER_NOW=0
[  151.264586] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[  151.264595] power_supply BAT0: prop ENERGY_FULL=50520000
[  151.264604] power_supply BAT0: prop ENERGY_NOW=49560000
[  151.264613] power_supply BAT0: prop MODEL_NAME=ASMB012
[  151.264622] power_supply BAT0: prop MANUFACTURER=SMPN012
[  151.264631] power_supply BAT0: prop SERIAL_NUMBER=
[  152.334002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  152.334008] Bluetooth: BNEP filters: protocol multicast
[  152.670285] usb 4-1: USB disconnect, address 2
[  153.100156] usb 4-1: new full speed USB device using uhci_hcd and address 3
[  153.316594] usb 4-1: configuration #1 chosen from 1 choice
[  153.412690] applesmc: light sensor data length set to 6
[  159.881230] sky2 eth0: enabling interface
[  160.505507] input: jmattock’s mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/bluetooth/hci0/hci0:46/input13
[  160.505777] generic-bluetooth 0005:0000:0000.0006: input: BLUETOOTH HID v0.00 Mouse [jmattock’s mouse] on 00:17:F2:B4:BC:F5
[  161.725072] type=1100 audit(1242083523.805:3): user pid=1615 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:local_login_t
msg='op=PAM:authentication acct="name" exe="/bin/login" (hostname=?, addr=?, terminal=tty1 res=success)'
[  161.729770] type=1101 audit(1242083523.805:4): user pid=1615 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:local_login_t
msg='op=PAM:accounting acct="name" exe="/bin/login" (hostname=?, addr=?, terminal=tty1 res=success)'
[  161.756716] type=1103 audit(1242083523.835:5): user pid=1615 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:local_login_t
msg='op=PAM:setcred acct="name" exe="/bin/login" (hostname=?, addr=?, terminal=tty1 res=success)'
[  161.794141] type=1006 audit(1242083523.875:6): login pid=1615 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1
[  161.834159] type=2300 audit(1242083523.915:7): user pid=1615 uid=0 auid=1000 ses=1 subj=system_u:system_r:local_login_t msg='pam:
default-context=name:sysadm_r:sysadm_t selected-context=name:sysadm_r:sysadm_t: exe="/bin/login" (hostname=?, addr=?, terminal=tty1 res=success)'
[  161.844674] type=1105 audit(1242083523.925:8): user pid=1615 uid=0 auid=1000 ses=1 subj=system_u:system_r:local_login_t
msg='op=PAM:session_open acct="name" exe="/bin/login" (hostname=?, addr=?, terminal=tty1 res=success)'
[  161.845537] type=1112 audit(1242083523.925:9): user pid=1615 uid=0 auid=1000 ses=1 subj=system_u:system_r:local_login_t msg='op=login id=1000 exe="/bin/login" (hostname=?, addr=?, terminal=tty1 res=success)'
[  162.517663] type=1401 audit(1242083524.595:10): SELinux:  unrecognized netlink message type=28265 for sclass=43
[  162.517667] 
[  162.517786] type=1300 audit(1242083524.595:10): arch=40000003 syscall=4 success=yes exit=18 a0=2 a1=806c237 a2=12 a3=12 items=0 ppid=1614 pid=1673 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" subj=system_u:system_r:ifconfig_t key=(null)
[  162.523181] type=1401 audit(1242083524.605:11): SELinux:  unrecognized netlink message type=28265 for sclass=43
[  162.523185] 
[  162.523302] type=1300 audit(1242083524.605:11): arch=40000003 syscall=4 success=yes exit=18 a0=2 a1=806c237 a2=12 a3=12 items=0 ppid=1614 pid=1674 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" subj=system_u:system_r:ifconfig_t key=(null)
[  164.866737] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  164.925476] Linux agpgart interface v0.103
[  164.968714] [drm] Initialized drm 1.1.0 20060810
[  164.995563] pci 0000:01:00.0: setting latency timer to 64
[  164.995973] [drm] Initialized radeon 1.29.0 20080528 for 0000:01:00.0 on minor 0
[  165.513545] [drm] Setting GART location based on new memory map
[  165.514734] [drm] Loading R500 Microcode
[  165.514805] [drm] Num pipes: 1
[  165.514822] [drm] writeback test succeeded in 1 usecs
[  166.779859] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  166.972575] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[  167.172576] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[  167.370092] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
[  174.911738] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  174.916121] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  175.110036] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[  175.310038] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[  175.510028] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
[  182.977703] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  182.985831] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  183.180063] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[  183.380130] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[  183.580116] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
[  191.067748] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  191.075882] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  191.270132] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[  191.470135] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[  191.670130] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
[  199.127756] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  199.135882] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  199.340055] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[  199.540060] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[  199.730072] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
[  207.207678] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  207.215905] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
[  207.410080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
[  207.610129] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
[  207.810128] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out




lspci


00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:07.0 Performance counters: Intel Corporation Device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
03:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
0c:03.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
`

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Evgeni Golov]

On Mon, 11 May 2009 23:53:13 +0200 Jiri Slaby wrote:

> > in dmesg I see:
> > 
> > [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > 
> > The type of encryption used is just
> > a standard WEP key(no WPA).

Same here with 2.6.30-rc4, b43 and either Cisco (MAC-Addr starts with
00:40:96) or HP ProCurve (??? - they do WiFi? - MAC-Addr starts with
00:1F:FE) APs. No encryption, quite noisy environment (University).

No problem with ipw2200 (actually 2915) in the same hardware (Thinkpad
X31). Neither with the b43 and a standard Linksys WRT54GL (in the same!
noisy university-env).

Regards
Evgeni

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Evgeni Golov]

On Mon, 11 May 2009 23:53:13 +0200 Jiri Slaby wrote:

> > in dmesg I see:
> > 
> > [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > 
> > The type of encryption used is just
> > a standard WEP key(no WPA).

Same here with 2.6.30-rc4, b43 and either Cisco (MAC-Addr starts with
00:40:96) or HP ProCurve (??? - they do WiFi? - MAC-Addr starts with
00:1F:FE) APs. No encryption, quite noisy environment (University).

No problem with ipw2200 (actually 2915) in the same hardware (Thinkpad
X31). Neither with the b43 and a standard Linksys WRT54GL (in the same!
noisy university-env).

Regards
Evgeni

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin Mattock]

On Tue, May 12, 2009 at 3:39 AM, Evgeni Golov <sargentd@die-welt.net> wrote:
>
>
> On Mon, 11 May 2009 23:53:13 +0200 Jiri Slaby wrote:
>
>> > in dmesg I see:
>> >
>> > [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
>> > [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
>> > [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
>> > [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
>> > [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
>> > [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
>> > [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
>> > [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
>> >
>> > The type of encryption used is just
>> > a standard WEP key(no WPA).
>
> Same here with 2.6.30-rc4, b43 and either Cisco (MAC-Addr starts with
> 00:40:96) or HP ProCurve (??? - they do WiFi? - MAC-Addr starts with
> 00:1F:FE) APs. No encryption, quite noisy environment (University).
>
> No problem with ipw2200 (actually 2915) in the same hardware (Thinkpad
> X31). Neither with the b43 and a standard Linksys WRT54GL (in the same!
> noisy university-env).
>
> Regards
> Evgeni
>
>

are you able to connect?
(or is the connection connecting but really
poor quality?)
over here 2.6.29-rc8 connects like
theirs no tomorrow, as soon as
I throw in 2.6.30-rc4 it just dead(although
on some accounts I did get some kind of
reaction, but not much, just what I see in dmesg).

-- 
Justin P. Mattock

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Evgeni Golov]

[-- Attachment #1: Type: text/plain, Size: 1086 bytes --]

On Tue, 12 May 2009 07:28:04 -0700 Justin Mattock wrote:

> > Same here with 2.6.30-rc4, b43 and either Cisco (MAC-Addr starts with
> > 00:40:96) or HP ProCurve (??? - they do WiFi? - MAC-Addr starts with
> > 00:1F:FE) APs. No encryption, quite noisy environment (University).
> >
> > No problem with ipw2200 (actually 2915) in the same hardware (Thinkpad
> > X31). Neither with the b43 and a standard Linksys WRT54GL (in the same!
> > noisy university-env).
> >
> > Regards
> > Evgeni
> >
> >
> 
> are you able to connect?
> (or is the connection connecting but really
> poor quality?)
> over here 2.6.29-rc8 connects like
> theirs no tomorrow, as soon as
> I throw in 2.6.30-rc4 it just dead(although
> on some accounts I did get some kind of
> reaction, but not much, just what I see in dmesg).

2.6.29: fairly stable, even if not as good as with an intel card.
2.6.30-rc4: tons of timeouts, may connect 1 in 100 tries, connection
will drop after some (short) time.

-- 
Bruce Schneier Fact Number 79:
Bruce Schneier once decrypted a box of AlphaBits.

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin Mattock]

On Tue, May 12, 2009 at 10:46 AM, Evgeni Golov <sargentd@die-welt.net> wrote:
> On Tue, 12 May 2009 07:28:04 -0700 Justin Mattock wrote:
>
>> > Same here with 2.6.30-rc4, b43 and either Cisco (MAC-Addr starts with
>> > 00:40:96) or HP ProCurve (??? - they do WiFi? - MAC-Addr starts with
>> > 00:1F:FE) APs. No encryption, quite noisy environment (University).
>> >
>> > No problem with ipw2200 (actually 2915) in the same hardware (Thinkpad
>> > X31). Neither with the b43 and a standard Linksys WRT54GL (in the same!
>> > noisy university-env).
>> >
>> > Regards
>> > Evgeni
>> >
>> >
>>
>> are you able to connect?
>> (or is the connection connecting but really
>> poor quality?)
>> over here 2.6.29-rc8 connects like
>> theirs no tomorrow, as soon as
>> I throw in 2.6.30-rc4 it just dead(although
>> on some accounts I did get some kind of
>> reaction, but not much, just what I see in dmesg).
>
> 2.6.29: fairly stable, even if not as good as with an intel card.
> 2.6.30-rc4: tons of timeouts, may connect 1 in 100 tries, connection
> will drop after some (short) time.
>
> --
> Bruce Schneier Fact Number 79:
> Bruce Schneier once decrypted a box of AlphaBits.
>

O.K. after trial and error reverting this:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=47afbaf5af9454a7a1a64591e20cbfcc27ca67a8;hp=853da11b94e674445e93660f47a5f0aeeea09623

brings life back to the macbook with 2.6.30-rc4
(not sure about the iphone anomaly though, I'll keep
an eye on that)

-- 
Justin P. Mattock

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Luis R. Rodriguez]

On Tue, May 12, 2009 at 1:04 PM, Justin Mattock <justinmattock@gmail.com> wrote:
>
>
> On Tue, May 12, 2009 at 10:46 AM, Evgeni Golov <sargentd@die-welt.net> wrote:
>> On Tue, 12 May 2009 07:28:04 -0700 Justin Mattock wrote:
>>
>>> > Same here with 2.6.30-rc4, b43 and either Cisco (MAC-Addr starts with
>>> > 00:40:96) or HP ProCurve (??? - they do WiFi? - MAC-Addr starts with
>>> > 00:1F:FE) APs. No encryption, quite noisy environment (University).
>>> >
>>> > No problem with ipw2200 (actually 2915) in the same hardware (Thinkpad
>>> > X31). Neither with the b43 and a standard Linksys WRT54GL (in the same!
>>> > noisy university-env).
>>> >
>>> > Regards
>>> > Evgeni
>>> >
>>> >
>>>
>>> are you able to connect?
>>> (or is the connection connecting but really
>>> poor quality?)
>>> over here 2.6.29-rc8 connects like
>>> theirs no tomorrow, as soon as
>>> I throw in 2.6.30-rc4 it just dead(although
>>> on some accounts I did get some kind of
>>> reaction, but not much, just what I see in dmesg).
>>
>> 2.6.29: fairly stable, even if not as good as with an intel card.
>> 2.6.30-rc4: tons of timeouts, may connect 1 in 100 tries, connection
>> will drop after some (short) time.
>>
>> --
>> Bruce Schneier Fact Number 79:
>> Bruce Schneier once decrypted a box of AlphaBits.
>>
>
> O.K. after trial and error reverting this:
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=47afbaf5af9454a7a1a64591e20cbfcc27ca67a8;hp=853da11b94e674445e93660f47a5f0aeeea09623
>
> brings life back to the macbook with 2.6.30-rc4
> (not sure about the iphone anomaly though, I'll keep
> an eye on that)

Odd.. are you changing TX power through wext? Because that 47afbaf5
should only make a difference when using manual tx power setting.

  Luis

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin P. Mattock]

On Wed, 2009-05-13 at 01:09 +0200, Johannes Berg wrote:
> On Tue, 2009-05-12 at 16:01 -0700, Luis R. Rodriguez wrote:
> 
> > > O.K. after trial and error reverting this:
> > > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=47afbaf5af9454a7a1a64591e20cbfcc27ca67a8;hp=853da11b94e674445e93660f47a5f0aeeea09623
> > >
> > > brings life back to the macbook with 2.6.30-rc4
> > > (not sure about the iphone anomaly though, I'll keep
> > > an eye on that)
> > 
> > Odd.. are you changing TX power through wext? Because that 47afbaf5
> > should only make a difference when using manual tx power setting.
> 
> Except it introduced a bug which got fixed in -rc5.
> 
> johannes

No,
I try to leave the setting as is.(TX power)

If this is fixed with the latest, then I'll just
go ahead and pull when I get a chance(rather than have
the reverted stuff).

aside from that it interesting, my other machine
(imac) runs fine with ndiswrapper, and wl.

In any case I'll send a post if there's any issues.
(right now watching some hulu recommend session 9 good
flick)

Justin P. Mattock

Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro

[Justin Mattock]

On Tue, May 12, 2009 at 4:36 PM, Justin P. Mattock
<justinmattock@gmail.com> wrote:
> On Wed, 2009-05-13 at 01:09 +0200, Johannes Berg wrote:
>> On Tue, 2009-05-12 at 16:01 -0700, Luis R. Rodriguez wrote:
>>
>> > > O.K. after trial and error reverting this:
>> > > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=47afbaf5af9454a7a1a64591e20cbfcc27ca67a8;hp=853da11b94e674445e93660f47a5f0aeeea09623
>> > >
>> > > brings life back to the macbook with 2.6.30-rc4
>> > > (not sure about the iphone anomaly though, I'll keep
>> > > an eye on that)
>> >
>> > Odd.. are you changing TX power through wext? Because that 47afbaf5
>> > should only make a difference when using manual tx power setting.
>>
>> Except it introduced a bug which got fixed in -rc5.
>>
>> johannes
>
> No,
> I try to leave the setting as is.(TX power)
>
> If this is fixed with the latest, then I'll just
> go ahead and pull when I get a chance(rather than have
> the reverted stuff).
>
> aside from that it interesting, my other machine
> (imac) runs fine with ndiswrapper, and wl.
>
> In any case I'll send a post if there's any issues.
> (right now watching some hulu recommend session 9 good
> flick)
>
> Justin P. Mattock
>
>

hey alright, just pulled linus's
tree, wireless is working
(I'll run it and see if anything weird happens)

-- 
Justin P. Mattock